Re: GPL Frame rate

Kevin, One post is plenty of the exact same header!! :o) "Kevin Barnes" <[email hidden]> wrote in message news:jFSm6.2185$[email hidden]... | Can anyone let me know what sort of frame rate i should be getting. Imusing <snipped>

"Roger Squires" <[email hidden]> wrote in message news:97gtnr$6ugs$[email hidden]... > Install this gpl 3dfx tweaker and set MirrorUpdate = 2 for betterframerate > at race starts: > http://home.swbell.net/gmsmiley/ > Speaking of this great tool, is there any way to make this work under D3D? I mean, the touring car mirror was pretty cool... I'd like to use that again... /Thomas

Hi IF you are getting 36 when you are running, and 20 on the grid. I wouldn't have thought you are a million miles out. Depends on other cars on grid and resolution. Its comparable to my amd k6-2 550 v3000 sb live 1024, 128 mb Cheers Martin "pHrenZee" <[email hidden]> wrote in message news:97h8lg$25j4$[email hidden]...

Quoted text (9 lines)

> "Roger Squires" <[email hidden]> wrote in message > news:97gtnr$6ugs$[email hidden]... > > Install this gpl 3dfx tweaker and set MirrorUpdate = 2 for better > framerate > > at race starts: > > http://home.swbell.net/gmsmiley/ > > > > Speaking of this great tool, is there any way to make this work under D3D?

I > mean, the touring car mirror was pretty cool... I'd like to use that > again... > > /Thomas > >

Now THAT is a kick ass patch! Thanks alot! Rik Roger Squires <[email hidden]> wrote in message news:97gtnr$6ugs$[email hidden]... > Install this gpl 3dfx tweaker and set MirrorUpdate = 2 for betterframerate

Quoted text (8 lines)

> at race starts: > http://home.swbell.net/gmsmiley/ > > rms > [email hidden] > > >

On Tue, 27 Feb 2001 12:06:01 -0700, "Roger Squires" <[email hidden]> wrote: >Install this gpl 3dfx tweaker and set MirrorUpdate = 2 for better framerate >at race starts: >http://home.swbell.net/gmsmiley/ I actually use 9 and the mirrors remain usable. The old Voodoo2 and Celeron 400 ain't long for this box, though... Regards, Brett C. Cammack brettDOTcammack@worldnetDOTattDOTnet (remove the DOTs from my return address to reply privately)

You are actually doing pretty decent for a 500 Mhz processor and lots of eye candy. I'd recommend setting the Detail Bias closer to 1/2 or 2/3rds to the right. Other big differences will be turning off Beveled Tires, Driver Arms, and setting your mirrors to Cars Only. That Glide wrapper will help bunches, too. Regards, Brett C. Cammack brettDOTcammack@worldnetDOTattDOTnet (remove the DOTs from my return address to reply privately)

Hello, what is a good frame rate for GPL ? I get about 12 fps at the start of the race and it goes up to about 33 fps. I run it at 800 x 600 and I had the detail bias at the middle. I have a PIII 500, 32 mg Anihilator 2 geforce GTS, 256 mg ram, Creative soundblaster live OEM. What should I be expecting ? What is a good frame rate to compare with ? Thanks Daryll PS. that's in the cock pit mode. I also have the D3D patch with the new GPL 1.2.

The GPL frame rate is capped at 36fps maximum. With that PC you should be getting 36 almost all the time, and you should be able to run at 1024x768. You might want to try moving the detail bias slider (in the graphics options screen) to the left until the frame rate improves. I have a PII 333, Voodoo 3 3000 AGP, 128MB RAM and I get 36 fps all the time at 1024x768. The frame rate in GPL is deceiving: if it gets below 36 it is immediately obvious, unlike most driving games which degrade gradually. You really want to have 36 consistently. "djs" <[email hidden]> wrote in message news:8yfn6.3547$[email hidden]... > Hello, what is a good frame rate for GPL ? I get about 12 fps at thestart > of the race and it goes up to about 33 fps. I run it at 800 x 600 and Ihad > the detail bias at the middle. I have a PIII 500, 32 mg Anihilator 2 > geforce GTS, 256 mg ram, Creative soundblaster live OEM. What should I be > expecting ? What is a good frame rate to compare with ? Thanks DaryllPS. > that's in the cock pit mode. I also have the D3D patch with the new GPL > 1.2. > >

"djs" <[email hidden]> wrote in message news:8yfn6.3547$[email hidden]... > Hello, what is a good frame rate for GPL ? I get about 12 fps at thestart > of the race and it goes up to about 33 fps. I run it at 800 x 600 and Ihad > the detail bias at the middle. I have a PIII 500, 32 mg Anihilator 2 > geforce GTS, 256 mg ram, Creative soundblaster live OEM. What should I be > expecting ? What is a good frame rate to compare with ? Thanks DaryllPS. > that's in the cock pit mode. I also have the D3D patch with the new GPL > 1.2. > > Max frame rate in GPL is 36, but I think there are some user patches that free this up. Have you installed the D3D patch? If you have, then something's wrong. If you haven't then install it quick, because with the patch and your system you should probably be getting max frame rates at max detail at 1024x res, maybe even higher, pretty much all the time--even at the start of a race. Jerry Morelock

Yes djs something seems radically wrong with your system & gpl with the specs you have shown below.. Rob is correct.. Good Luck Thom_j. "Rob Adams" <[email hidden]> wrote in message news:i1gn6.3009$[email hidden]... | The GPL frame rate is capped at 36fps maximum. With that PC you should be | getting 36 almost all the time, and you should be able to run at 1024x768. | You might want to try moving the detail bias slider (in the graphicsoptions | screen) to the left until the frame rate improves. I have a PII 333,Voodoo | 3 3000 AGP, 128MB RAM and I get 36 fps all the time at 1024x768. | | The frame rate in GPL is deceiving: if it gets below 36 it is immediately | obvious, unlike most driving games which degrade gradually. You reallywant

Quoted text (10 lines)

| to have 36 consistently. | | "djs" <[email hidden]> wrote in message | news:8yfn6.3547$[email hidden]... | > Hello, what is a good frame rate for GPL ? I get about 12 fps at the | start | > of the race and it goes up to about 33 fps. I run it at 800 x 600 and I | had | > the detail bias at the middle. I have a PIII 500, 32 mg Anihilator 2 | > geforce GTS, 256 mg ram, Creative soundblaster live OEM. What should I

be

Quoted text (8 lines)

| > expecting ? What is a good frame rate to compare with ? Thanks Daryll | PS. | > that's in the cock pit mode. I also have the D3D patch with the new GPL | > 1.2. | > | > | |

Sounds like your a little low. I have a... Dell p3 600 256 megs ram sblive geforce 256 (32meg) At the start at Monaco, at the back, 32 fps, within a few seconds, a rock solid 36 fps. Mike

20 fps, but at which track? Some tracks are a lot slower than other. If I can remember correctly from when I had a V5 5500 AGP I used to get about 27 fps under the following conditions with a P3-450. Try the same settings and see what results you get- Race-start at Monza, before the flag drops, in-car view, 1024*768, detail slider bar on full, all graphics options on (including full mirrors) max simulateous sounds. That's at the very back of a full grid (19 oponents). If you get ~27 then everything is probably setup right. You might want to replace your CPU since they're pretty cheap now. "Kevin Barnes" <[email hidden]> wrote in message news:3FSm6.2182$[email hidden]... > Can anyone let me know what sort of frame rate i should be getting. Imusing > a PIII 500 128 ram voodoo 5 5500 agp. I use minimum sounds and only carsand > track in mirrors. Despite this at the start of races i only seem to get > about 20 fps (i use a high resolution). Once race is underway i get 36 > pretty well most of time > Is this normal or have i got something set wrong. I have a couple of files > (glide ini and glide2xlog) could something be set wrong in these. (what > should settings be). I tried removing these but then i get the smallscreen > in top left of monitor on menus but still no difference in frame rate. > I am using 3dfx. D3D seems to heve even worse results. > Hope someone can put me on the right track > Kev Barnes > >

Ok I tried Monza I got 8 fps at the start of the race. I not sure if I am setting the drivers up right. Thanks again Daryll "Simon Brown" <[email hidden]> wrote in message news:VZhn6.1241$[email hidden]...

Quoted text (23 lines)

> 20 fps, but at which track? Some tracks are a lot slower than other. > > If I can remember correctly from when I had a V5 5500 AGP I used to get > about 27 fps under the following conditions with a P3-450. Try the same > settings and see what results you get- > > Race-start at Monza, before the flag drops, in-car view, 1024*768, detail > slider bar on full, all graphics options on (including full mirrors) max > simulateous sounds. That's at the very back of a full grid (19 oponents). > > If you get ~27 then everything is probably setup right. You might want to > replace your CPU since they're pretty cheap now. > > "Kevin Barnes" <[email hidden]> wrote in message > news:3FSm6.2182$[email hidden]... > > Can anyone let me know what sort of frame rate i should be getting. Im > using > > a PIII 500 128 ram voodoo 5 5500 agp. I use minimum sounds and only cars > and > > track in mirrors. Despite this at the start of races i only seem to get > > about 20 fps (i use a high resolution). Once race is underway i get 36 > > pretty well most of time > > Is this normal or have i got something set wrong. I have a couple of

files

Quoted text (11 lines)

> > (glide ini and glide2xlog) could something be set wrong in these. (what > > should settings be). I tried removing these but then i get the small > screen > > in top left of monitor on menus but still no difference in frame rate. > > I am using 3dfx. D3D seems to heve even worse results. > > Hope someone can put me on the right track > > Kev Barnes > > > > > >

Well, those numbers were on my old V5, I don't get that sort of speed from my current card (GeForce 2 gts with p3-650). I've just run the exact same test on my GF2 and I get 21/22 fps before the flag drops. I think with GF2 and P3-500 you should be getting alot more than 8 fps, probably more like 20. All I can think of is to check you're using d3d, check the d3d settings in the core.ini, and check you don't have anti-aliasing turned on in the nvidia d3d settings. "djs" <[email hidden]> wrote in message news:Lgwn6.9718$[email hidden]... > Ok I tried Monza I got 8 fps at the start of the race. I not sure if I am > setting the drivers up right. Thanks again Daryll