I'm having a problem getting my setup to work with Racer. I
have a MS non-ff wheel, ActLab pedals, and USB GPL Shifter. Anyone
have a similar setup to mine and wouldn't mind sharing their control
set?
This is mine but it doesn't seem to work. My AL pedals are ID#1,
Shifter is ID#2, and wheel is ID#3 in the games control panel of
win98se.
misc
{
displayname=My Setup
}
controllers
{
; How many controllers to use from this list?
count=3
; Define all controllers
controller0
{
; Main controller
; Index in the list of game controllers
index=0
force_feedback=0
deadzone=0
}
// Other controllers you want to include
controller1
{
index=1
force_feedback=0
}
controller2
{
index=2
force_feedback=0
}
}
controls
{
; Vehicle control
steerleft
{
; Index intro controller list from above section (default is 0)
controller=2
axis=x
min=0
max=-1000
}
steerright
{
axis=x
min=0
max=1000
}
throttle
{
controller=0
axis=y
min=800
max=-800
}
brakes
{
; RvG, 8-8-01: the non-FF MSFF wheels seem
; to use axis Y, not RZ
;axis=rz
controller=0
axis=y
min=800
max=-800
}
shiftup
{
controller=2
button=7
}
shiftdown
{
controller=2
button=6
}
clutch
{
controller=0
axis=z
min=800
max=-800
negate=1
}
}
On Mon, 24 Dec 2001 15:47:39 -0800, [email hidden] wrote:
...
> ; How many controllers to use from this list?
> count=3...
> controller2
> {
> index=2
> force_feedback=0
> }...
Try adding controller=2 here as well. Or set controller0 to use index
2, so the default controller (#0) uses ID#3 (I start counting at 0, so
this is index=2).
For example:
> throttle
> {
> controller=0
Will use controller #0, which are the AL pedals in your case.
Hope this makes things a bit clearer, until a complete controller menu
can be built,
Ruud van Gaal
Free car sim : http://www.marketgraph.nl/gallery/racer/
Pencil art : http://www.marketgraph.nl/gallery/
Quoted text (8 lines)
> I'm having a problem getting my setup to work with Racer. I >have a MS non-ff wheel, ActLab pedals, and USB GPL Shifter. Anyone >have a similar setup to mine and wouldn't mind sharing their control >set? > >This is mine but it doesn't seem to work. My AL pedals are ID#1, >Shifter is ID#2, and wheel is ID#3 in the games control panel of >win98se.Quoted text (11 lines)
> ; Vehicle control > steerleft > { > ; Index intro controller list from above section (default is 0) > controller=2 > axis=x > min=0 > max=-1000 > } > steerright > {On Fri, 28 Dec 2001 20:30:47 GMT, [email hidden] (Ruud van Gaal)
wrote:
I got all my controllers working now. Thanks for the help.
Does Racer support free-shifting yet with all 6 gears and neutral?
The Actlabs shifting util doesn't have support for Racer in it's list.
I'm currently using sequential shifting by assigning button 2 and 3 on
the USB shifter for shiftup and shiftdown.
Here is my controlset just incase someone else needs it:
;
; Controls configuration
;
; Settings for a Microsoft(tm) Sidewinder Wheel (no force feedback)
; Probably works for a lot of other wheels as well.
; Note the wheel worked funny (axis didn't reach full extent)
; until I plugged in a joystick and a wheel back in, upon which
; a new driver seemed to be installed and made it all work better
; (this was under Windows2000, no service packs, DX7)
; Created by Ruud van Gaal, 15-12-00
;
misc
{
displayname=MS Precision Wheel, Act Labs Pedals, USB GPL Shifter
}
controllers
{
; How many controllers to use from this list?
count=3
; Define all controllers
controller0
{
; Act Labs Performance Pedals
; Index in the list of game controllers
index=0
force_feedback=0
deadzone=0
}
// Other controllers you want to include
controller1
{
; USB GPL Shifter
index=1
force_feedback=0
}
controller2
{
; Microsoft Precision Sidewinder Wheel
index=2
force_feedback=0
}
}
controls
{
; Vehicle control
steerleft
{
; Index intro controller list from above section (default is 0)
controller=2
axis=x
min=0
max=-1000
}
steerright
{
controller=2
axis=x
min=0
max=1000
}
throttle
{
controller=0
axis=rx
min=1000
max=-1000
}
brakes
{
controller=0
axis=ry
min=1000
max=-1000
}
shiftup
{
controller=1
button=2
}
shiftdown
{
controller=1
button=3
}
clutch
{
controller=0
axis=z
min=-1000
max=1000
negate=0
}
}
Quoted text (8 lines)
>Will use controller #0, which are the AL pedals in your case. > >Hope this makes things a bit clearer, until a complete controller menu >can be built, > >Ruud van Gaal >Free car sim : http://www.marketgraph.nl/gallery/racer/ >Pencil art : http://www.marketgraph.nl/gallery/On Fri, 28 Dec 2001 15:00:28 -0800, [email hidden] wrote:
>On Fri, 28 Dec 2001 20:30:47 GMT, [email hidden] (Ruud van Gaal)
>wrote:
>
>>Will use controller #0, which are the AL pedals in your case....
>I got all my controllers working now. Thanks for the help.
Good to hear. :)
>Does Racer support free-shifting yet with all 6 gears and neutral?
Not yet. I'm planning that for the next version (including the clutch
pedal).
Ruud van Gaal
Free car sim : http://www.marketgraph.nl/gallery/racer/
Pencil art : http://www.marketgraph.nl/gallery/
