Please help.
Configuration:
AMD 900
128 mb PC-100
Voodoo 3 2000
SB live value
MB Asus A7V
GPL 1,2,0,1
Frame rate fine ( >30) but choppy.
In resolutions less than 1280x1024 everything is OK.
Choppy GPL at 1280x1024 on Voodoo3 2000
Mario Petrinovic found GPL choppy at 1280x1024 on a Voodoo3 2000 despite a good framerate. Replies blamed the card and suggested overclocking, disabling vsync, slot and IRQ changes, and the Glide wrapper. Overclocking helped but did not cure it, so he returned to 1024x768.
Automated summary.
"Mario Petrinovic" <[email hidden]> wrote in message
news:9597se$58sg$[email hidden]...
1280x1024 is pushing it for a V3 2000. You'll need to upgrade you graphics
card to get better performance at this resolution.
Alternatively, if you have good cooling and are willing to take a risk, you
can try overclocking the V3. There are plenty of utilities available to
help you do this. Look at http://www.tweakfiles.com/video/ if you want to
try some.
Bump the speed up in *small* increments, and test thoroughly at each new
level. It might work fine for 5 minutes, but you *really* don't want the
machine crashing just as you are about to cross the line at the end of a
long race......
Ian
Ian Riches
Bedford, UK
Quoted text (14 lines)
> Please help. > > Configuration: > > AMD 900 > 128 mb PC-100 > Voodoo 3 2000 > SB live value > MB Asus A7V > > GPL 1,2,0,1 > Frame rate fine ( >30) but choppy. > In resolutions less than 1280x1024 everything is OK. >Maybe your expecting to much but you should check the following things out.
1. On an A7V make sure your SBlive card is in slot 3. Slot 3 is the only PCI
slot
that doesn't share an interrupt with another slot. You may have to go
into the Bios
and set PCI slot 3 to whatever interrupt is available. You can look at
you current
interrupt allocation with the system information tool under hardware,,,
interrupts.
2. Make sure you have the newest V3 drivers, Get them at www.ammoburners.com
3. Make sure that you are not loading unnecessary programs at startup. you
can check
this buy running ... start ,,, run ,,,, msconfig the look at the startup
tab.
4. I would recommend setting up an static virtual memory and not let windows
allocate it.
With 128megs of ram allocate at least 256megs to virtual memory, Maybe
more depending
on what Applications that you might run.
5. Under 3dfx tools don't turn the LOD , level of detail up leave it at 0
6. Don't put any cards in PCI slot 1 as it shares its interrupt with the AGP
slot.
Maybe one of these might help
Good Luck, DB
Quoted text (13 lines)
> Please help. > > Configuration: > > AMD 900 > 128 mb PC-100 > Voodoo 3 2000 > SB live value > MB Asus A7V > > GPL 1,2,0,1 > Frame rate fine ( >30) but choppy. > In resolutions less than 1280x1024 everything is OK.Thanks.
You are probably right.
I tought GPL isn't graphicaly too hard. But it could be too
high resolution for racing sim (when you scroll all screen
in a turn).
Everyone say that GPL is made for Voodoo, so I thought it
could be OK.
Regarding overclocking, I have tried that (up to 165 Mhz), but think
that graphic card are made too close to limits, unlike CPUs,
so you lose too much stability and gain little performance.
Specialy in racing sims where stability is very inportant.
"Ian Riches" <[email hidden]> wrote in message
news:959cp5$g4lkr$[email hidden]...
>: 1280x1024 is pushing it for a V3 2000. You'll need to upgrade you
graphics
: card to get better performance at this resolution.
:
: Alternatively, if you have good cooling and are willing to take a risk,
you
: can try overclocking the V3. There are plenty of utilities available to
: help you do this. Look at http://www.tweakfiles.com/video/ if you want to
: try some.
:
: Bump the speed up in *small* increments, and test thoroughly at each new
: level. It might work fine for 5 minutes, but you *really* don't want the
: machine crashing just as you are about to cross the line at the end of a
: long race......
:
: Ian
:
: Ian Riches
: Bedford, UK
:
:
Amazingly I did 90% of what you kindly suggested me, already.
Maybe I'm realy expecting too much.
Thx
"DB" <[email hidden]> wrote in message
news:[email hidden]...
: Maybe your expecting to much but you should check the following things
out.
:
: 1. On an A7V make sure your SBlive card is in slot 3. Slot 3 is the only
PCI
: slot
: that doesn't share an interrupt with another slot. You may have to go
: into the Bios
: and set PCI slot 3 to whatever interrupt is available. You can look at
: you current
: interrupt allocation with the system information tool under
hardware,,,
: interrupts.
: 2. Make sure you have the newest V3 drivers, Get them at
www.ammoburners.com
: 3. Make sure that you are not loading unnecessary programs at startup. you
: can check
: this buy running ... start ,,, run ,,,, msconfig the look at the
startup
: tab.
: 4. I would recommend setting up an static virtual memory and not let
windows
: allocate it.
: With 128megs of ram allocate at least 256megs to virtual memory, Maybe
: more depending
: on what Applications that you might run.
: 5. Under 3dfx tools don't turn the LOD , level of detail up leave it at 0
: 6. Don't put any cards in PCI slot 1 as it shares its interrupt with the
AGP
: slot.
:
: Maybe one of these might help
: Good Luck, DB
Just read this bit about setting the ConservativeSwapUsage=1 in
another forum, migjht help a little.
Maxx
Quoted text (10 lines)
> Try managing your swap file instead of letting windows do it.. Set > it 350 min & max with 128 mb of ram... Also add a line in your > sys.ini under 386enh like this: > > ConservativeSwapUsage=1 > > These changes make your operating system respond more like a gaming > machine. If you run heavy cad/cam you might have to switch it back. > Windoze grabs the swap file whenever it wants if you don't have these > installed, makes GPL stutter every time. Try it....Overclocking your V3 to 166 or so will help it and should
be safe with no added cooling.
In article <9597se$58sg$[email hidden]>,
"Mario Petrinovic" <[email hidden]> wrote:
Sent via Deja.com
http://www.deja.com/
Quoted text (15 lines)
> Please help. > > Configuration: > > AMD 900 > 128 mb PC-100 > Voodoo 3 2000 > SB live value > MB Asus A7V > > GPL 1,2,0,1 > Frame rate fine ( >30) but choppy. > In resolutions less than 1280x1024 everything is OK. > >Also, diabling vsync yields a slight fps improvement in GPL.
In article <959n0f$qs6$[email hidden]>,
[email hidden] wrote:
Sent via Deja.com
http://www.deja.com/
Quoted text (24 lines)
> Overclocking your V3 to 166 or so will help it and should > be safe with no added cooling. > > In article <9597se$58sg$[email hidden]>, > "Mario Petrinovic" <[email hidden]> wrote: > > Please help. > > > > Configuration: > > > > AMD 900 > > 128 mb PC-100 > > Voodoo 3 2000 > > SB live value > > MB Asus A7V > > > > GPL 1,2,0,1 > > Frame rate fine ( >30) but choppy. > > In resolutions less than 1280x1024 everything is OK. > > > > > > Sent via Deja.com > http://www.deja.com/ >yes this is true- i run in 1024x768 on a p2 400 with a v32000 pci oc'ed to
166 for a year now with no cooling.
<[email hidden]> wrote in message news:959n0f$qs6$[email hidden]...
Quoted text (24 lines)
> Overclocking your V3 to 166 or so will help it and should > be safe with no added cooling. > > In article <9597se$58sg$[email hidden]>, > "Mario Petrinovic" <[email hidden]> wrote: > > Please help. > > > > Configuration: > > > > AMD 900 > > 128 mb PC-100 > > Voodoo 3 2000 > > SB live value > > MB Asus A7V > > > > GPL 1,2,0,1 > > Frame rate fine ( >30) but choppy. > > In resolutions less than 1280x1024 everything is OK. > > > > > > > Sent via Deja.com > http://www.deja.com/Is this during race with other cars? I have a similar problem but only
during testing, so I don't worry about it too much.
Although my system differs greatly from yours, I do have an AGP V3 3000.
Mario Petrinovic <[email hidden]> wrote in message
news:9597se$58sg$[email hidden]...
Quoted text (17 lines)
> Please help. > > Configuration: > > AMD 900 > 128 mb PC-100 > Voodoo 3 2000 > SB live value > MB Asus A7V > > GPL 1,2,0,1 > Frame rate fine ( >30) but choppy. > In resolutions less than 1280x1024 everything is OK. > > > >I run a k7-700 + v3-3000@172 + mx300 at 1280x1024 and it stays at 36 with
the standard tracks (addon tracks are of course another matter, as are full
fields).
I'm very surprised noone has mentioned GSmiley's Glide Wrapper
http://home.swbell.net/gmsmiley/ whose mirror update=2 ini option gives the
single biggest framerate boost I've seen. Put the sound slider at 8, the
detail slider about half-way, turn off dust and skid marks, and the mirrors
at cars or cars+tracks. Also be sure to turn off Glide VSync in display
properties and have a clean installation of the latest 1.07 v3 drivers.
You don't mention what wheel you use, some of the FF ones cause slowdowns.
rms
[email hidden]
I'm using LWFF. I turned off VSync.
I belive my V3 2000 is the problem because it is inferior to 3000.
Can anybody with V3 2000 achieve resolution 1280x1024.
"Roger Squires" <[email hidden]> wrote in message
news:kZZd6.4261$[email hidden]...
: I run a k7-700 + v3-3000@172 + mx300 at 1280x1024 and it stays at 36 with
: the standard tracks (addon tracks are of course another matter, as are
full
: fields).
:
: I'm very surprised noone has mentioned GSmiley's Glide Wrapper
: http://home.swbell.net/gmsmiley/ whose mirror update=2 ini option gives
the
: single biggest framerate boost I've seen. Put the sound slider at 8, the
: detail slider about half-way, turn off dust and skid marks, and the
mirrors
: at cars or cars+tracks. Also be sure to turn off Glide VSync in display
: properties and have a clean installation of the latest 1.07 v3 drivers.
:
: You don't mention what wheel you use, some of the FF ones cause slowdowns.
:
: rms
: [email hidden]
:
:
:
> I belive my V3 2000 is the problem because it is inferior to 3000.
The cards are identical but for the clockspeed and the game bundle as far
as I know. There is a builtin overclocking page in the drivers, but it has
to be enabled in the registry, a hassle. Just get this utility
http://www.tweakfiles.com/cgi-bin/dl-ftp.cgi?ftp.zdnet.com/threedee/tweakfil
es/video/v3oc3200.zip
It works perfectly with no bugs and has nice features. But again, install
the glide wrapper, a 10% clock boost won't make any difference.
rms
[email hidden]
Your V32k is the bottleneck. It will display 1280, but it won't be very
happy
doing it. Best to either scale back to 1024x780 or start thinking about a
vidcard upgrade.
dave henrie
"Mario Petrinovic" <[email hidden]> wrote in message
news:959u9l$64rn$[email hidden]...
with
the
> : detail slider about half-way, turn off dust and skid marks, and the
> mirrors
> : at cars or cars+tracks. Also be sure to turn off Glide VSync in display
> : properties and have a clean installation of the latest 1.07 v3 drivers.
> :
> : You don't mention what wheel you use, some of the FF ones causeslowdowns.
Quoted text (7 lines)
> I'm using LWFF. I turned off VSync. > I belive my V3 2000 is the problem because it is inferior to 3000. > Can anybody with V3 2000 achieve resolution 1280x1024. > > "Roger Squires" <[email hidden]> wrote in message > news:kZZd6.4261$[email hidden]... > : I run a k7-700 + v3-3000@172 + mx300 at 1280x1024 and it stays at 36Quoted text (8 lines)
> : the standard tracks (addon tracks are of course another matter, as are > full > : fields). > : > : I'm very surprised noone has mentioned GSmiley's Glide Wrapper > : http://home.swbell.net/gmsmiley/ whose mirror update=2 ini option gives > the > : single biggest framerate boost I've seen. Put the sound slider at 8,Quoted text (8 lines)
> : > : rms > : [email hidden] > : > : > : > >As soon as I find out if GeForce MX (or maybe GeForce 256 )
will be enough for N4.
"Dave Henrie" <[email hidden]> wrote in message
news:wB1e6.348804$[email hidden]...
: Your V32k is the bottleneck. It will display 1280, but it won't be very
: happy
: doing it. Best to either scale back to 1024x780 or start thinking about a
: vidcard upgrade.
: dave henrie
Oh definitely - MX here and it works great at decent resolutions!
Ash
"Mario Petrinovic" <[email hidden]> wrote in message
news:95c45a$a84d$[email hidden]...
a
| : vidcard upgrade.
| : dave henrie
|
|
|
Quoted text (8 lines)
| As soon as I find out if GeForce MX (or maybe GeForce 256 ) | will be enough for N4. | | "Dave Henrie" <[email hidden]> wrote in message | news:wB1e6.348804$[email hidden]... | : Your V32k is the bottleneck. It will display 1280, but it won't be very | : happy | : doing it. Best to either scale back to 1024x780 or start thinking aboutLast night I overclocked my V3 2000 to 165 Mhz.
That boosted frame rate to almost solid 36 and helped a lot with
chopping but not enough. It is still present. So back to
1024x768. It's unfortunate cos in 12x10 looks almost like real thing.
Thx all for trying to help. I'm shure your remarks will help somebody
else.
For reference, my system:
AMD 900
V 3 2000
SB live value
LWFF
Asus A7V
> "Roger Squires" <[email hidden]> wrote in message: > news:kZZd6.4261$[email hidden]...
: > : I run a k7-700 + v3-3000@172 + mx300 at 1280x1024 and it stays at 36
: with
: > : the standard tracks (addon tracks are of course another matter, as are
: > full
: > : fields).
: > :
: > : I'm very surprised noone has mentioned GSmiley's Glide Wrapper
: > : http://home.swbell.net/gmsmiley/ whose mirror update=2 ini option
gives
: > the
: > : single biggest framerate boost I've seen. Put the sound slider at 8,
: the
: > : detail slider about half-way, turn off dust and skid marks, and the
: > mirrors
: > : at cars or cars+tracks. Also be sure to turn off Glide VSync in
display
: > : properties and have a clean installation of the latest 1.07 v3
drivers.
: > :
: > : You don't mention what wheel you use, some of the FF ones cause
: slowdowns.
: > :
: > : rms
: > : [email hidden]
Less during testing more during race.
Problem is in my AGP V3 2000, because when I overclock
it there is less chooping. It is probably not because of
processor speed, but I think it is card memory, which I think is
better in V3 3000.
"bernie eccle" <[email hidden]> wrote in message
news:95evge$m68$[email hidden]...
: Is this during race with other cars? I have a similar problem but only
: during testing, so I don't worry about it too much.
:
: Although my system differs greatly from yours, I do have an AGP V3 3000.
The 2000 and 3000 have the same amount of memory, 16mb.
In article <95ffg6$fhue$[email hidden]>,
"Mario Petrinovic" <[email hidden]> wrote:
only
> : during testing, so I don't worry about it too much.
> :
> : Although my system differs greatly from yours, I do have an AGP V33000.
>
>
Sent via Deja.com
http://www.deja.com/
Quoted text (9 lines)
> Less during testing more during race. > Problem is in my AGP V3 2000, because when I overclock > it there is less chooping. It is probably not because of > processor speed, but I think it is card memory, which I think is > better in V3 3000. > > "bernie eccle" <[email hidden]> wrote in message > news:95evge$m68$[email hidden]... > : Is this during race with other cars? I have a similar problem butIf I remember corectly 3000 memory is of better quality.
I think 2000 memory cannot stand higher Mhz like 3000.
<[email hidden]> wrote in message news:95ggj2$mm8$[email hidden]...
: The 2000 and 3000 have the same amount of memory, 16mb.
:
:
: In article <95ffg6$fhue$[email hidden]>,
: "Mario Petrinovic" <[email hidden]> wrote:
: > Less during testing more during race.
: > Problem is in my AGP V3 2000, because when I overclock
: > it there is less chooping. It is probably not because of
: > processor speed, but I think it is card memory, which I think is
: > better in V3 3000.
: >
: > "bernie eccle" <[email hidden]> wrote in message
: > news:95evge$m68$[email hidden]...
: > : Is this during race with other cars? I have a similar problem but
: only
: > : during testing, so I don't worry about it too much.
: > :
: > : Although my system differs greatly from yours, I do have an AGP V3
: 3000.
: >
: >
:
:
: Sent via Deja.com
: http://www.deja.com/
In article <95e2pl$d5t5$[email hidden]>, [email hidden]
says...
Well, test 1152x864 then.
--
Johan N
[email hidden]
Quoted text (15 lines)
>> Last night I overclocked my V3 2000 to 165 Mhz. >> That boosted frame rate to almost solid 36 and helped a lot with >> chopping but not enough. It is still present. So back to >> 1024x768. It's unfortunate cos in 12x10 looks almost like real thing. >> Thx all for trying to help. I'm shure your remarks will help somebody >> else. >> >> For reference, my system: >> AMD 900 >> V 3 2000 >> SB live value >> LWFF >> Asus A7V >> >>Hello [email hidden]! Sat, 03 Feb 2001 08:47:31 GMT you wrote:
>The 2000 and 3000 have the same amount of memory, 16mb.
Memory on V3 2000 is rated to 143MHz, but V3 3000 has 166Mhz memory
so there is big difference.
--
Tuomas Paasiala | Multitasking in Windows? | Save bandwidth, no
| - Use UAE | longer signatures
Helsinki FINLAND | Remove _NO-SPAM_ for reply | than four lines ! -95
I don't see that resolution in options menu.
We're talking here about GPL and dfx.
"Johan N" <[email hidden]> wrote in message
: Well, test 1152x864 then.
: --
: Johan N
:
: [email hidden]
In those days (two years ago ) it was dificult to achieve that speed.
Even today you only have PC-133. So 143 was of cheaper brand
and slower.165 was some quality brand, and faster regarding some
other caracteristics ( I'm not expert, but I think it had faster access
time or something like that).
"Tuomas Paasiala" <[email hidden]> wrote in message
news:[email hidden]...
: Hello [email hidden]! Sat, 03 Feb 2001 08:47:31 GMT you wrote:
:
: >The 2000 and 3000 have the same amount of memory, 16mb.
:
: Memory on V3 2000 is rated to 143MHz, but V3 3000 has 166Mhz memory
: so there is big difference.
:
: --
: Tuomas Paasiala | Multitasking in Windows? | Save bandwidth, no
: | - Use UAE | longer signatures
: Helsinki FINLAND | Remove _NO-SPAM_ for reply | than four lines ! -95


































