Race Sim Central
Rec.Autos.Simulators Archive

0-60 and 1/4 mile times

12 posts by 9 people · 23 Dec 2001 03:48 UTC - 28 Dec 2001 17:45 UTC

[email hidden] (J. Todd Wasson) wrote in <20011222224834.04912.00000665@mb- fi.aol.com>:
Quoted text (7 lines)> In case somebody might be interested, here's a listing of 0-60 mph and >quarter mile times for a huge amount of cars. Great for you vehicle >modeller/physics guys ;-) > >http://www.missouri.edu/~apcb20/times.html > >Todd Wasson
Here's another one: http://www.syclone.freeserve.co.uk/rivals.htm -- Don Scurlock Vancouver,B.C. GPLRank -15.39 MonsterRank 90.86 Come see how you rank, at the GPLRank site http://newgplrank.schuerkamp.de/
J. Todd Wasson <[email hidden]> wrote on 23 Dec 2001: > In case somebody might be interested, here's a listing of 0-60 > mph and > quarter mile times for a huge amount of cars. Great for you > vehicle modeller/physics guys ;-) > > http://www.missouri.edu/~apcb20/times.html Interesting. Anyone got a similar list for European cars? I'd like to see how the new MG saloons (ZR, ZS, ZT) compare. -- "After all, a mere thousand yards - such a harmless little knoll, really" - Raymond Mays on Shelsley Walsh. The GPL Scrapyard returns (slowly): http://www.hillclimbfan.f2s.com
On 23 Dec 2001 03:48:34 GMT, [email hidden] (J. Todd Wasson) wrote: > In case somebody might be interested, here's a listing of 0-60 mph and >quarter mile times for a huge amount of cars. Great for you vehicle >modeller/physics guys ;-) > >http://www.missouri.edu/~apcb20/times.html Todd, Interesting information but not very reliable. How can anyone say "This is THE 0-60 and 1/4 mile time for this car"? There are way too many factors that govern the results, such as temperature, humidity, barometric pressure, fuel quality, shift speed, etc. and so on. Perfect example -- I used to have a 1998 Pontiac Formula. It was bone stock except for a Flowmaster muffler. I ran a best 1/4 mile in that car of 13.5@106 MPH. It was a 6-speed and I raced without speed shifting. Yet the 1/4 mile time for my car on that list is 13.8. What makes even less sense is that the 1998 Trans Am which the same identical car to the Formula, except that it weighs MORE because of the gaudy "aero" crap has a 1/4 mile time listed of 13.4 -- almost a half second faster than the Formula! Don't think I'm flaming you Todd -- it is very interesting to look at the numbers and I appreciate you posting the link. It's just always been a pet peeve of mine when people say "My car runs the 1/4 in xx.x!" Oh really? Under what conditions and with who driving? :-) *-*-*-*-*-*-* Todd Walker http://twalker.d2g.com Canon Pro90IS: http://twalker.d2g.com/pro90/index.htm Pbase galleries: http://www.pbase.com/twalker294 *-*-*-*-*-*-*
I agree that 0-60's and 1/4-mi's are subject to a lot of variables. And people shouldn't read anything into 0.1- 0.4 sec differences (though they can vary more than that). But I still say a big "thanks" for posting the URL! I found it very interesting. For instance, look at the trends. "Sporty" cars in the mid-80's did 9-10+ sec 0-60's. Every review of a contemporary car today with that performance would warn that it was barely adequate at getting up to highway speed! I looked at the cars I was considering purchasing back in '84 (CRX, RX7, Rabbit GTI, Prelude). They are 0-60 in 9-10 sec. BTW, yes, the Lude is listed at 9.7. I remember that review. I also remember some that were 10.2-10.5!
Quoted text (13 lines)>Interesting information but not very reliable. How can anyone say >"This is THE 0-60 and 1/4 mile time for this car"? There are way too >many factors that govern the results, such as temperature, humidity, >barometric pressure, fuel quality, shift speed, etc. and so on. > >Don't think I'm flaming you Todd -- it is very interesting to look at >the numbers and I appreciate you posting the link. It's just always >been a pet peeve of mine when people say "My car runs the 1/4 in >xx.x!" Oh really? Under what conditions and with who driving? :-) > >
Good point, I can certainly understand that being a pet peeve :-) Many (most?) folks quoting times like that probably don't realize how true what you've just said is! Two identical cars from a dealership could have different times too, although I don't know how much they vary, my guess would be maybe a .1 second deviation in 0-60, maybe a tiny bit higher in the 1/4 mile, but I don't know that for sure. That depends mostly on how consistant the manufacturing process is, probably. I don't know if/which magazines "standardize" their acceleration times in these tests by correcting the numbers to "standard atmospheric conditions." There are a couple standards (I've heard of two or three in automotive stuff), the one I usually use is 60 degrees Fahrenheit, 29.92 inHG barometric pressure, and dry air (0% relative humidity). When comparing runs after modifying one particular car, it's a good idea to multiply the measured times by correction factors that take into account the real atmospheric conditions during the test, then "correct" them to the time you'd theoretically get at sea level under the temp, barometric pressure, and relative humidity "standards" above. This way, you can more or less eliminate the atmospheric effects (although that's not perfect, but can come pretty close, that's what dial-in setup software is for in drag racing.) I'm not saying anyone actually does this (especially not the folks you probably have in mind :0)), but it could be argued that there is a publishable "best time" for a car, I think. For instance, you could spend a year drag racing your car at different tracks (different altitudes) and in different weather conditions, record all those 1/4 mile times, then "correct" them to times in "standard" atmospheric conditions.. This isn't exact, but I think it usually falls within a few hundreths of a second. The point there is to find the absolute "best time" the car could achieve, so you could compare it to the "best time" of another car, and know who's gonna win if everybody drives perfectly... From those tests over the year, you could probably pick the best time and list it, which would probably be the run you made where the shifting was just right, the launch was just right, etc, so you could eliminate those variables too (more or less). The more tests you ran, the closer you would get to determining a "best time," unless you got lucky on your first try :0). You might have really run faster or slower than that in the real tests, but by correcting it all this way, you could probably arrive at a "best time" within a couple hundreths of a second. And with the time stated in "standard atmospheric conditions" (of which there are a couple definitions), you could find the new "best time" under a different weather condition if you wanted. Of course, if you need accuracy to the 1/100000th second, this point is moot... Correction factors aren't THAT good :0) This is one major purpose for 1/4 mile prediction software (and correction factors, density altitude calcs, etc.)... Once you show up at the track, you want to guess what your best time could be, then run as close to it as you can without going any quicker... The software or correction factor stuff is supposed to let you predict what the car will run in today's weather conditions, which you've never actually run in before, and hopefully get you within a few hundreths of a second or so, just a little closer than the guy without the program, so you win the prize $$ and write a thank you letter to the author :0) ... I don't know for sure how well my little proggie does this, so I don't mention that as a selling point on my website ;-) >Perfect example -- I used to have a 1998 Pontiac Formula. It was bone >stock except for a Flowmaster muffler. I ran a best 1/4 mile in that >car of 13.5@106 MPH. It was a 6-speed and I raced without speed >shifting. Yet the 1/4 mile time for my car on that list is 13.8. This isn't a fair comparison is it? You're comparing a Flowmaster equipped car with a stock car.... You ought to be a little faster than the quoted time. Nice car, BTW :0)
Quoted text (7 lines) >What >makes even less sense is that the 1998 Trans Am which the same >identical car to the Formula, except that it weighs MORE because of >the gaudy "aero" crap has a 1/4 mile time listed of 13.4 -- almost a >half second faster than the Formula! > >
Seems wierd to me too, but isn't the TA supposed to be faster than the Formula? Perhaps the 13.4 time had a different axle ratio, and/or the 13.8 Formula time was the best the test driver could do that day. Who knows, maybe the Formula guy only had 10 minutes to test the 1/4 mile time, and was just getting used to the car, while the TA driver had a couple hours to burn rubber and do better... That really backs up your point more than anything though. Aside from that, with a difference that big, I'd think there was something different between the two cars besides the faster car being heavier... Are they really identical in all other ways? Anyway, I agree that you might have to take the first quoted "best time" you see with a grain of salt, but expect that you could do at least that well, if not faster.. I'd personally stick with the fastest test done, as that's probably going to be closest to the real "best time", once corrected to standard atmospheric conditions (if they did that), the driver had enough time to get in the best run he could, etc... Of course, then you might change the oil and mess it all up a bit ;-) Good grief, this turned into a long post... Fun stuff to talk about. Todd Wasson --- Performance Simulations Drag Racing and Top Speed Prediction Software http://PerformanceSimulations.Com
[email hidden] (J. Todd Wasson) writes:
Quoted text (8 lines)> Good point, I can certainly understand that being a pet peeve :-) > Many (most?) folks quoting times like that probably don't realize how > true what you've just said is! Two identical cars from a dealership > could have different times too, although I don't know how much they > vary, my guess would be maybe a .1 second deviation in 0-60, maybe a > tiny bit higher in the 1/4 mile, but I don't know that for sure. That > depends mostly on how consistant the manufacturing process is, > probably.
..not to mention break-in. -- Gunnar #31 SUCKS#015 Tupperware MC#002 DoD#0x1B DoDRT#003 DoD:CT#4,8 Kibo�: 2 "a language is a dialect with an army and a navy"
Quoted text (14 lines)>> Good point, I can certainly understand that being a pet peeve :-) >> Many (most?) folks quoting times like that probably don't realize how >> true what you've just said is! Two identical cars from a dealership >> could have different times too, although I don't know how much they >> vary, my guess would be maybe a .1 second deviation in 0-60, maybe a >> tiny bit higher in the 1/4 mile, but I don't know that for sure. That >> depends mostly on how consistant the manufacturing process is, >> probably. > >..not to mention break-in. > > >-- >Gunnar
Oh yeah, I forgot about that entirely. I wonder how much influence that can have... Do you know? Todd Wasson --- Performance Simulations Drag Racing and Top Speed Prediction Software http://PerformanceSimulations.Com
[email hidden] (J. Todd Wasson) writes:
Quoted text (13 lines)> >> Good point, I can certainly understand that being a pet peeve :-) > >> Many (most?) folks quoting times like that probably don't realize how > >> true what you've just said is! Two identical cars from a dealership > >> could have different times too, although I don't know how much they > >> vary, my guess would be maybe a .1 second deviation in 0-60, maybe a > >> tiny bit higher in the 1/4 mile, but I don't know that for sure. That > >> depends mostly on how consistant the manufacturing process is, > >> probably. > > > >..not to mention break-in. > > Oh yeah, I forgot about that entirely. I wonder how much influence that can > have... Do you know?
not really. it _seems_ to be quite important for motorbikes, at least. I remember a Honda Fireblade model from a couple years back benching anything from 115 to 130 bhp after a few thousand kilometers, but this was for road-bikes, so there's no way (for me at least) to make any comment on break-in vs manufacturing sloppiness. in stock motorbike racing, where everybody break in their bikes in pretty much the same way (a few heat cycles, and full power), there doesn't seem to be any significant variation that cannot be attributed to tuning skills, but this is a highly unqualified observation, mind you. :) there _could_ be conclusive evidence out there, but I know I've never seen it, and I've been looking. -- Gunnar #31 SUCKS#015 Tupperware MC#002 DoD#0x1B DoDRT#003 DoD:CT#4,8 Kibo�: 2 "Det er nok ingen ovn, men fartsm�leren v�r."
Kind of makes you appreciate the '66 427 Shelby Cobra. 0 to 100 and back down to 0 in under 10 seconds. 0-60 3.4 seconds 1/4 mile 11.5 sec at 118mph Not bad for something designed 36 years ago ;) -- Slot Tweaks & Reviews www.slottweak.com "Nockston" <[email hidden]> wrote in message news:P6_W7.11902$[email hidden]... > 1995 Ferrari 333 SP 3.6 (0-60) 11.3 > (1/4 mile) > > Great Googily Moogily > > Was there some rocket accessory installed? > > :-) > >

Sponsors

Affiliate Links

Sim Gaming Expo MOZA Racing Sim-Lab Fanatec TrakRacer Asetek Internet Privacy From NordVPN Dreamhost Capital One Credit Card Application Fanatical CDKeys Amazon Amazon UK Project Motor Racing iRacing Get your racing gloves, boots and more from Demon Tweeks. Enlist at Roberts Space Industries, developers of Star Citizen and Squadron 42


Back from the ashes since July, 2019. First created in 2001 with the merger of Legends Central (founded 1999) and simracing.dk.

A site by a sort of sim racer, for sim racers, about racing sims. News and information on both modern and historic sim racing software titles.

All products and licenses property of their respective owners.


Facebook Threads Bluesky Twitter Mastodon Instagram YouTube Tiktok Twitch Reddit Google News Apple News Subscribe via WordPress Flipboard eBay

Race Sim Central © 1999-2026 | Some links pay RSC a commission. Advertising does not equal endorsement.Cookie Policy