F1 2001 and TSW2 Spit axis

Is this possible i can seem to get it to work -- CW Webster

Surpisingly, I didn't have to do anything special to get F12001 to work with my 4-axis TSW. It would never work in 4-axis mode in F12000 or CS. Wayne Hutchison "CW Webster" <[email hidden]> wrote in message news:[email hidden]...

Quoted text (14 lines)

> can = cant sorry > > -- > CW Webster > "CW Webster" <[email hidden]> wrote in message > news:3be08ea7$[email hidden]... > > Is this possible i can seem to get it to work > > > > -- > > CW Webster > > > > > >

can = cant sorry -- CW Webster "CW Webster" <[email hidden]> wrote in message news:3be08ea7$[email hidden]... > Is this possible i can seem to get it to work > > -- > CW Webster > >

my brake works but when i let up off all the gas tires lock up..but my brakes are working..i have no probs in other games or sims -- CW Webster "Wayne Hutchison" <[email hidden]> wrote in message news:zz%D7.1083$[email hidden]... > Surpisingly, I didn't have to do anything special to get F12001 to work with > my 4-axis TSW. It would never work in 4-axis mode in F12000 or CS. > > Wayne Hutchison > > "CW Webster" <[email hidden]> wrote in message > news:[email hidden]... > > can = cant sorry > > > > -- > > CW Webster > > "CW Webster" <[email hidden]> wrote in message > > news:3be08ea7$[email hidden]... > > > Is this possible i can seem to get it to work > > > > > > -- > > > CW Webster > > > > > > > > > > > >

Works for me on WIN98SE . Go to Control Panel - Gaming Options - Controllers: Make sure your TSW2 is set up as a Custom Game Controller as described in your manual. Remove other controllers you may have - keep the TSW2 on Controller ID 1. I've had trouble assigning axes in other games when I leave other controllers on ID2 and ID3. Go to F1 2001 - Options - Controls: Assign your axes and buttons. While the track is loading (the red bar filling in from left to right): keep your brake pedal depressed. Hope this helps. CW Webster <[email hidden]> wrote in message news:3be08ea7$[email hidden]... > Is this possible i can seem to get it to work > > -- > CW Webster > >

wheel works fine in single mode but when in split its a pain the brake is working but when i let off the gas the wheels lock up like ive hit the brakes..any ideas?...i run n4 gpl and no probs at all -- CW Webster "CW Webster" <[email hidden]> wrote in message news:3be08ea7$[email hidden]... > Is this possible i can seem to get it to work > > -- > CW Webster > >

tyvm the holding the brake down fixed it -- CW Webster "leo" <[email hidden]> wrote in message news:UT%D7.19509$[email hidden]... > Works for me on WIN98SE . > > Go to Control Panel - Gaming Options - Controllers: > > Make sure your TSW2 is set up as a Custom Game Controller as described in > your manual. > Remove other controllers you may have - keep the TSW2 on Controller ID 1. > I've had trouble assigning axes in other games when I leave other > controllers on ID2 and ID3. > > Go to F1 2001 - Options - Controls: > > Assign your axes and buttons. > > While the track is loading (the red bar filling in from left to right): keep > your brake pedal depressed. > > Hope this helps. > > > CW Webster <[email hidden]> wrote in message > news:3be08ea7$[email hidden]... > > Is this possible i can seem to get it to work > > > > -- > > CW Webster > > > > > >

f1 2001 is f##**d. I have a TSW GT. No one should have to go to these lengths to get a high end controller to work. I blame it on EA. Poorly done IMO. DC CW Webster <[email hidden]> wrote in message news:3be09cc0$[email hidden]... > wheel works fine in single mode > but when in split its a pain the brake is working but when i let off thegas > the wheels lock up like ive hit the brakes..any ideas?...i run n4 gpl andno

Quoted text (14 lines)

> probs at all > > -- > CW Webster > "CW Webster" <[email hidden]> wrote in message > news:3be08ea7$[email hidden]... > > Is this possible i can seem to get it to work > > > > -- > > CW Webster > > > > > >

I agree,i cant even tell if i like the game or not till i get everything working right...im afraid to bash cause i think ill like if a patch fixes the probs -- CW Webster "David Ciemny" <[email hidden]> wrote in message news:7D9E7.1920$t%[email hidden]... > f1 2001 is f##**d. I have a TSW GT. No one should have to go to these > lengths to get a high end controller to work. I blame it on EA. Poorly done > IMO. > > DC > CW Webster <[email hidden]> wrote in message > news:3be09cc0$[email hidden]... > > wheel works fine in single mode > > but when in split its a pain the brake is working but when i let off the > gas > > the wheels lock up like ive hit the brakes..any ideas?...i run n4 gpl and > no > > probs at all > > > > -- > > CW Webster > > "CW Webster" <[email hidden]> wrote in message > > news:3be08ea7$[email hidden]... > > > Is this possible i can seem to get it to work > > > > > > -- > > > CW Webster > > > > > > > > > > > >

I agree, I've wasted way too much time trying to configure this game with the right video drivers and get it running in split axis.Actually had it running ok in combined with WIN me,then upraded to XP and back to square one as far as video goes.Oh well, I guess all we can do is wait for the patch and hope it gets looked after. "David Ciemny" <[email hidden]> wrote in message news:7D9E7.1920$t%[email hidden]... > f1 2001 is f##**d. I have a TSW GT. No one should have to go to these > lengths to get a high end controller to work. I blame it on EA. Poorlydone

Quoted text (9 lines)

> IMO. > > DC > CW Webster <[email hidden]> wrote in message > news:3be09cc0$[email hidden]... > > wheel works fine in single mode > > but when in split its a pain the brake is working but when i let off the > gas > > the wheels lock up like ive hit the brakes..any ideas?...i run n4 gpl

and

Quoted text (17 lines)

> no > > probs at all > > > > -- > > CW Webster > > "CW Webster" <[email hidden]> wrote in message > > news:3be08ea7$[email hidden]... > > > Is this possible i can seem to get it to work > > > > > > -- > > > CW Webster > > > > > > > > > > > >

In article <xCGE7.35464$[email hidden]>, "SIRO" <[email hidden]> writes: >I agree, I've wasted way too much time trying to configure this game with >the right video drivers and get it running in split axis.Actually had it >running ok in combined with WIN me,then upraded to XP and back to square one >as far as video goes.Oh well, I guess all we can do is wait for the patch >and hope it gets looked after. I didn't have any problems getting F12001 to work with my TSW2. I was pleasantly surprised. When I started the game, I held down both pedals. In the config screen, it found every control I wanted to use. I don't know if holding the pedals was needed, but it was a trick I used in F12k and SBK2001... But, I'm also using 98se. Maybe it's just an XP issue - I don't think you can blame EA for that... Eldred -- Dale Earnhardt, Sr. R.I.P. 1951-2001 Homepage - http://www.umich.edu/~epickett GPLRank - under construction... Never argue with an idiot. He brings you down to his level, then beats you with experience... Remove SPAM-OFF to reply.

On 03 Nov 2001 04:07:41 GMT, EldredP <[email hidden]> wrote: > > I didn't have any problems getting F12001 to work with my TSW2. I was I have it first hand from Dave Jr. himself that he could not get his TSW to work with F1 2001. If your TSW features the "wiggle" during calibration (the jumping up and down on the non existant axis), then your TSW will probably not work in split axis mode. (Win98) I don't know about XP because I wouldn't even touch it with a ten foot pole. Cheers, Uwe -- Uwe Schuerkamp //////////////////////////// http://www.schuerkamp.de/ Herford, Germany \\\\\\\\\\\\\\\\\\\\\\\\\\ (52.0N/8.5E) Ever wondered what's wrong with the world? http://bnetwork.com/ PGP Fingerprint: 2E 13 20 22 9A 3F 63 7F 67 6F E9 B1 A8 36 A4 61

My TSW2Mod works in F1 2001. I had to map the clutch pedal to brake pedal though. I think I'll try the trick that Eldred posted about pushing the pedals in when I start the game. Maybe I can get the brake pedal to work and the clutch pedal too. Right now the brake is the clutch and the brake pedal doesn't work. -- Richard "ZZ" Busch Member: Screamers Racing League GPL Rank + 27.58 http://www.ZZBusch.com ---------------- Busch Motorsports: Remember racecar is racecar spelled backward ----------------- Busch Carpentry: Plans? Oh, you mean that napkin sketch? ----------------- Stressed is just Desserts backwards

My TSW2Mod works in F1 2001. I had to map the clutch pedal to brake pedal though. I think I'll try the trick that Eldred posted about pushing the pedals in when I start the game. Maybe I can get the brake pedal to work and the clutch pedal too. Right now the brake is the clutch and the brake pedal doesn't work. -- Richard "ZZ" Busch Member: Screamers Racing League GPL Rank + 27.58 http://www.ZZBusch.com ---------------- Busch Motorsports: Remember racecar is racecar spelled backward ----------------- Busch Carpentry: Plans? Oh, you mean that napkin sketch? ----------------- Stressed is just Desserts backwards

Doesn't work in XP either.Any chance this will be fixed in the patch? "Uwe Schuerkamp" <[email hidden]> wrote in message news:[email hidden]...

Quoted text (24 lines)

> On 03 Nov 2001 04:07:41 GMT, EldredP <[email hidden]> wrote: > > > > I didn't have any problems getting F12001 to work with my TSW2. I was > > I have it first hand from Dave Jr. himself that he could not > get his TSW to work with F1 2001. If your TSW features the > "wiggle" during calibration (the jumping up and down on the non > existant axis), then your TSW will probably not work in split > axis mode. (Win98) > > I don't know about XP because I wouldn't even touch it with a ten > foot pole. > > Cheers, > > Uwe > > > > -- > Uwe Schuerkamp //////////////////////////// http://www.schuerkamp.de/ > Herford, Germany \\\\\\\\\\\\\\\\\\\\\\\\\\ (52.0N/8.5E) > Ever wondered what's wrong with the world? http://bnetwork.com/ > PGP Fingerprint: 2E 13 20 22 9A 3F 63 7F 67 6F E9 B1 A8 36 A4 61

In article <[email hidden]>, Uwe Schuerkamp <[email hidden]> writes:

Quoted text (10 lines)

>On 03 Nov 2001 04:07:41 GMT, EldredP <[email hidden]> wrote: >> >> I didn't have any problems getting F12001 to work with my TSW2. I was > >I have it first hand from Dave Jr. himself that he could not >get his TSW to work with F1 2001. If your TSW features the >"wiggle" during calibration (the jumping up and down on the non >existant axis), then your TSW will probably not work in split >axis mode. (Win98) >

"Non existent axis"? Which calibration screen, Win98 or F12001? How did you get an 'extra' axis? >I don't know about XP because I wouldn't even touch it with a ten >foot pole. Me neither. eldred -- Dale Earnhardt, Sr. R.I.P. 1951-2001 Homepage - http://www.umich.edu/~epickett GPLRank - under construction... Never argue with an idiot. He brings you down to his level, then beats you with experience... Remove SPAM-OFF to reply.