Ok, So I run out to the store today and grab Nascar 4. Install the game, no
problem. I'm able to configure my wheel inside the game using the optimized
driver, which I always use in Papryus games because I think it works better
with my ECCI wheel. Everything is ok. Then the fun begins.
I exit Nascar 4 and just for the heck of it, I fire up Nascar Heat. Suprise,
my ECCI wheel no longer is working. I can steer fine, but my gas and break
pedals are broke.
I leave Nascar Heat, go the Gaming Options control panel. Which I notice has
been renamed in DirectX 8. Up until now, I have been configuring my ECCI
wheel using the "Thrustmaster Formula 1/T2 without Adapter" controller
listing. Up until now, that has always worked just fine. Now, I cannot
configure the pedals. Both pedals are completely dead in the calibration
mode...
Does anyone have any ideas what to do????
Use the 3-axis/4-button option and recalibrate, this is how I have all of my
ECCI systems configured.
[email hidden]
Jeffrey Lipack wrote in message ...
>Ok, So I run out to the store today and grab Nascar 4. Install the game, no
>problem. I'm able to configure my wheel inside the game using the optimized
>driver, which I always use in Papryus games because I think it works better
>with my ECCI wheel. Everything is ok. Then the fun begins.
>
>I exit Nascar 4 and just for the heck of it, I fire up Nascar Heat.Suprise,
>my ECCI wheel no longer is working. I can steer fine, but my gas and break
>pedals are broke.
>
>I leave Nascar Heat, go the Gaming Options control panel. Which I noticehas
Quoted text (11 lines)
>been renamed in DirectX 8. Up until now, I have been configuring my ECCI >wheel using the "Thrustmaster Formula 1/T2 without Adapter" controller >listing. Up until now, that has always worked just fine. Now, I cannot >configure the pedals. Both pedals are completely dead in the calibration >mode... > >Does anyone have any ideas what to do???? > > > >On Wed, 07 Feb 2001 23:46:15 GMT, "Jeffrey Lipack"
<[email hidden]> wrote:
Try the recommended ECCI setting of 2 axis 4 button joystick.
Quoted text (20 lines)
>Ok, So I run out to the store today and grab Nascar 4. Install the game, no >problem. I'm able to configure my wheel inside the game using the optimized >driver, which I always use in Papryus games because I think it works better >with my ECCI wheel. Everything is ok. Then the fun begins. > >I exit Nascar 4 and just for the heck of it, I fire up Nascar Heat. Suprise, >my ECCI wheel no longer is working. I can steer fine, but my gas and break >pedals are broke. > >I leave Nascar Heat, go the Gaming Options control panel. Which I notice has >been renamed in DirectX 8. Up until now, I have been configuring my ECCI >wheel using the "Thrustmaster Formula 1/T2 without Adapter" controller >listing. Up until now, that has always worked just fine. Now, I cannot >configure the pedals. Both pedals are completely dead in the calibration >mode... > >Does anyone have any ideas what to do???? > > >I've tried both the 2 axis/4 button and the 3 axis/4 button options. Neither
work. I also did check the ECCI website where they have page on calibration
issues...
It has to be related to DirectX 8. My wheel has been working perfectly up
until I installed Nascar 4 and DirectX 8. I should also point that my wheel
is still working perfectly using the Papyrus optimized driver. It's only
when I use the DirectX drive does it not function.
Buford <[email hidden]> wrote in message
news:[email hidden]...
> On Wed, 07 Feb 2001 23:46:15 GMT, "Jeffrey Lipack"
> <[email hidden]> wrote:
>
> >Ok, So I run out to the store today and grab Nascar 4. Install the game,no
> >problem. I'm able to configure my wheel inside the game using theoptimized
> >driver, which I always use in Papryus games because I think it worksbetter
> >with my ECCI wheel. Everything is ok. Then the fun begins.
> >
> >I exit Nascar 4 and just for the heck of it, I fire up Nascar Heat.Suprise,
> >my ECCI wheel no longer is working. I can steer fine, but my gas andbreak
> >pedals are broke.
> >
> >I leave Nascar Heat, go the Gaming Options control panel. Which I noticehas
Quoted text (14 lines)
> >been renamed in DirectX 8. Up until now, I have been configuring my ECCI > >wheel using the "Thrustmaster Formula 1/T2 without Adapter" controller > >listing. Up until now, that has always worked just fine. Now, I cannot > >configure the pedals. Both pedals are completely dead in the calibration > >mode... > > > >Does anyone have any ideas what to do???? > > > > > > > > > > Try the recommended ECCI setting of 2 axis 4 button joystick.Tried DirectX 8A?
Jeffrey Lipack <[email hidden]> wrote in message
news:KXlg6.44959$[email hidden]...
> I've tried both the 2 axis/4 button and the 3 axis/4 button options.Neither
> work. I also did check the ECCI website where they have page oncalibration
> issues...
>
> It has to be related to DirectX 8. My wheel has been working perfectly up
> until I installed Nascar 4 and DirectX 8. I should also point that mywheel
> is still working perfectly using the Papyrus optimized driver. It's only
> when I use the DirectX drive does it not function.
Yep, just tried that as well. No change....
Stephen Smith <[email hidden]> wrote in message
news:FGmg6.89506$[email hidden]...
up
Quoted text (11 lines)
> Tried DirectX 8A? > > Jeffrey Lipack <[email hidden]> wrote in message > news:KXlg6.44959$[email hidden]... > > I've tried both the 2 axis/4 button and the 3 axis/4 button options. > Neither > > work. I also did check the ECCI website where they have page on > calibration > > issues... > > > > It has to be related to DirectX 8. My wheel has been working perfectlyQuoted text (7 lines)
> > until I installed Nascar 4 and DirectX 8. I should also point that my > wheel > > is still working perfectly using the Papyrus optimized driver. It's only > > when I use the DirectX drive does it not function. > > >>
> Does anyone have any ideas what to do????
>
Seeing as the other suggestions have failed you could try doing what I did
when my pedals stop working (T2 on a sblive value) when I installed DX8.
The problem was with msanalog.vxd. Get a copy of it from DX7 (DX7AENG.EXE)
and overwrite the version DX8 has put in your \windows\system directory.
Just a shot but try installing Direct X 8a and see if that helps. Also, what
OS are you using. I had the same peoblem and after I booted in safe mode and
took all game and sound related entries out of my system control panel I
reinstalled widows over it and everything worked fine.
--
Mike Grandy
Precision Racing
www.precision-racing.com
"Jeffrey Lipack" <[email hidden]> wrote in message
news:KXlg6.44959$[email hidden]...
> I've tried both the 2 axis/4 button and the 3 axis/4 button options.
Neither
> work. I also did check the ECCI website where they have page on
calibration
> issues...
>
> It has to be related to DirectX 8. My wheel has been working perfectly up
> until I installed Nascar 4 and DirectX 8. I should also point that my
wheel
> is still working perfectly using the Papyrus optimized driver. It's only
> when I use the DirectX drive does it not function.
>
>
> Buford <[email hidden]> wrote in message
> news:[email hidden]...
> > On Wed, 07 Feb 2001 23:46:15 GMT, "Jeffrey Lipack"
> > <[email hidden]> wrote:
> >
> > >Ok, So I run out to the store today and grab Nascar 4. Install the
game,
> no
> > >problem. I'm able to configure my wheel inside the game using the
> optimized
> > >driver, which I always use in Papryus games because I think it works
> better
> > >with my ECCI wheel. Everything is ok. Then the fun begins.
> > >
> > >I exit Nascar 4 and just for the heck of it, I fire up Nascar Heat.
> Suprise,
> > >my ECCI wheel no longer is working. I can steer fine, but my gas and
> break
> > >pedals are broke.
> > >
> > >I leave Nascar Heat, go the Gaming Options control panel. Which I
notice
> has
> > >been renamed in DirectX 8. Up until now, I have been configuring my
ECCI
> > >wheel using the "Thrustmaster Formula 1/T2 without Adapter" controller
> > >listing. Up until now, that has always worked just fine. Now, I cannot
> > >configure the pedals. Both pedals are completely dead in the
calibration
> > >mode...
> > >
> > >Does anyone have any ideas what to do????
> > >
> > >
> > >
> >
> >
> >
> > Try the recommended ECCI setting of 2 axis 4 button joystick.
>
>
I had some trouble with my wheel a while ago. I had to install it as a 4axis
4button
steering is x, Y is not used and the pedals are the other axis. This is the
only way it works for me.
--
Kevin Anderson
[email hidden]
"Jeffrey Lipack" <[email hidden]> wrote in message
news:b7lg6.31216$[email hidden]...
> Ok, So I run out to the store today and grab Nascar 4. Install the game,
no
> problem. I'm able to configure my wheel inside the game using the
optimized
> driver, which I always use in Papryus games because I think it works
better
> with my ECCI wheel. Everything is ok. Then the fun begins.
>
> I exit Nascar 4 and just for the heck of it, I fire up Nascar Heat.
Suprise,
> my ECCI wheel no longer is working. I can steer fine, but my gas and break
> pedals are broke.
>
> I leave Nascar Heat, go the Gaming Options control panel. Which I notice
has
> been renamed in DirectX 8. Up until now, I have been configuring my ECCI
> wheel using the "Thrustmaster Formula 1/T2 without Adapter" controller
> listing. Up until now, that has always worked just fine. Now, I cannot
> configure the pedals. Both pedals are completely dead in the calibration
> mode...
>
> Does anyone have any ideas what to do????
>
>
>
>


































