DO NOT install the Sidewinder software on XP! It cause me all kinds of
problems and was a pain to uninstall. XP already has all the drivers you
need. Wheel works perfectly on CMR2 and F1CS2K and did not work perfectly
with the Sidewinder software installed.
--
- Dan
MS Force Feedback wheel drivers on Windows XP
Dan Dickerson warned against installing the Sidewinder software for his USB MS Force Feedback wheel on XP. Others reported it working fine when installed first without schemes, while the gameport version was not officially supported by Microsoft on XP. Split-axis pedal support remained unreliable, and Dan later found his brake pedal again had no modulation.
hardware: wheels/pedalstech support
Automated summary.
I found the opposite. The version 4.0 drivers work fine for me. MSFF USB
wheel and XP Pro.
James
"Dan Dickerson" <[email hidden]> wrote in message
news:PGK68.46024$[email hidden]...
Quoted text (14 lines)
> DO NOT install the Sidewinder software on XP! It cause me all kinds of > problems and was a pain to uninstall. XP already has all the drivers you > need. Wheel works perfectly on CMR2 and F1CS2K and did not work perfectly > with the Sidewinder software installed. > > -- > > > - Dan > > > > >Dan - is that gameport or USB ?
I have just had a new computer delivered with XP pre-installed.
I am expecting all sorts of problems with the gameport wheel.
Any experinces or tips ?
Thanks
"Dan Dickerson" <[email hidden]> wrote in message
news:PGK68.46024$[email hidden]...
> DO NOT install the Sidewinder software on XP! It cause me all kinds of
> problems and was a pain to uninstall. XP already has all the drivers you
> need. Wheel works perfectly on CMR2 and F1CS2K and did not work perfectly
> with the Sidewinder software installed.
>
This is the USB model you're talking about, right ?
"Dan Dickerson" <[email hidden]> wrote in message
news:PGK68.46024$[email hidden]...
> DO NOT install the Sidewinder software on XP! It cause me all kinds of
> problems and was a pain to uninstall. XP already has all the drivers you
> need. Wheel works perfectly on CMR2 and F1CS2K and did not work perfectly
> with the Sidewinder software installed.
>
Yea, that's what I do on XP too. But now I can't use split axis pedals.
"Karl Brankin" <[email hidden]> wrote in message
news:a3ggtq$u5i$[email hidden]...
Gameport version will NOT be supported by Microsoft. That's official. Complete bastards.
�129 down the tubes. It was old, I know. But I still prefer it even over my new USB MOMO
wheel.
Just like me, you will be getting a new wheel for your birthday !
Quoted text (9 lines)
> Dan - is that gameport or USB ? > > I have just had a new computer delivered with XP pre-installed. > > I am expecting all sorts of problems with the gameport wheel. > > Any experinces or tips ? > >Yeah guys, I'm using the USB wheel. And you're correct, there seems to not
be a way to use split pedals, but in CMR2 and F1CS2K that doesn't seem to
cause a problem.
--
- Dan
"Zardoz" <[email hidden]> wrote in message
news:8VP68.1239$[email hidden]...
>
> "Dan Dickerson" <[email hidden]> wrote in message
> news:PGK68.46024$[email hidden]...
> > DO NOT install the Sidewinder software on XP! It cause me all kinds of
> > problems and was a pain to uninstall. XP already has all the drivers
you
> > need. Wheel works perfectly on CMR2 and F1CS2K and did not work
perfectly
> > with the Sidewinder software installed.
> >
>
> Yea, that's what I do on XP too. But now I can't use split axis pedals.
>
>
Hmmm, I have XP Home and the Sidewinder 4.0 software for my MSFF USB wheel
and everything installed and it working just fine.
HH
"Dan Dickerson" <[email hidden]> wrote in message
news:URc78.48576$[email hidden]...
> Yeah guys, I'm using the USB wheel. And you're correct, there seems tonot
of
Quoted text (16 lines)
> be a way to use split pedals, but in CMR2 and F1CS2K that doesn't seem to > cause a problem. > > -- > > > - Dan > > > > "Zardoz" <[email hidden]> wrote in message > news:8VP68.1239$[email hidden]... > > > > "Dan Dickerson" <[email hidden]> wrote in message > > news:PGK68.46024$[email hidden]... > > > DO NOT install the Sidewinder software on XP! It cause me all kindsQuoted text (12 lines)
> > > problems and was a pain to uninstall. XP already has all the drivers > you > > > need. Wheel works perfectly on CMR2 and F1CS2K and did not work > perfectly > > > with the Sidewinder software installed. > > > > > > > Yea, that's what I do on XP too. But now I can't use split axis pedals. > > > > > >Very unusual. What operating system are you running, with what sims? Did
you install the software first, then plug in the USB? Can you describe
step-by-step how you got it running?
--
Chris H.
"HeadHunter" <[email hidden]> wrote in message
news:yBd78.13605$[email hidden]...
> Hmmm, I have XP Home and the Sidewinder 4.0 software for my MSFF USB wheel
> and everything installed and it working just fine.
>
> HH
>
> "Dan Dickerson" <[email hidden]> wrote in message
> news:URc78.48576$[email hidden]...
> > Yeah guys, I'm using the USB wheel. And you're correct, there seems to
> not
> > be a way to use split pedals, but in CMR2 and F1CS2K that doesn't seem
to
> > cause a problem.
> >
> > --
> >
> >
> > - Dan
> >
> >
> >
> > "Zardoz" <[email hidden]> wrote in message
> > news:8VP68.1239$[email hidden]...
> > >
> > > "Dan Dickerson" <[email hidden]> wrote in message
> > > news:PGK68.46024$[email hidden]...
> > > > DO NOT install the Sidewinder software on XP! It cause me all kinds
> of
> > > > problems and was a pain to uninstall. XP already has all the
drivers
> > you
> > > > need. Wheel works perfectly on CMR2 and F1CS2K and did not work
> > perfectly
> > > > with the Sidewinder software installed.
> > > >
> > >
> > > Yea, that's what I do on XP too. But now I can't use split axis
pedals.
> > >
> > >
> >
> >
>
>
>
"HeadHunter" <[email hidden]> wrote in message
news:yBd78.13605$[email hidden]...
> Hmmm, I have XP Home and the Sidewinder 4.0 software for my MSFF USB wheel
> and everything installed and it working just fine.
>
> HH
I tried the software on XP and first it complained that it wouldn't work and
although it worked some of the time it didn't all of the time. I would set
split axis and the games would not see it as split axis so i just
uninstalled the software. Having split axis is no big deal to me anyway.
Split axis is a must for any of the better driving sims like N4 or GPL.
--
Biz
"Don't touch that please, your primitive intellect wouldn't understand
alloys and compositions and,......things with molecular structures,....and
the....." - Ash
Zardoz <[email hidden]> wrote in message news:IRh78.1352$[email hidden]...
>
> "HeadHunter" <[email hidden]> wrote in message
> news:yBd78.13605$[email hidden]...
> > Hmmm, I have XP Home and the Sidewinder 4.0 software for my MSFF USB wheel
> > and everything installed and it working just fine.
> >
> > HH
>
> I tried the software on XP and first it complained that it wouldn't work and
> although it worked some of the time it didn't all of the time. I would set
> split axis and the games would not see it as split axis so i just
> uninstalled the software. Having split axis is no big deal to me anyway.
>
>
As stated, I am running WinXP Home and the Sidewinder 4.0 software that came
with my MSFF USB wheel. I use the wheel without problem in NASCAR4, NASCAR
Racing Season 2002 Demo, Grand Prix Legends, Sports Car GT and F1
Championship Season 2000.
I installed the software first. It gave me a "This program may not work with
Windows 2000" (or something similiar) message and asked if I wanted to
continue. I chose to continue, rebooted after installation, then plugged the
wheel in. No problems at all. It has been working flawlessly since.
HH
"Chris H." <[email hidden]> wrote in message
news:VVd78.186217$%[email hidden]...
wheel
to
kinds
Quoted text (9 lines)
> Very unusual. What operating system are you running, with what sims? Did > you install the software first, then plug in the USB? Can you describe > step-by-step how you got it running? > -- > Chris H. > > "HeadHunter" <[email hidden]> wrote in message > news:yBd78.13605$[email hidden]... > > Hmmm, I have XP Home and the Sidewinder 4.0 software for my MSFF USBQuoted text (7 lines)
> > and everything installed and it working just fine. > > > > HH > > > > "Dan Dickerson" <[email hidden]> wrote in message > > news:URc78.48576$[email hidden]... > > > Yeah guys, I'm using the USB wheel. And you're correct, there seemsQuoted text (18 lines)
> > not > > > be a way to use split pedals, but in CMR2 and F1CS2K that doesn't seem > to > > > cause a problem. > > > > > > -- > > > > > > > > > - Dan > > > > > > > > > > > > "Zardoz" <[email hidden]> wrote in message > > > news:8VP68.1239$[email hidden]... > > > > > > > > "Dan Dickerson" <[email hidden]> wrote in message > > > > news:PGK68.46024$[email hidden]... > > > > > DO NOT install the Sidewinder software on XP! It cause me allQuoted text (20 lines)
> > of > > > > > problems and was a pain to uninstall. XP already has all the > drivers > > > you > > > > > need. Wheel works perfectly on CMR2 and F1CS2K and did not work > > > perfectly > > > > > with the Sidewinder software installed. > > > > > > > > > > > > > Yea, that's what I do on XP too. But now I can't use split axis > pedals. > > > > > > > > > > > > > > > > > > > > > >What do people mean by "Split Axis"?
--
- Peter Ogden
Perth, Western Australia
"Biz" <[email hidden]> wrote in message
news:g8j78.9625$[email hidden]...
> Split axis is a must for any of the better driving sims like N4 or GPL.
>
> --
> Biz
"Peter Ogden" <[email hidden]> wrote in message
news:3c5e828a$0$[email hidden]...
> What do people mean by "Split Axis"?
> --
> - Peter Ogden
> Perth, Western Australia Split axis is used to refer to setups that have a separate input for both
your brake and your throttle. Think of a pair of pedals as a joystick.
WithOUT split axis you can push the joystick forware(throttle) but then you
cannot also pull back(push the brake pedal) at the same time. Split axis is
like having two separate joysticks, so that while you are appling forward
pressure theo the throttle joystick, you can, at the same time, apply
pressure to the brake joystick.
If you look at a calibration screen, a pedal set withOUT split axis will
only allow one motion at a time. If you press both pedals, they will cancel
each other out(so it's like totally lifting off the gas and brake even tho
you have both pedals depressed all the way) With split axis you can press
both pedals and they calibrate separately so you can have the gas fully
depressed and the brake just slightly down and neither will conflict with
the other.
Fast drivers use this, or so I'm told, to apply a tiny amount of throttle
while braking to help 'steady' the car. When I try it I just bury the nose
into the nearest fence.
dave henrie
"Biz" <[email hidden]> wrote in message
news:g8j78.9625$[email hidden]...
> Split axis is a must for any of the better driving sims like N4 or GPL.
Why? I press on the gas pedal and it moves forward, I press on the brake
pedal and it stops. Seems to work ok for me.
HH,
Do you ever detect a lack of modulation of the gas or brake pedals? That
was my problem, the gas was either full on or full off when running the
sidewinder 4.0 software. Also, do you use schemes (or profiles) in the
software or do you leave profiles disabled?
- Dan
"Dave Henrie" <[email hidden]> wrote in message
news:JKw78.18482$[email hidden]...
both
> your brake and your throttle. Think of a pair of pedals as a joystick.
> WithOUT split axis you can push the joystick forware(throttle) but thenyou
> cannot also pull back(push the brake pedal) at the same time. Split axisis
> like having two separate joysticks, so that while you are appling forward
> pressure theo the throttle joystick, you can, at the same time, apply
> pressure to the brake joystick.
> If you look at a calibration screen, a pedal set withOUT split axis will
> only allow one motion at a time. If you press both pedals, they willcancel
> each other out(so it's like totally lifting off the gas and brake even tho
> you have both pedals depressed all the way) With split axis you can press
> both pedals and they calibrate separately so you can have the gas fully
> depressed and the brake just slightly down and neither will conflict with
> the other.
> Fast drivers use this, or so I'm told, to apply a tiny amount ofthrottle
> while braking to help 'steady' the car. When I try it I just bury thenose
> into the nearest fence.
> dave henrie
>
>
Quoted text (7 lines)
> "Peter Ogden" <[email hidden]> wrote in message > news:3c5e828a$0$[email hidden]... > > What do people mean by "Split Axis"? > > -- > > - Peter Ogden > > Perth, Western Australia > Split axis is used to refer to setups that have a separate input forOK, here's and update. I followed HH's install steps and reinstalled the
sidewinder software. Everything seems to be working fine. This time, I did
NOT install the "schemes" which may have been the source of my original
problems (maybe?). Either that or the order in which the software is
installed and the game controller connected is critical. Thanks HH. Now I
can use separate pedal mode, although I doubt it will make me any faster!
--
- Dan
"Dan Dickerson" <[email hidden]> wrote in message
news:PGK68.46024$[email hidden]...
> DO NOT install the Sidewinder software on XP! It cause me all kinds of
> problems and was a pain to uninstall. XP already has all the drivers you
> need. Wheel works perfectly on CMR2 and F1CS2K and did not work perfectly
> with the Sidewinder software installed.
>
> --
>
>
> - Dan
>
>
>
>
>
OK, that is what I thought it meant - I was just confirming this. In that
case, the built-in WinXP Pro MSFF driver (at least in my case) ONLY provides
split-axis. I'm having no trouble at all playing GPL with my MSFF Wheel
under WinXP Pro - and this is an old gameport unit.
--
- Peter Ogden
Perth, Western Australia
"Dave Henrie" <[email hidden]> wrote in message
news:JKw78.18482$[email hidden]...
> Split axis is used to refer to setups that have a separate input for
both
> your brake and your throttle. Think of a pair of pedals as a joystick.
> WithOUT split axis you can push the joystick forware(throttle) but then
you
> cannot also pull back(push the brake pedal) at the same time. Split axis
is
> like having two separate joysticks, so that while you are appling forward
> pressure theo the throttle joystick, you can, at the same time, apply
> pressure to the brake joystick.
> If you look at a calibration screen, a pedal set withOUT split axis will
> only allow one motion at a time. If you press both pedals, they will
cancel
> each other out(so it's like totally lifting off the gas and brake even tho
> you have both pedals depressed all the way) With split axis you can press
> both pedals and they calibrate separately so you can have the gas fully
> depressed and the brake just slightly down and neither will conflict with
> the other.
> Fast drivers use this, or so I'm told, to apply a tiny amount of
throttle
> while braking to help 'steady' the car. When I try it I just bury the
nose
> into the nearest fence.
> dave henrie
>
>
Glad it's now working for you! I did install a few of the schemes but have
not used them. I have my own that I setup as default. All I have programmed
in is one button each for F11 and F12 (for use with N4 Assistant) and one
for "space". Other that that everything else on the wheel is programmed to
the defaults.
It probably was the order in which you installed/connected stuff. I've built
2 XP systems with the MSFF USB Wheel and both work fine. I did both the same
way, install software, reboot then connect wheel.
HH
"Dan Dickerson" <[email hidden]> wrote in message
news:%VK78.49602$[email hidden]...
> OK, here's and update. I followed HH's install steps and reinstalled the
> sidewinder software. Everything seems to be working fine. This time, Idid
> NOT install the "schemes" which may have been the source of my original
> problems (maybe?). Either that or the order in which the software is
> installed and the game controller connected is critical. Thanks HH. NowI
you
> > need. Wheel works perfectly on CMR2 and F1CS2K and did not workperfectly
Quoted text (13 lines)
> can use separate pedal mode, although I doubt it will make me any faster! > > -- > > > - Dan > > > > "Dan Dickerson" <[email hidden]> wrote in message > news:PGK68.46024$[email hidden]... > > DO NOT install the Sidewinder software on XP! It cause me all kinds of > > problems and was a pain to uninstall. XP already has all the driversQuoted text (13 lines)
> > with the Sidewinder software installed. > > > > -- > > > > > > - Dan > > > > > > > > > > > >Sure worked very simply here, too, HH. I'm running the GPL scheme without
any modification at the moment and coming within two or three seconds of my
best times on various tracks. Sure seems smooth now.
--
Chris H.
"HeadHunter" <[email hidden]> wrote in message
news:O4_78.19871$[email hidden]...
> Glad it's now working for you! I did install a few of the schemes but have
> not used them. I have my own that I setup as default. All I have
programmed
> in is one button each for F11 and F12 (for use with N4 Assistant) and one
> for "space". Other that that everything else on the wheel is programmed to
> the defaults.
>
> It probably was the order in which you installed/connected stuff. I've
built
> 2 XP systems with the MSFF USB Wheel and both work fine. I did both the
same
> way, install software, reboot then connect wheel.
>
> HH
>
>
> "Dan Dickerson" <[email hidden]> wrote in message
> news:%VK78.49602$[email hidden]...
> > OK, here's and update. I followed HH's install steps and reinstalled
the
> > sidewinder software. Everything seems to be working fine. This time, I
> did
> > NOT install the "schemes" which may have been the source of my original
> > problems (maybe?). Either that or the order in which the software is
> > installed and the game controller connected is critical. Thanks HH.
Now
> I
> > can use separate pedal mode, although I doubt it will make me any
faster!
> >
> > --
> >
> >
> > - Dan
> >
> >
> >
> > "Dan Dickerson" <[email hidden]> wrote in message
> > news:PGK68.46024$[email hidden]...
> > > DO NOT install the Sidewinder software on XP! It cause me all kinds
of
> > > problems and was a pain to uninstall. XP already has all the drivers
> you
> > > need. Wheel works perfectly on CMR2 and F1CS2K and did not work
> perfectly
> > > with the Sidewinder software installed.
> > >
> > > --
> > >
> > >
> > > - Dan
> > >
> > >
> > >
> > >
> > >
> >
> >
>
>
>
On Tue, 05 Feb 2002 23:41:34 GMT, "HeadHunter" <[email hidden]> wrote:
You sure it works all the time? Have you tried switching between split
axis and single axis? Why would MS say it is not compatible on their
website if it is?
Quoted text (11 lines)
>Glad it's now working for you! I did install a few of the schemes but have >not used them. I have my own that I setup as default. All I have programmed >in is one button each for F11 and F12 (for use with N4 Assistant) and one >for "space". Other that that everything else on the wheel is programmed to >the defaults. > >It probably was the order in which you installed/connected stuff. I've built >2 XP systems with the MSFF USB Wheel and both work fine. I did both the same >way, install software, reboot then connect wheel. > >HHI haven't rebooted since the software installation reboot, but have been in
and out of GPL a bunch of times today. I would imagine this might be where
some people are seeing the need to recalibrate in Control Panel/Game
Controllers after having shut down the computer for a while. Don't know
because this computer is rarely off, but when I reboot one of these days
I'll check it.
--
Chris H.
"Zardoz" <[email hidden]> wrote in message
news:[email hidden]...
> On Tue, 05 Feb 2002 23:41:34 GMT, "HeadHunter" <[email hidden]> wrote:
>
> >Glad it's now working for you! I did install a few of the schemes but
have
> >not used them. I have my own that I setup as default. All I have
programmed
> >in is one button each for F11 and F12 (for use with N4 Assistant) and one
> >for "space". Other that that everything else on the wheel is programmed
to
> >the defaults.
> >
> >It probably was the order in which you installed/connected stuff. I've
built
> >2 XP systems with the MSFF USB Wheel and both work fine. I did both the
same
> >way, install software, reboot then connect wheel.
> >
> >HH
>
> You sure it works all the time? Have you tried switching between split
> axis and single axis? Why would MS say it is not compatible on their
> website if it is?
>
Watch how the best do it on tv, they use both pedals at the same in many instances, the same as many
of us sim racers do. You can't use both pedals at the same time without split axis support.
--
Biz
"Don't touch that please, your primitive intellect wouldn't understand
alloys and compositions and,......things with molecular structures,....and
the....." - Ash
Zardoz <[email hidden]> wrote in message news:aoP78.1644$[email hidden]...
>
> "Biz" <[email hidden]> wrote in message
> news:g8j78.9625$[email hidden]...
> > Split axis is a must for any of the better driving sims like N4 or GPL.
>
> Why? I press on the gas pedal and it moves forward, I press on the brake
> pedal and it stops. Seems to work ok for me.
>
>
Well, it works everytime for me. I have not had a single problem with my MS
wheel in XP. Works flawlessly. I can't say about split/single axis as I have
no need for single axis at all, so haven't checked to see if it worked.
Why would MS say it is not compatible on their website if it is?
Well.... it's Microsoft, that's why! :)
HH
"Zardoz" <[email hidden]> wrote in message
news:[email hidden]...
>
> You sure it works all the time? Have you tried switching between split
> axis and single axis? Why would MS say it is not compatible on their
> website if it is?
I spoke too soon! All SEEMED to be working fine but, I went to the
controller calibration page of CMR2 where there is a bar graph which moves
relative to the motion of the game controllers. The throttle modulated
fine, but now the brakes do not modulate - they're either full on or full
off. Turning off the schemes also defaults back to combined pedal mode -
everything modulates well there, but if I enact the schemes to enable split
pedal axes, the brakes won't modulate.
--
- Dan
"HeadHunter" <[email hidden]> wrote in message
news:rN188.19314$[email hidden]...
> Well, it works everytime for me. I have not had a single problem with my
MS
> wheel in XP. Works flawlessly. I can't say about split/single axis as I
have
> no need for single axis at all, so haven't checked to see if it worked.
>
> Why would MS say it is not compatible on their website if it is?
>
> Well.... it's Microsoft, that's why! :)
>
> HH
>
> "Zardoz" <[email hidden]> wrote in message
> news:[email hidden]...
> >
> > You sure it works all the time? Have you tried switching between split
> > axis and single axis? Why would MS say it is not compatible on their
> > website if it is?
>
>
On Wed, 06 Feb 2002 03:53:59 GMT, "HeadHunter" <[email hidden]> wrote:
>Well, it works everytime for me. I have not had a single problem with my MS
>wheel in XP. Works flawlessly. I can't say about split/single axis as I have
>no need for single axis at all, so haven't checked to see if it worked.
Some games don't support split axis even if you have it set to split
axis. They use their own setup routine and ignore the windows
configuration.
On Wed, 06 Feb 2002 06:33:49 GMT, "Dan Dickerson" <[email hidden]>
wrote:
Ah-ha! Knew it. :-)


































