I have a 700MHz PIII with a GForce II DDR. I'm running the lastest
GForce drivers, DX8 and Windows 2000.I installed the program fresh,
added the 1.2 patch and the 3d patch. I put in the core.ini file, ran
the program and picked the Direct 3D card. Everything looked GREAT
and I raced awhile. When I exited back to pits, it crashed and then
won't restart unless I reboot the computer. It is complaning about
not finding a glide2x.dll and redline.dll. I did not pick glide, but
direct 3d.
If I reboot, it always runs ok, but after a race I cannot exit to pits
and when it crashes,it will not restart again until I reboot.
Any ideas, I would love to get back into GPL again, now that I see it
will run with a GForce card.
Ron
There's something wrong if it's trying to find Glide files. Try
setting the graphics to software and restarting. Then choose d3d and
restart, with all fingers crossed!
Rafe Mc
On Sat, 29 Sep 2001 08:09:26 GMT, [email hidden] (ron behee) wrote:
Quoted text (15 lines)
>I have a 700MHz PIII with a GForce II DDR. I'm running the lastest >GForce drivers, DX8 and Windows 2000.I installed the program fresh, >added the 1.2 patch and the 3d patch. I put in the core.ini file, ran >the program and picked the Direct 3D card. Everything looked GREAT >and I raced awhile. When I exited back to pits, it crashed and then >won't restart unless I reboot the computer. It is complaning about >not finding a glide2x.dll and redline.dll. I did not pick glide, but >direct 3d. >If I reboot, it always runs ok, but after a race I cannot exit to pits >and when it crashes,it will not restart again until I reboot. > >Any ideas, I would love to get back into GPL again, now that I see it >will run with a GForce card. > >RonI tried that and software works fine, but going back to d3d keeps
asking for 2 dll's. Funny thing is, if I reboot it will go into d3d
one time, just can't leave a race or it crashes. I tried reloading
the software and doing everything clean. but no luck. It looks so
nice with d3d and the frame rate is great.
On Mon, 01 Oct 2001 05:59:00 GMT, [email hidden] (Rafe
McAuliffe) wrote:
Quoted text (24 lines)
>There's something wrong if it's trying to find Glide files. Try >setting the graphics to software and restarting. Then choose d3d and >restart, with all fingers crossed! > >Rafe Mc > >On Sat, 29 Sep 2001 08:09:26 GMT, [email hidden] (ron behee) wrote: > >>I have a 700MHz PIII with a GForce II DDR. I'm running the lastest >>GForce drivers, DX8 and Windows 2000.I installed the program fresh, >>added the 1.2 patch and the 3d patch. I put in the core.ini file, ran >>the program and picked the Direct 3D card. Everything looked GREAT >>and I raced awhile. When I exited back to pits, it crashed and then >>won't restart unless I reboot the computer. It is complaning about >>not finding a glide2x.dll and redline.dll. I did not pick glide, but >>direct 3d. >>If I reboot, it always runs ok, but after a race I cannot exit to pits >>and when it crashes,it will not restart again until I reboot. >> >>Any ideas, I would love to get back into GPL again, now that I see it >>will run with a GForce card. >> >>Ron >Have you had a 3dfx card at one stage? If so, boot into safe mode and
remove all occurrences in the device manager.
Maybe try the opengl patch, see how that goes. Yep, that software mode
is godawful, don't know why they bothered :)
Rafe Mc
On Mon, 01 Oct 2001 06:48:28 GMT, [email hidden] (ron behee) wrote:
Quoted text (33 lines)
>I tried that and software works fine, but going back to d3d keeps >asking for 2 dll's. Funny thing is, if I reboot it will go into d3d >one time, just can't leave a race or it crashes. I tried reloading >the software and doing everything clean. but no luck. It looks so >nice with d3d and the frame rate is great. > >On Mon, 01 Oct 2001 05:59:00 GMT, [email hidden] (Rafe >McAuliffe) wrote: > >>There's something wrong if it's trying to find Glide files. Try >>setting the graphics to software and restarting. Then choose d3d and >>restart, with all fingers crossed! >> >>Rafe Mc >> >>On Sat, 29 Sep 2001 08:09:26 GMT, [email hidden] (ron behee) wrote: >> >>>I have a 700MHz PIII with a GForce II DDR. I'm running the lastest >>>GForce drivers, DX8 and Windows 2000.I installed the program fresh, >>>added the 1.2 patch and the 3d patch. I put in the core.ini file, ran >>>the program and picked the Direct 3D card. Everything looked GREAT >>>and I raced awhile. When I exited back to pits, it crashed and then >>>won't restart unless I reboot the computer. It is complaning about >>>not finding a glide2x.dll and redline.dll. I did not pick glide, but >>>direct 3d. >>>If I reboot, it always runs ok, but after a race I cannot exit to pits >>>and when it crashes,it will not restart again until I reboot. >>> >>>Any ideas, I would love to get back into GPL again, now that I see it >>>will run with a GForce card. >>> >>>Ron >>Thanks, I was not aware of the opengl patch. It seems to work, but
now I can't get my thrustmaster pro digital wheel to be recognized in
the software. I'll try again tomorrow. Thanks again.
Ron
On Mon, 01 Oct 2001 12:03:42 GMT, [email hidden] (Rafe
McAuliffe) wrote:
Quoted text (45 lines)
>Have you had a 3dfx card at one stage? If so, boot into safe mode and >remove all occurrences in the device manager. > >Maybe try the opengl patch, see how that goes. Yep, that software mode >is godawful, don't know why they bothered :) > >Rafe Mc > > >On Mon, 01 Oct 2001 06:48:28 GMT, [email hidden] (ron behee) wrote: > >>I tried that and software works fine, but going back to d3d keeps >>asking for 2 dll's. Funny thing is, if I reboot it will go into d3d >>one time, just can't leave a race or it crashes. I tried reloading >>the software and doing everything clean. but no luck. It looks so >>nice with d3d and the frame rate is great. >> >>On Mon, 01 Oct 2001 05:59:00 GMT, [email hidden] (Rafe >>McAuliffe) wrote: >> >>>There's something wrong if it's trying to find Glide files. Try >>>setting the graphics to software and restarting. Then choose d3d and >>>restart, with all fingers crossed! >>> >>>Rafe Mc >>> >>>On Sat, 29 Sep 2001 08:09:26 GMT, [email hidden] (ron behee) wrote: >>> >>>>I have a 700MHz PIII with a GForce II DDR. I'm running the lastest >>>>GForce drivers, DX8 and Windows 2000.I installed the program fresh, >>>>added the 1.2 patch and the 3d patch. I put in the core.ini file, ran >>>>the program and picked the Direct 3D card. Everything looked GREAT >>>>and I raced awhile. When I exited back to pits, it crashed and then >>>>won't restart unless I reboot the computer. It is complaning about >>>>not finding a glide2x.dll and redline.dll. I did not pick glide, but >>>>direct 3d. >>>>If I reboot, it always runs ok, but after a race I cannot exit to pits >>>>and when it crashes,it will not restart again until I reboot. >>>> >>>>Any ideas, I would love to get back into GPL again, now that I see it >>>>will run with a GForce card. >>>> >>>>Ron >>> >On Tue, 02 Oct 2001 06:28:00 GMT, [email hidden] (ron behee) wrote:
>Thanks, I was not aware of the opengl patch. It seems to work, but
>now I can't get my thrustmaster pro digital wheel to be recognized in
>the software. I'll try again tomorrow. Thanks again.
>Ron
lol, there's always a catch 22 :)
Rafe Mc
Hello,
I am running a PIII 600, not near the video card you have, but I am running
in the D3D mode.
I was having the strange occurance of GPL just freezing when I exited any
track while running in a race after I got it installed - I could practice
all I wanted and I could go almost anywhere in the sim with no probs. Once
I entered a race and tried to exit - at any point during the race - the
screen would freeze and the only way to get things going again was to do a
warm boot... once rebooted, all was OK until I tried to exit another race.
I don't remember if I got the idea here, but I started turning off stuff
running in the background, starting with Norton Internet Security, which I
run since I access the Web with a cable connection. Once that was disabled,
all worked great.
Just posting what worked for me... I hope I have given you something to work
with!
KWS
"ron behee" <[email hidden]> wrote in message
news:[email hidden]...
