Hi all,
Anyone had any luck configuring a TSW with RBR or Rally Trophy? I've patched
RBR to 1.02 but still no luck. Any ideas?
TIA,
Timmy
On Fri, 20 May 2005 08:00:50 GMT, Timmy Ferrell wrote:
Works fine here, although I had to tune the brake sensitivity a
bit. What's your exact problem?
cheers, uwe
--
GPG Fingerprint: 2E 13 20 22 9A 3F 63 7F 67 6F E9 B1 A8 36 A4 61
Quoted text (7 lines)
> Hi all, > Anyone had any luck configuring a TSW with RBR or Rally Trophy? I've patched > RBR to 1.02 but still no luck. Any ideas? > TIA, > Timmy > >
"Uwe Sch�rkamp" <[email hidden]> wrote in message
news:[email hidden]...
I'm having trouble with the combined axis for the brake and throttle and
the brake axis is reversed (ie pressure on the brake pedal releases brake).
My TSW is wired for split axis (no selector switch) and I cannot choose
split/combined axis in windows calibration.
Quoted text (15 lines)
> On Fri, 20 May 2005 08:00:50 GMT, Timmy Ferrell wrote: >> Hi all, >> Anyone had any luck configuring a TSW with RBR or Rally Trophy? I've >> patched >> RBR to 1.02 but still no luck. Any ideas? >> TIA, >> Timmy >> >> > > > Works fine here, although I had to tune the brake sensitivity a > bit. What's your exact problem? > > cheers, uweOn Fri, 20 May 2005 16:44:22 GMT, Timmy Ferrell wrote:
> I'm having trouble with the combined axis for the brake and throttle and
> the brake axis is reversed (ie pressure on the brake pedal releases brake).
> My TSW is wired for split axis (no selector switch) and I cannot choose
> split/combined axis in windows calibration.
>
you'll have to make sure that all pot axes "point" into the right
direction. Check your brake pot, it should have three metal soldering
stations, and only two of them have a wire soldered to them.
Take a short piece of wire, solder it onto the empty pot soldering
station, leave the "middle" pot wire alone and unplug the other wire
where it goes into the connector on the pedal base.
Plug in the end of the newly attached wire into the connector where
the "old" wire went into, recalibrate and enjoy.
If things don't work as expected simply unplug the new wire and stick
the old wire back in.
HTH, uwe
PS: This procedure worked on my GAMEPORT tsw, YMMV if you use the USB
model.
--
GPG Fingerprint: 2E 13 20 22 9A 3F 63 7F 67 6F E9 B1 A8 36 A4 61


































