Race Sim Central
Rec.Autos.Simulators Archive

N4 - GeForce II D3D vs OpenGL Question...

15 posts by 7 people · 24 Feb 2001 03:54 UTC - 26 Feb 2001 09:05 UTC

Glen 24 Feb 2001 03:54 UTC#200576
I have a PIII 650 (oc'ed to 806) and a GeForce GTS card (using 6.5? drivers). I have heard people say that OPENGL mode is preferable and that it automatically will take advantage of TnL. I find that when I select D3D w/TnL that my frame rate is MUCH higher (12 - 17 fps higher on average!) than when I use OPENGL (all graphics options being equal - including turning AA off when running in OPENGL). So you'd think that D3D is the obvious option for me to run in....however, anti-aliasing does not work in this mode. I know that AA with D3D was an early problem with GeForce cards. Is this still the case? Or is there something I am missing? I have AA 'forced' in my display control. If AA is not going to be possible for D3D, is there something I can do to ensure that OPEN GL mode is taking advantage of the TnL? Any help appreciated. Glen
That's unusual, most folks get better frame rates in Open GL. You running in 16 bit color? For example, my frame rates in Open Gl are in the 50's, in D3d w/TnL Hal they are in the 30's. -- Don Burnette D Burnette in N4 Some people do nothing wrong. The problem is, they do nothing. And THAT is wrong. "Glen" <[email hidden]> wrote in message news:hgGl6.539$[email hidden]... > I have a PIII 650 (oc'ed to 806) and a GeForce GTS card (using 6.5? > drivers). I have heard people say that OPENGL mode is preferable and that > it automatically will take advantage of TnL. I find that when I select D3D > w/TnL that my frame rate is MUCH higher (12 - 17 fps higher on average!) > than when I use OPENGL (all graphics options being equal - including turning > AA off when running in OPENGL). > > So you'd think that D3D is the obvious option for me to run in....however, > anti-aliasing does not work in this mode. I know that AA with D3D was an > early problem with GeForce cards. Is this still the case? Or is there > something I am missing? I have AA 'forced' in my display control. > > If AA is not going to be possible for D3D, is there something I can do to > ensure that OPEN GL mode is taking advantage of the TnL? > > Any help appreciated. > > Glen > > >
Yeah, running in 16bit color. When I saw how much better my D3D w/TnL was, I started wondering if there was some setting I need to turn on for OPENGL to take advantage of TnL, but the consensus seems to be that OPEN GL will, by default, use TnL. Any idea about the aliasing issue with D3D? Is it possible to use AA w/D3d in Nascar 4? Glen btw...my frame rate figures are exactly opposite of yours (running in 1024x768), OPENGL = 30's D3D w TnL = 50's Don Burnette wrote in message <_lGl6.318416$[email hidden]>... >That's unusual, most folks get better frame rates in Open GL. You runningin
Quoted text (16 lines)>16 bit color? >For example, my frame rates in Open Gl are in the 50's, in D3d w/TnL Hal >they are in the 30's. > >-- >Don Burnette >D Burnette in N4 > >Some people do nothing wrong. >The problem is, they do nothing. >And THAT is wrong. > >"Glen" <[email hidden]> wrote in message >news:hgGl6.539$[email hidden]... >> I have a PIII 650 (oc'ed to 806) and a GeForce GTS card (using 6.5? >> drivers). I have heard people say that OPENGL mode is preferable and
that
Quoted text (8 lines)>> it automatically will take advantage of TnL. I find that when I select >D3D >> w/TnL that my frame rate is MUCH higher (12 - 17 fps higher on average!) >> than when I use OPENGL (all graphics options being equal - including >turning >> AA off when running in OPENGL). >> >> So you'd think that D3D is the obvious option for me to run
in....however,
Quoted text (15 lines)>> anti-aliasing does not work in this mode. I know that AA with D3D was an >> early problem with GeForce cards. Is this still the case? Or is there >> something I am missing? I have AA 'forced' in my display control. >> >> If AA is not going to be possible for D3D, is there something I can do to >> ensure that OPEN GL mode is taking advantage of the TnL? >> >> Any help appreciated. >> >> Glen >> >> >> > >
I'm see simular results... but my frame rate drops to below 10 on major wrecks, especially on small tracks. Also you get some additional special effects under the OpenGL setting. While on it... I'm sure someone has mention this already... The graphics seems to be cleaner or non blurrie compared to the D3D drivers. I had a bear of a time to get the D3D to work... my problem was that I was running DUAL MONITORS. I had to disable monitor 2 while playing the game ;) "Don Burnette" <[email hidden]> wrote in message news:_lGl6.318416$[email hidden]... > That's unusual, most folks get better frame rates in Open GL. You runningin
Quoted text (16 lines)> 16 bit color? > For example, my frame rates in Open Gl are in the 50's, in D3d w/TnL Hal > they are in the 30's. > > -- > Don Burnette > D Burnette in N4 > > Some people do nothing wrong. > The problem is, they do nothing. > And THAT is wrong. > > "Glen" <[email hidden]> wrote in message > news:hgGl6.539$[email hidden]... > > I have a PIII 650 (oc'ed to 806) and a GeForce GTS card (using 6.5? > > drivers). I have heard people say that OPENGL mode is preferable and
that
Quoted text (8 lines)> > it automatically will take advantage of TnL. I find that when I select > D3D > > w/TnL that my frame rate is MUCH higher (12 - 17 fps higher on average!) > > than when I use OPENGL (all graphics options being equal - including > turning > > AA off when running in OPENGL). > > > > So you'd think that D3D is the obvious option for me to run
in....however, > > anti-aliasing does not work in this mode. I know that AA with D3D wasan > > early problem with GeForce cards. Is this still the case? Or is there > > something I am missing? I have AA 'forced' in my display control. > > > > If AA is not going to be possible for D3D, is there something I can doto
Quoted text (10 lines)> > ensure that OPEN GL mode is taking advantage of the TnL? > > > > Any help appreciated. > > > > Glen > > > > > > > >
Open GL does indeed automatically take advantage of the hardware TnL. My Open GL settings are as follows: Use desktop color depth ( mine is 16 bit) Buffer flipping mode: Auto Select Vertical Synch: Always Off FSAA: No antialiasing In the performance and capability options: Enable buffer region extension: Checked Allow dual planes extension to use local video memory: Checked Use fast linear-mipmaplinear-filtering : Checked All the rest unchecked. I also run in 1024x768. No idea about about the aliasing issue with D3d, I have tried it on all settings, don't really see a difference on the screen or in framerates. -- Don Burnette D Burnette in N4 Some people do nothing wrong. The problem is, they do nothing. And THAT is wrong. "Glen" <[email hidden]> wrote in message news:pCGl6.544$[email hidden]... > Yeah, running in 16bit color. When I saw how much better my D3D w/TnL was, > I started wondering if there was some setting I need to turn on for OPENGL > to take advantage of TnL, but the consensus seems to be that OPEN GL will, > by default, use TnL. > > Any idea about the aliasing issue with D3D? Is it possible to use AA w/D3d > in Nascar 4? > > Glen > > btw...my frame rate figures are exactly opposite of yours (running in > 1024x768), OPENGL = 30's D3D w TnL = 50's > > Don Burnette wrote in message > <_lGl6.318416$[email hidden]>... > >That's unusual, most folks get better frame rates in Open GL. You running > in > >16 bit color? > >For example, my frame rates in Open Gl are in the 50's, in D3d w/TnL Hal > >they are in the 30's. > > > >-- > >Don Burnette > >D Burnette in N4 > > > >Some people do nothing wrong. > >The problem is, they do nothing. > >And THAT is wrong. > > > >"Glen" <[email hidden]> wrote in message > >news:hgGl6.539$[email hidden]... > >> I have a PIII 650 (oc'ed to 806) and a GeForce GTS card (using 6.5? > >> drivers). I have heard people say that OPENGL mode is preferable and > that > >> it automatically will take advantage of TnL. I find that when I select > >D3D > >> w/TnL that my frame rate is MUCH higher (12 - 17 fps higher on average!) > >> than when I use OPENGL (all graphics options being equal - including > >turning > >> AA off when running in OPENGL). > >> > >> So you'd think that D3D is the obvious option for me to run > in....however, > >> anti-aliasing does not work in this mode. I know that AA with D3D was an > >> early problem with GeForce cards. Is this still the case? Or is there > >> something I am missing? I have AA 'forced' in my display control. > >> > >> If AA is not going to be possible for D3D, is there something I can do to > >> ensure that OPEN GL mode is taking advantage of the TnL? > >> > >> Any help appreciated. > >> > >> Glen > >> > >> > >> > > > > > >
Yeah, now in major wrecks, with mulitple cars involved, my framerate will drop way down as well. -- Don Burnette D Burnette in N4 Some people do nothing wrong. The problem is, they do nothing. And THAT is wrong. "Double T" <[email hidden]> wrote in message news:6GGl6.318480$[email hidden]... > I'm see simular results... but my frame rate drops to below 10 on major > wrecks, especially on small tracks. Also you get some additional special > effects under the OpenGL setting. While on it... I'm sure someone has > mention this already... The graphics seems to be cleaner or non blurrie > compared to the D3D drivers. I had a bear of a time to get the D3D to > work... my problem was that I was running DUAL MONITORS. I had to disable > monitor 2 while playing the game ;) > > > "Don Burnette" <[email hidden]> wrote in message > news:_lGl6.318416$[email hidden]... > > That's unusual, most folks get better frame rates in Open GL. You running > in > > 16 bit color? > > For example, my frame rates in Open Gl are in the 50's, in D3d w/TnL Hal > > they are in the 30's. > > > > -- > > Don Burnette > > D Burnette in N4 > > > > Some people do nothing wrong. > > The problem is, they do nothing. > > And THAT is wrong. > > > > "Glen" <[email hidden]> wrote in message > > news:hgGl6.539$[email hidden]... > > > I have a PIII 650 (oc'ed to 806) and a GeForce GTS card (using 6.5? > > > drivers). I have heard people say that OPENGL mode is preferable and > that > > > it automatically will take advantage of TnL. I find that when I select > > D3D > > > w/TnL that my frame rate is MUCH higher (12 - 17 fps higher on average!) > > > than when I use OPENGL (all graphics options being equal - including > > turning > > > AA off when running in OPENGL). > > > > > > So you'd think that D3D is the obvious option for me to run > in....however, > > > anti-aliasing does not work in this mode. I know that AA with D3D was > an > > > early problem with GeForce cards. Is this still the case? Or is there > > > something I am missing? I have AA 'forced' in my display control. > > > > > > If AA is not going to be possible for D3D, is there something I can do > to > > > ensure that OPEN GL mode is taking advantage of the TnL? > > > > > > Any help appreciated. > > > > > > Glen > > > > > > > > > > > > > > >
Maybe all these guys had selected the non-TnL D3D renderer? That's just a wild guess though. I don't have N4 yet to test, but with the demo, I also found D3D to be faster. The GF2 should be faster in OpenGL. As for AA, try some of the other modes maybe? "Glen" <[email hidden]> wrote in message news:hgGl6.539$[email hidden]... > I have a PIII 650 (oc'ed to 806) and a GeForce GTS card (using 6.5? > drivers). I have heard people say that OPENGL mode is preferable and that > it automatically will take advantage of TnL. I find that when I selectD3D > w/TnL that my frame rate is MUCH higher (12 - 17 fps higher on average!) > than when I use OPENGL (all graphics options being equal - includingturning
Quoted text (16 lines)> AA off when running in OPENGL). > > So you'd think that D3D is the obvious option for me to run in....however, > anti-aliasing does not work in this mode. I know that AA with D3D was an > early problem with GeForce cards. Is this still the case? Or is there > something I am missing? I have AA 'forced' in my display control. > > If AA is not going to be possible for D3D, is there something I can do to > ensure that OPEN GL mode is taking advantage of the TnL? > > Any help appreciated. > > Glen > > >
Don this was great help for me!! Would you know the settings to put into the Driect3D section too as you did for OpenGL?? Tia.. Thom_j. "Don Burnette" <[email hidden]> wrote in message news:GKGl6.318490$[email hidden]...
Quoted text (32 lines)| Open GL does indeed automatically take advantage of the hardware TnL. | My Open GL settings are as follows: | | Use desktop color depth ( mine is 16 bit) | Buffer flipping mode: Auto Select | Vertical Synch: Always Off | FSAA: No antialiasing | | In the performance and capability options: | | Enable buffer region extension: Checked | Allow dual planes extension to use local video memory: Checked | Use fast linear-mipmaplinear-filtering : Checked | All the rest unchecked. | | I also run in 1024x768. | | No idea about about the aliasing issue with D3d, I have tried it on all | settings, don't really see a difference on the screen or in framerates. | -- | Don Burnette | D Burnette in N4 | | Some people do nothing wrong. | The problem is, they do nothing. | And THAT is wrong. | | "Glen" <[email hidden]> wrote in message | news:pCGl6.544$[email hidden]... | > Yeah, running in 16bit color. When I saw how much better my D3D w/TnL | was, | > I started wondering if there was some setting I need to turn on for
OPENGL | > to take advantage of TnL, but the consensus seems to be that OPEN GLwill,
Quoted text (14 lines)| > by default, use TnL. | > | > Any idea about the aliasing issue with D3D? Is it possible to use AA | w/D3d | > in Nascar 4? | > | > Glen | > | > btw...my frame rate figures are exactly opposite of yours (running in | > 1024x768), OPENGL = 30's D3D w TnL = 50's | > | > Don Burnette wrote in message | > <_lGl6.318416$[email hidden]>... | > >That's unusual, most folks get better frame rates in Open GL. You
running | > in | > >16 bit color? | > >For example, my frame rates in Open Gl are in the 50's, in D3d w/TnLHal
Quoted text (16 lines)| > >they are in the 30's. | > > | > >-- | > >Don Burnette | > >D Burnette in N4 | > > | > >Some people do nothing wrong. | > >The problem is, they do nothing. | > >And THAT is wrong. | > > | > >"Glen" <[email hidden]> wrote in message | > >news:hgGl6.539$[email hidden]... | > >> I have a PIII 650 (oc'ed to 806) and a GeForce GTS card (using 6.5? | > >> drivers). I have heard people say that OPENGL mode is preferable and | > that | > >> it automatically will take advantage of TnL. I find that when I
select
Quoted text (10 lines)| > >D3D | > >> w/TnL that my frame rate is MUCH higher (12 - 17 fps higher on | average!) | > >> than when I use OPENGL (all graphics options being equal - including | > >turning | > >> AA off when running in OPENGL). | > >> | > >> So you'd think that D3D is the obvious option for me to run | > in....however, | > >> anti-aliasing does not work in this mode. I know that AA with D3D
was | an | > >> early problem with GeForce cards. Is this still the case? Or isthere | > >> something I am missing? I have AA 'forced' in my display control. | > >> | > >> If AA is not going to be possible for D3D, is there something I cando
Quoted text (15 lines)| to | > >> ensure that OPEN GL mode is taking advantage of the TnL? | > >> | > >> Any help appreciated. | > >> | > >> Glen | > >> | > >> | > >> | > > | > > | > | > | |
Don I followed you instruction below for OpenGL. Here is what I found in "Daytona night".... Alone in testing turns 1&3 = 90-94fps 2&3= 70-75fps. I guess the lower fps in 2&3 as the stands came into view? In a 21car race at the back of the pack at start 30-35fps after moving into the start flag up to 45-49fps & finally racing several laps consistantly in the 50fps depending on how many cars around me. Car draw 8 front 4 back! I will test the same with D3d later as this is what I was using but it seems OpenGL is the better of the 2?...Thanx Again.. Thom_j. PC Specs: Pent III 800mhz CPU, Abit SA6R mo'board, 256megs of PC133Dram, Asus V7700 64mb GeForce2 Pro video card, Twin Voodoo2 cards in SLI, Three-30gig Hardrives, ViewSonic PS790 20" Monitor, Quillemot FF Ferrari Race Wheel and Quillemot FF Joystick.. "Don Burnette" <[email hidden]> wrote in message news:GKGl6.318490$[email hidden]...
Quoted text (32 lines)| Open GL does indeed automatically take advantage of the hardware TnL. | My Open GL settings are as follows: | | Use desktop color depth ( mine is 16 bit) | Buffer flipping mode: Auto Select | Vertical Synch: Always Off | FSAA: No antialiasing | | In the performance and capability options: | | Enable buffer region extension: Checked | Allow dual planes extension to use local video memory: Checked | Use fast linear-mipmaplinear-filtering : Checked | All the rest unchecked. | | I also run in 1024x768. | | No idea about about the aliasing issue with D3d, I have tried it on all | settings, don't really see a difference on the screen or in framerates. | -- | Don Burnette | D Burnette in N4 | | Some people do nothing wrong. | The problem is, they do nothing. | And THAT is wrong. | | "Glen" <[email hidden]> wrote in message | news:pCGl6.544$[email hidden]... | > Yeah, running in 16bit color. When I saw how much better my D3D w/TnL | was, | > I started wondering if there was some setting I need to turn on for
OPENGL | > to take advantage of TnL, but the consensus seems to be that OPEN GLwill,
Quoted text (14 lines)| > by default, use TnL. | > | > Any idea about the aliasing issue with D3D? Is it possible to use AA | w/D3d | > in Nascar 4? | > | > Glen | > | > btw...my frame rate figures are exactly opposite of yours (running in | > 1024x768), OPENGL = 30's D3D w TnL = 50's | > | > Don Burnette wrote in message | > <_lGl6.318416$[email hidden]>... | > >That's unusual, most folks get better frame rates in Open GL. You
running | > in | > >16 bit color? | > >For example, my frame rates in Open Gl are in the 50's, in D3d w/TnLHal
Quoted text (16 lines)| > >they are in the 30's. | > > | > >-- | > >Don Burnette | > >D Burnette in N4 | > > | > >Some people do nothing wrong. | > >The problem is, they do nothing. | > >And THAT is wrong. | > > | > >"Glen" <[email hidden]> wrote in message | > >news:hgGl6.539$[email hidden]... | > >> I have a PIII 650 (oc'ed to 806) and a GeForce GTS card (using 6.5? | > >> drivers). I have heard people say that OPENGL mode is preferable and | > that | > >> it automatically will take advantage of TnL. I find that when I
select
Quoted text (10 lines)| > >D3D | > >> w/TnL that my frame rate is MUCH higher (12 - 17 fps higher on | average!) | > >> than when I use OPENGL (all graphics options being equal - including | > >turning | > >> AA off when running in OPENGL). | > >> | > >> So you'd think that D3D is the obvious option for me to run | > in....however, | > >> anti-aliasing does not work in this mode. I know that AA with D3D
was | an | > >> early problem with GeForce cards. Is this still the case? Or isthere | > >> something I am missing? I have AA 'forced' in my display control. | > >> | > >> If AA is not going to be possible for D3D, is there something I cando
Quoted text (15 lines)| to | > >> ensure that OPEN GL mode is taking advantage of the TnL? | > >> | > >> Any help appreciated. | > >> | > >> Glen | > >> | > >> | > >> | > > | > > | > | > | |
Identical experience here with 6.50 drivers. No FSAA. Faster and clearer in D3D. However, frame rates still drop to single digits with a full field if there is a big accident. I am actually running at 1600 x 1200 and still see way too many jaggies. OpenGL phases in clarity as you approach an object--just like in GPL. You would expect higher frame rates since it is drawing less detail at a distance, but it doesn't work that way on my system. I hate the look of that in GPL and N4, so I am not worried that D3D is running faster here. FYI, I got an extra 3 - 6 fps when I upgraded from DX 7.0a to 8.0a. Marc. "Glen" <[email hidden]> wrote in message news:hgGl6.539$[email hidden]... > I have a PIII 650 (oc'ed to 806) and a GeForce GTS card (using 6.5? > drivers). I have heard people say that OPENGL mode is preferable and that > it automatically will take advantage of TnL. I find that when I selectD3D > w/TnL that my frame rate is MUCH higher (12 - 17 fps higher on average!) > than when I use OPENGL (all graphics options being equal - includingturning
Quoted text (16 lines)> AA off when running in OPENGL). > > So you'd think that D3D is the obvious option for me to run in....however, > anti-aliasing does not work in this mode. I know that AA with D3D was an > early problem with GeForce cards. Is this still the case? Or is there > something I am missing? I have AA 'forced' in my display control. > > If AA is not going to be possible for D3D, is there something I can do to > ensure that OPEN GL mode is taking advantage of the TnL? > > Any help appreciated. > > Glen > > >
Sure, here is what I have Under D3D: Enable fog table emulations: Checked Adjust Z Buffer depth to rendering depth if unequal: Checked Enable alternate depth buffereing: Unchecked Display logo when running d3d: Unchecked Mipmapping detail level: Blend PCI texture memory size : 15 mb Under More D3D Texel alignment value: 3 Vertical Synch: Always Off Render no more than 0 frames ahead Then under the antialiasing tab: Off Hope this help, -- Don Burnette D Burnette in N4 Some people do nothing wrong. The problem is, they do nothing. And THAT is wrong. "Thom j." <[email hidden]> wrote in message news:7INl6.9333$[email hidden]... > Don this was great help for me!! Would you know the settings to put into the > Driect3D section too as you did for OpenGL?? Tia.. Thom_j. > > "Don Burnette" <[email hidden]> wrote in message > news:GKGl6.318490$[email hidden]... > | Open GL does indeed automatically take advantage of the hardware TnL. > | My Open GL settings are as follows: > | > | Use desktop color depth ( mine is 16 bit) > | Buffer flipping mode: Auto Select > | Vertical Synch: Always Off > | FSAA: No antialiasing > | > | In the performance and capability options: > | > | Enable buffer region extension: Checked > | Allow dual planes extension to use local video memory: Checked > | Use fast linear-mipmaplinear-filtering : Checked > | All the rest unchecked. > | > | I also run in 1024x768. > | > | No idea about about the aliasing issue with D3d, I have tried it on all > | settings, don't really see a difference on the screen or in framerates. > | -- > | Don Burnette > | D Burnette in N4 > | > | Some people do nothing wrong. > | The problem is, they do nothing. > | And THAT is wrong. > | > | "Glen" <[email hidden]> wrote in message > | news:pCGl6.544$[email hidden]... > | > Yeah, running in 16bit color. When I saw how much better my D3D w/TnL > | was, > | > I started wondering if there was some setting I need to turn on for > OPENGL > | > to take advantage of TnL, but the consensus seems to be that OPEN GL > will, > | > by default, use TnL. > | > > | > Any idea about the aliasing issue with D3D? Is it possible to use AA > | w/D3d > | > in Nascar 4? > | > > | > Glen > | > > | > btw...my frame rate figures are exactly opposite of yours (running in > | > 1024x768), OPENGL = 30's D3D w TnL = 50's > | > > | > Don Burnette wrote in message > | > <_lGl6.318416$[email hidden]>... > | > >That's unusual, most folks get better frame rates in Open GL. You > running > | > in > | > >16 bit color? > | > >For example, my frame rates in Open Gl are in the 50's, in D3d w/TnL > Hal > | > >they are in the 30's. > | > > > | > >-- > | > >Don Burnette > | > >D Burnette in N4 > | > > > | > >Some people do nothing wrong. > | > >The problem is, they do nothing. > | > >And THAT is wrong. > | > > > | > >"Glen" <[email hidden]> wrote in message > | > >news:hgGl6.539$[email hidden]... > | > >> I have a PIII 650 (oc'ed to 806) and a GeForce GTS card (using 6.5? > | > >> drivers). I have heard people say that OPENGL mode is preferable and > | > that > | > >> it automatically will take advantage of TnL. I find that when I > select > | > >D3D > | > >> w/TnL that my frame rate is MUCH higher (12 - 17 fps higher on > | average!) > | > >> than when I use OPENGL (all graphics options being equal - including > | > >turning > | > >> AA off when running in OPENGL). > | > >> > | > >> So you'd think that D3D is the obvious option for me to run > | > in....however, > | > >> anti-aliasing does not work in this mode. I know that AA with D3D > was > | an > | > >> early problem with GeForce cards. Is this still the case? Or is > there > | > >> something I am missing? I have AA 'forced' in my display control. > | > >> > | > >> If AA is not going to be possible for D3D, is there something I can > do > | to > | > >> ensure that OPEN GL mode is taking advantage of the TnL? > | > >> > | > >> Any help appreciated. > | > >> > | > >> Glen > | > >> > | > >> > | > >> > | > > > | > > > | > > | > > | > | > >
Yes, Open GL should be the better performance wise of the 2. Some folks tend to prefer the d3d image, I personally can't tell a lot of difference in the 2 image wise, but get much better performance using Open GL. And yes, at most tracks your frame rate will be the worse going down the frontstretch with everying it has to draw. -- Don Burnette D Burnette in N4 Some people do nothing wrong. The problem is, they do nothing. And THAT is wrong. "Thom j." <[email hidden]> wrote in message news:6mOl6.9435$[email hidden]... > Don I followed you instruction below for OpenGL. Here is what I found in > "Daytona night".... Alone in testing turns 1&3 = 90-94fps 2&3= 70-75fps. > I guess the lower fps in 2&3 as the stands came into view? > In a 21car race at the back of the pack at start 30-35fps after moving into > the start flag up to 45-49fps & finally racing several laps consistantly in > the > 50fps depending on how many cars around me. Car draw 8 front 4 back! > I will test the same with D3d later as this is what I was using but it seems > OpenGL is the better of the 2?...Thanx Again.. Thom_j. > PC Specs: > Pent III 800mhz CPU, Abit SA6R mo'board, 256megs of PC133Dram, > Asus V7700 64mb GeForce2 Pro video card, Twin Voodoo2 cards in > SLI, Three-30gig Hardrives, ViewSonic PS790 20" Monitor, Quillemot > FF Ferrari Race Wheel and Quillemot FF Joystick.. > > > "Don Burnette" <[email hidden]> wrote in message > news:GKGl6.318490$[email hidden]... > | Open GL does indeed automatically take advantage of the hardware TnL. > | My Open GL settings are as follows: > | > | Use desktop color depth ( mine is 16 bit) > | Buffer flipping mode: Auto Select > | Vertical Synch: Always Off > | FSAA: No antialiasing > | > | In the performance and capability options: > | > | Enable buffer region extension: Checked > | Allow dual planes extension to use local video memory: Checked > | Use fast linear-mipmaplinear-filtering : Checked > | All the rest unchecked. > | > | I also run in 1024x768. > | > | No idea about about the aliasing issue with D3d, I have tried it on all > | settings, don't really see a difference on the screen or in framerates. > | -- > | Don Burnette > | D Burnette in N4 > | > | Some people do nothing wrong. > | The problem is, they do nothing. > | And THAT is wrong. > | > | "Glen" <[email hidden]> wrote in message > | news:pCGl6.544$[email hidden]... > | > Yeah, running in 16bit color. When I saw how much better my D3D w/TnL > | was, > | > I started wondering if there was some setting I need to turn on for > OPENGL > | > to take advantage of TnL, but the consensus seems to be that OPEN GL > will, > | > by default, use TnL. > | > > | > Any idea about the aliasing issue with D3D? Is it possible to use AA > | w/D3d > | > in Nascar 4? > | > > | > Glen > | > > | > btw...my frame rate figures are exactly opposite of yours (running in > | > 1024x768), OPENGL = 30's D3D w TnL = 50's > | > > | > Don Burnette wrote in message > | > <_lGl6.318416$[email hidden]>... > | > >That's unusual, most folks get better frame rates in Open GL. You > running > | > in > | > >16 bit color? > | > >For example, my frame rates in Open Gl are in the 50's, in D3d w/TnL > Hal > | > >they are in the 30's. > | > > > | > >-- > | > >Don Burnette > | > >D Burnette in N4 > | > > > | > >Some people do nothing wrong. > | > >The problem is, they do nothing. > | > >And THAT is wrong. > | > > > | > >"Glen" <[email hidden]> wrote in message > | > >news:hgGl6.539$[email hidden]... > | > >> I have a PIII 650 (oc'ed to 806) and a GeForce GTS card (using 6.5? > | > >> drivers). I have heard people say that OPENGL mode is preferable and > | > that > | > >> it automatically will take advantage of TnL. I find that when I > select > | > >D3D > | > >> w/TnL that my frame rate is MUCH higher (12 - 17 fps higher on > | average!) > | > >> than when I use OPENGL (all graphics options being equal - including > | > >turning > | > >> AA off when running in OPENGL). > | > >> > | > >> So you'd think that D3D is the obvious option for me to run > | > in....however, > | > >> anti-aliasing does not work in this mode. I know that AA with D3D > was > | an > | > >> early problem with GeForce cards. Is this still the case? Or is > there > | > >> something I am missing? I have AA 'forced' in my display control. > | > >> > | > >> If AA is not going to be possible for D3D, is there something I can > do > | to > | > >> ensure that OPEN GL mode is taking advantage of the TnL? > | > >> > | > >> Any help appreciated. > | > >> > | > >> Glen > | > >> > | > >> > | > >> > | > > > | > > > | > > | > > | > | > >
Thanx again Don, I would have replied sooner but my dumb *New* cable modem went down again... Grrrrrr ;o( Now I a demanding all new hardware from my cable company & they better get their butts out here fast too! I've got some serious n4, gpl and sbk2001 online racin' to do!! hahahaha... Anyway thanx again Don!! Cheers Thom_j. "Don Burnette" <[email hidden]> wrote in message news:KORl6.319485$[email hidden]...
Quoted text (54 lines)| Sure, here is what I have | | Under D3D: | Enable fog table emulations: Checked | Adjust Z Buffer depth to rendering depth if unequal: Checked | Enable alternate depth buffereing: Unchecked | Display logo when running d3d: Unchecked | | Mipmapping detail level: Blend | PCI texture memory size : 15 mb | | Under More D3D | Texel alignment value: 3 | Vertical Synch: Always Off | Render no more than 0 frames ahead | | Then under the antialiasing tab: Off | | Hope this help, | | -- | Don Burnette | D Burnette in N4 | | Some people do nothing wrong. | The problem is, they do nothing. | And THAT is wrong. | | "Thom j." <[email hidden]> wrote in message | news:7INl6.9333$[email hidden]... | > Don this was great help for me!! Would you know the settings to put into | the | > Driect3D section too as you did for OpenGL?? Tia.. Thom_j. | > | > "Don Burnette" <[email hidden]> wrote in message | > news:GKGl6.318490$[email hidden]... | > | Open GL does indeed automatically take advantage of the hardware TnL. | > | My Open GL settings are as follows: | > | | > | Use desktop color depth ( mine is 16 bit) | > | Buffer flipping mode: Auto Select | > | Vertical Synch: Always Off | > | FSAA: No antialiasing | > | | > | In the performance and capability options: | > | | > | Enable buffer region extension: Checked | > | Allow dual planes extension to use local video memory: Checked | > | Use fast linear-mipmaplinear-filtering : Checked | > | All the rest unchecked. | > | | > | I also run in 1024x768. | > | | > | No idea about about the aliasing issue with D3d, I have tried it on
all | > | settings, don't really see a difference on the screen or inframerates.
Quoted text (11 lines)| > | -- | > | Don Burnette | > | D Burnette in N4 | > | | > | Some people do nothing wrong. | > | The problem is, they do nothing. | > | And THAT is wrong. | > | | > | "Glen" <[email hidden]> wrote in message | > | news:pCGl6.544$[email hidden]... | > | > Yeah, running in 16bit color. When I saw how much better my D3D
w/TnL
Quoted text (8 lines)| > | was, | > | > I started wondering if there was some setting I need to turn on for | > OPENGL | > | > to take advantage of TnL, but the consensus seems to be that OPEN GL | > will, | > | > by default, use TnL. | > | > | > | > Any idea about the aliasing issue with D3D? Is it possible to use
AA | > | w/D3d | > | > in Nascar 4? | > | > | > | > Glen | > | > | > | > btw...my frame rate figures are exactly opposite of yours (runningin
Quoted text (9 lines)| > | > 1024x768), OPENGL = 30's D3D w TnL = 50's | > | > | > | > Don Burnette wrote in message | > | > <_lGl6.318416$[email hidden]>... | > | > >That's unusual, most folks get better frame rates in Open GL. You | > running | > | > in | > | > >16 bit color? | > | > >For example, my frame rates in Open Gl are in the 50's, in D3d
w/TnL
Quoted text (14 lines)| > Hal | > | > >they are in the 30's. | > | > > | > | > >-- | > | > >Don Burnette | > | > >D Burnette in N4 | > | > > | > | > >Some people do nothing wrong. | > | > >The problem is, they do nothing. | > | > >And THAT is wrong. | > | > > | > | > >"Glen" <[email hidden]> wrote in message | > | > >news:hgGl6.539$[email hidden]... | > | > >> I have a PIII 650 (oc'ed to 806) and a GeForce GTS card (using
6.5?
Quoted text (16 lines)| > | > >> drivers). I have heard people say that OPENGL mode is preferable | and | > | > that | > | > >> it automatically will take advantage of TnL. I find that when I | > select | > | > >D3D | > | > >> w/TnL that my frame rate is MUCH higher (12 - 17 fps higher on | > | average!) | > | > >> than when I use OPENGL (all graphics options being equal - | including | > | > >turning | > | > >> AA off when running in OPENGL). | > | > >> | > | > >> So you'd think that D3D is the obvious option for me to run | > | > in....however, | > | > >> anti-aliasing does not work in this mode. I know that AA with
D3D | > was | > | an | > | > >> early problem with GeForce cards. Is this still the case? Or is | > there | > | > >> something I am missing? I have AA 'forced' in my displaycontrol. | > | > >> | > | > >> If AA is not going to be possible for D3D, is there something Ican
Quoted text (20 lines)| > do | > | to | > | > >> ensure that OPEN GL mode is taking advantage of the TnL? | > | > >> | > | > >> Any help appreciated. | > | > >> | > | > >> Glen | > | > >> | > | > >> | > | > >> | > | > > | > | > > | > | > | > | > | > | | > | | > | > | |
Glad to help Thom. -- Don Burnette D Burnette in N4 Some people do nothing wrong. The problem is, they do nothing. And THAT is wrong. "Thom j." <[email hidden]> wrote in message news:UFam6.12301$[email hidden]... > Thanx again Don, I would have replied sooner but my dumb *New* > cable modem went down again... Grrrrrr ;o( Now I a demanding all > new hardware from my cable company & they better get their butts > out here fast too! I've got some serious n4, gpl and sbk2001 online > racin' to do!! hahahaha... Anyway thanx again Don!! > Cheers Thom_j. > > "Don Burnette" <[email hidden]> wrote in message > news:KORl6.319485$[email hidden]... > | Sure, here is what I have > | > | Under D3D: > | Enable fog table emulations: Checked > | Adjust Z Buffer depth to rendering depth if unequal: Checked > | Enable alternate depth buffereing: Unchecked > | Display logo when running d3d: Unchecked > | > | Mipmapping detail level: Blend > | PCI texture memory size : 15 mb > | > | Under More D3D > | Texel alignment value: 3 > | Vertical Synch: Always Off > | Render no more than 0 frames ahead > | > | Then under the antialiasing tab: Off > | > | Hope this help, > | > | -- > | Don Burnette > | D Burnette in N4 > | > | Some people do nothing wrong. > | The problem is, they do nothing. > | And THAT is wrong. > | > | "Thom j." <[email hidden]> wrote in message > | news:7INl6.9333$[email hidden]... > | > Don this was great help for me!! Would you know the settings to put into > | the > | > Driect3D section too as you did for OpenGL?? Tia.. Thom_j. > | > > | > "Don Burnette" <[email hidden]> wrote in message > | > news:GKGl6.318490$[email hidden]... > | > | Open GL does indeed automatically take advantage of the hardware TnL. > | > | My Open GL settings are as follows: > | > | > | > | Use desktop color depth ( mine is 16 bit) > | > | Buffer flipping mode: Auto Select > | > | Vertical Synch: Always Off > | > | FSAA: No antialiasing > | > | > | > | In the performance and capability options: > | > | > | > | Enable buffer region extension: Checked > | > | Allow dual planes extension to use local video memory: Checked > | > | Use fast linear-mipmaplinear-filtering : Checked > | > | All the rest unchecked. > | > | > | > | I also run in 1024x768. > | > | > | > | No idea about about the aliasing issue with D3d, I have tried it on > all > | > | settings, don't really see a difference on the screen or in > framerates. > | > | -- > | > | Don Burnette > | > | D Burnette in N4 > | > | > | > | Some people do nothing wrong. > | > | The problem is, they do nothing. > | > | And THAT is wrong. > | > | > | > | "Glen" <[email hidden]> wrote in message > | > | news:pCGl6.544$[email hidden]... > | > | > Yeah, running in 16bit color. When I saw how much better my D3D > w/TnL > | > | was, > | > | > I started wondering if there was some setting I need to turn on for > | > OPENGL > | > | > to take advantage of TnL, but the consensus seems to be that OPEN GL > | > will, > | > | > by default, use TnL. > | > | > > | > | > Any idea about the aliasing issue with D3D? Is it possible to use > AA > | > | w/D3d > | > | > in Nascar 4? > | > | > > | > | > Glen > | > | > > | > | > btw...my frame rate figures are exactly opposite of yours (running > in > | > | > 1024x768), OPENGL = 30's D3D w TnL = 50's > | > | > > | > | > Don Burnette wrote in message > | > | > <_lGl6.318416$[email hidden]>... > | > | > >That's unusual, most folks get better frame rates in Open GL. You > | > running > | > | > in > | > | > >16 bit color? > | > | > >For example, my frame rates in Open Gl are in the 50's, in D3d > w/TnL > | > Hal > | > | > >they are in the 30's. > | > | > > > | > | > >-- > | > | > >Don Burnette > | > | > >D Burnette in N4 > | > | > > > | > | > >Some people do nothing wrong. > | > | > >The problem is, they do nothing. > | > | > >And THAT is wrong. > | > | > > > | > | > >"Glen" <[email hidden]> wrote in message > | > | > >news:hgGl6.539$[email hidden]... > | > | > >> I have a PIII 650 (oc'ed to 806) and a GeForce GTS card (using > 6.5? > | > | > >> drivers). I have heard people say that OPENGL mode is preferable > | and > | > | > that > | > | > >> it automatically will take advantage of TnL. I find that when I > | > select > | > | > >D3D > | > | > >> w/TnL that my frame rate is MUCH higher (12 - 17 fps higher on > | > | average!) > | > | > >> than when I use OPENGL (all graphics options being equal - > | including > | > | > >turning > | > | > >> AA off when running in OPENGL). > | > | > >> > | > | > >> So you'd think that D3D is the obvious option for me to run > | > | > in....however, > | > | > >> anti-aliasing does not work in this mode. I know that AA with > D3D > | > was > | > | an > | > | > >> early problem with GeForce cards. Is this still the case? Or is > | > there > | > | > >> something I am missing? I have AA 'forced' in my display > control. > | > | > >> > | > | > >> If AA is not going to be possible for D3D, is there something I > can > | > do > | > | to > | > | > >> ensure that OPEN GL mode is taking advantage of the TnL? > | > | > >> > | > | > >> Any help appreciated. > | > | > >> > | > | > >> Glen > | > | > >> > | > | > >> > | > | > >> > | > | > > > | > | > > > | > | > > | > | > > | > | > | > | > | > > | > > | > | > >
On Sat, 24 Feb 2001 17:04:51 GMT, "Don Burnette" <[email hidden]> wrote: >Yes, Open GL should be the better performance wise of the 2. Some folks tend >to prefer the d3d image, I personally can't tell a lot of difference in the >2 image wise, but get much better performance using Open GL. >And yes, at most tracks your frame rate will be the worse going down the >frontstretch with everying it has to draw. Yup, press 'O' once to turn the grandstands off, saves a lot of fps at the s/f line. Andre "Michael feels the same way about safety in auto racing as I do. Great minds think alike." - David G Fisher

Sponsors

Affiliate Links

Sim Gaming Expo MOZA Racing Sim-Lab Fanatec TrakRacer Asetek Internet Privacy From NordVPN Dreamhost Capital One Credit Card Application Fanatical CDKeys Amazon Amazon UK Project Motor Racing iRacing Get your racing gloves, boots and more from Demon Tweeks. Enlist at Roberts Space Industries, developers of Star Citizen and Squadron 42


Back from the ashes since July, 2019. First created in 2001 with the merger of Legends Central (founded 1999) and simracing.dk.

A site by a sort of sim racer, for sim racers, about racing sims. News and information on both modern and historic sim racing software titles.

All products and licenses property of their respective owners.


Facebook Threads Bluesky Twitter Mastodon Instagram YouTube Tiktok Twitch Reddit Google News Apple News Subscribe via WordPress Flipboard eBay

Race Sim Central © 1999-2026 | Some links pay RSC a commission. Advertising does not equal endorsement.Cookie Policy