Im using windows 2000, liveware 3, TNT 2 (6.18) LWFF (3.65) and DX8. GPL
was crashing after a short amount of play. I believed it was the sound
card, but I tried without my LWFF and it worked fine. I renamed my core.ini
and used the wheel, and the game worked fine besides no FF. Does anyone see
a problem with my core.ini?
Before this I tried reinstalling, 1.2 patch, d3d patch and registry editing
. . . . AFAIK the file is standard - besides the wheel info.
Thanks all
Pete
[ CLIENT ]
to_ip = ; Connect to IP address
via_ip = ; Connect via IP address
[ Communications ]
alternate_ip_addr_lookup = 0 ; Find IP addresses another way
bcast_augment_status = 0 ; Prepend status with IP address?
bcast_listserv = ; IP address of race list server
bcast_listserv_req = ; Empty string, or start with '?'
bcast_listserv_req_freq = 10.000000 ; Request race list frequency
bcast_ping_disable = 0 ; Disable response to pings
bcast_ping_port = 0 ; Ping port number (0=default)
bcast_port = 0 ; Broadcast port number (0=default)
bcast_recv_disable = 0 ; Disable broadcast reception
bcast_send_disable = 0 ; Disable sending broadcasts
bcast_send_freq = 4.000000 ; Broadcast frequency (seconds)
clock_adj_delay = 4 ; How often may client adjust
clock?
disable_ipx = 0 ; Disable IPX support
disable_modem = 0 ; Don't look for/use modems
disable_network = 0 ; Disable network support
disable_tcp_ip = 0 ; Disable TCP/IP support
ignore_net_read_errors = 1 ; Don't disco if error reading pkt
ignore_net_send_errors = 1 ; Don't disco if error sending pkt
ip_addr_lookup_timeout = 2 ; Timeout to find own IP address
log_server_comm_errors = 0 ; Log errors for client channels?
log_server_connect_status = 0 ; Issue messages as clients connect
mem_client_send_every = 1 ; Client packet freq via memory
mem_client_send_size = 276 ; Client packet size via memory
mem_server_send_every = 1 ; Server packet freq via memory
mem_server_send_size = 516 ; Server packet size via memory
net_lan_client_send_every = 2 ; Client packet freq on LAN
net_lan_client_send_size = 132 ; Client packet size on LAN
net_lan_server_send_every = 2 ; Server packet freq on LAN
net_lan_server_send_size = 388 ; Server packet size on LAN
net_mdm_client_send_every = 2 ; Client packet freq on dialup
net_mdm_client_send_size = 84 ; Client packet size on dialup
net_mdm_server_send_every = 2 ; Server packet freq on dialup
net_mdm_server_send_size = 84 ; Server packet size on dialup
net_server_port = 0 ; Server port number (0 = default)
net_use_mdm_bandwidth_for_tcp_ip = 1 ; Use modem bandwidthfor TCP/IP
[ Hack ]
steer_ratio = 1 ; Enable low speed ratio
override
[ Joy ]
allow_force_feedback = 0 ; Use FF if device has it
force_feedback_damping = 40.000000 ; force feedback damping
coefficient
force_feedback_latency = 0.085000 ; force feedback latency (secs)
max_steering_torque = 225.000000 ; steering torque in N*in giving
max device force
[ Rasterizer ]
fullScreen = 1 ; run Full Screen?
[ SERVER ]
auto_export_standings = 0 ; Auto export if launched?
dedicated = 0 ; Unattended - run server.ini races
launch = 0 ; Run GPL as a mp server
max_latency = 0.0 ; Seconds. Set to 0.0 to disable
password = ; [access][/[boss]][=f.last]
repeat = 0 ; If dedicated, repeat
(0=forever)
[ Task ]
synch_method = 1 ; Client synch method
[ Hack ]
steer_ratio = 0
[ joy ]
allow_force_feedback = 1
force_feedback_damping = 5.0
force_feedback_latency = 0.100
max_steering_torque = 225.0
if that is your .ini file then you do have a problem.
You have [joy] and [hack] parameters listed TWICE!!
Erase the last part of that .ini file and see if that fixes it.
rik.
Quoted text (12 lines)
> > [ Hack ] > steer_ratio = 0 > > [ joy ] > allow_force_feedback = 1 > force_feedback_damping = 5.0 > force_feedback_latency = 0.100 > max_steering_torque = 225.0 > > >whoops - didnt notice!
I must have used my old one from a previous install and added the end bit
without noticing
Thanks Rik
"rik anthrax" <[email hidden]> wrote in message
news:tkFD6.134687$[email hidden]...
Quoted text (19 lines)
> if that is your .ini file then you do have a problem. > You have [joy] and [hack] parameters listed TWICE!! > Erase the last part of that .ini file and see if that fixes it. > rik. > > > > > [ Hack ] > > steer_ratio = 0 > > > > [ joy ] > > allow_force_feedback = 1 > > force_feedback_damping = 5.0 > > force_feedback_latency = 0.100 > > max_steering_torque = 225.0 > > > > > > > >
Stan Marsh <Neddo69 AT hotmail DOT com> wrote in message
news:3ae059d9$0$25514$[email hidden]...
> whoops - didnt notice!
> I must have used my old one from a previous install and added the end bit
> without noticing
> Thanks Rik
>Lemme know if it fixed it. just 4 the record!
Rik
my crashing problem was that i don't brake in time for the corners. :(
regards,
ian
On Sat, 21 Apr 2001 20:05:37 GMT, "rik anthrax"
<[email hidden]> wrote:
Quoted text (11 lines)
> >Stan Marsh <Neddo69 AT hotmail DOT com> wrote in message >news:3ae059d9$0$25514$[email hidden]... >> whoops - didnt notice! >> I must have used my old one from a previous install and added the end bit >> without noticing >> Thanks Rik >> >Lemme know if it fixed it. just 4 the record! >Rik >No, im still having problems, but wont have time to look at it until about
thursday.
I'll try removing all wheel reference and see what happens then - thanks!
Pete
"rik anthrax" <[email hidden]> wrote in message
news:lKlE6.154527$[email hidden]...
>
> Stan Marsh <Neddo69 AT hotmail DOT com> wrote in message
> news:3ae059d9$0$25514$[email hidden]...
> > whoops - didnt notice!
> > I must have used my old one from a previous install and added the endbit
