Sounds like your trying to join a race that has already started.
--
Don Burnette
D Burnette in N4
Some people do nothing wrong.
The problem is, they do nothing.
And THAT is wrong.
"Ron Huettner" <[email hidden]> wrote in message
news:97c7af$rui$[email hidden]...
> Hi All,
>
> I have managed to get to the point where I can see all the races to join.
> But when I try to join a race, I get an error message while connecting the
> says, "Timed Out Opening Communications Channel".
>
> Any ideas?
> -R
>
>
I got this same error message a *lot*... it sometimes took a dozen or so
tries to get to the "Welcome" in GPL's multiplayer screen, and even when I
finally got into the race I usually got cut off within 2 or 3 minutes.
The solution? I updated my modem drivers (duh!). Now I connect first time in
95% of cases, and disco's are few and far between. Try www.lagless.com for
starters.
HTH
Jim
"Don Burnette" <[email hidden]> wrote in message
news:Fjhm6.324370$[email hidden]...
join.
> > But when I try to join a race, I get an error message while connectingthe
Quoted text (15 lines)
> Sounds like your trying to join a race that has already started. > > -- > Don Burnette > D Burnette in N4 > > Some people do nothing wrong. > The problem is, they do nothing. > And THAT is wrong. > > "Ron Huettner" <[email hidden]> wrote in message > news:97c7af$rui$[email hidden]... > > Hi All, > > > > I have managed to get to the point where I can see all the races toQuoted text (8 lines)
> > says, "Timed Out Opening Communications Channel". > > > > Any ideas? > > -R > > > > > >Hi All,
I have managed to get to the point where I can see all the races to join.
But when I try to join a race, I get an error message while connecting the
says, "Timed Out Opening Communications Channel".
Any ideas?
-R
Is this a problem with N4? Do you have multiple TCP/IP devices in your
system? If so you probably need to 1.0.0.1 patch:
http://www.papy.com/downloads/n4.1.0.0.1.exe
Note that after the patch is installed you'll also need to ensure that
you've selected the correct TCP/IP device to use in the sierra.com's
"Connect Via" drop-down list.
--
Eric
"Ron Huettner" <[email hidden]> wrote in message
news:97c7af$rui$[email hidden]...
> I have managed to get to the point where I can see all the races to join.
> But when I try to join a race, I get an error message while connecting the
> says, "Timed Out Opening Communications Channel".
That's possible, though unlikely. A race that has already started will
usually give the message "Connections are not being accepted"
Not sure exactly what the problem is, but I get the same thing with some
servers in GPL and N4. Could be a high ping or a server which is overloaded
for bandwidth maybe ?
--
Ian P
<email invalid due to spam>
Don Burnette <[email hidden]> wrote in message
news:Fjhm6.324370$[email hidden]...
> Sounds like your trying to join a race that has already started.
>
> --
> Don Burnette
> D Burnette in N4
>
> Some people do nothing wrong.
> The problem is, they do nothing.
> And THAT is wrong.
>
> "Ron Huettner" <[email hidden]> wrote in message
> news:97c7af$rui$[email hidden]...
> > Hi All,
> >
> > I have managed to get to the point where I can see all the races to
join.
> > But when I try to join a race, I get an error message while connecting
the
> > says, "Timed Out Opening Communications Channel".
> >
> > Any ideas?
> > -R
> >
> >
>
>
Make sure you pick the correct one the use in the sierra.com login box.
Eric
"Ron Huettner" <[email hidden]> wrote in message
news:97dqmk$rfe$[email hidden]...
> I do have multiple IP's so I downloaded the patch. But still no luck.Maybe
> i'll see if I can update my modem drivers like someone else said.
I do have multiple IP's so I downloaded the patch. But still no luck. Maybe
i'll see if I can update my modem drivers like someone else said.
Thanx for the suggestions,
-R
Eric Busch <[email hidden]> wrote in message
news:97cm53$2pb$[email hidden]...
join.
> > But when I try to join a race, I get an error message while connectingthe
> > says, "Timed Out Opening Communications Channel".
>
>
Quoted text (14 lines)
> Is this a problem with N4? Do you have multiple TCP/IP devices in your > system? If so you probably need to 1.0.0.1 patch: > http://www.papy.com/downloads/n4.1.0.0.1.exe > > Note that after the patch is installed you'll also need to ensure that > you've selected the correct TCP/IP device to use in the sierra.com's > "Connect Via" drop-down list. > > -- > Eric > > "Ron Huettner" <[email hidden]> wrote in message > news:97c7af$rui$[email hidden]... > > I have managed to get to the point where I can see all the races toOf the 3 IP choices, only one gives me the list of races on the next screen.
But I still cant connect to any particular race even tho I can see them all.
The timed-out message pops up pretty fast when trying to join a race.
-R
Eric Busch <[email hidden]> wrote in message
news:97dtb1$k2o$[email hidden]...
Quoted text (12 lines)
> Make sure you pick the correct one the use in the sierra.com login box. > > Eric > > > "Ron Huettner" <[email hidden]> wrote in message > news:97dqmk$rfe$[email hidden]... > > I do have multiple IP's so I downloaded the patch. But still no luck. > Maybe > > i'll see if I can update my modem drivers like someone else said. > >In article <_vhm6.27380$[email hidden]>, "Jim L"
<[email hidden]> writes:
Shi...er, I mean, SHOOT. I never even *thought* of trying to upgrade my modem
drivers...
Doh!
Uh, thanks...
Eldred
--
Dale Earnhardt, Sr. 1951-2001
Homepage - http://www.umich.edu/~epickett
GPL F1 hcp. +28.67...F2 +151.26...F3 hcp. +373.73
Never argue with an idiot. He brings you down to his level, then beats you
with experience...
Remove SPAM-OFF to reply.


































