Re: New pots

**** Post for FREE via your newsreader at post.usenet.com **** Yes, this provides the best resolution. -Larry "Incubus" <[email hidden]> wrote in message news:cJQm6.7705$[email hidden]...

Quoted text (7 lines)

> For the pots, maximum rotation. > > "Michael Barlow" <[email hidden]> wrote in message > news:iJOm6.146415$[email hidden]... > > For the last couple months I've been designing a new cockpit. This > will > > be setup so I feel comfortable in a generalized racing sim, I.E. I'll

feel > > at home in either a Stock car, Open wheel mono cockpit car, and even ina > > closed wheel sports car such as a WSC prototype, ect.. This thing is > being > > developed so that it can be easily taken apart, put in the back of amini > > van or pick up or such, driven to a LAN event and put back together byone > > person. And/Or be taken apart so that the pedal and wheel only systemcan

Quoted text (10 lines)

> > be taken to that/any LAN event and used. I have a 5 foot by 4 foot dry > > erase board full of schematic drawings with measurements and such. > > > > My last problem is figuring out the ratio's between the pedal > movements > > and the pot rotations. Assuming I have a fixed pedal(s) movement, What > was > > the best setup for the pot rotation? I can't remember if a pot with > minimal > > rotation was most accurate or one with a large rotation was most

accurate. > > I.E. full rotation or parcial rotation (0-100K or 0-50K of a 100K pot). > > > > > > -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= *** Usenet.com - The #1 Usenet Newsgroup Service on The Planet! *** http://www.usenet.com -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=