Hi Folks,
I have just got an older ActLabs wheel via ebay. I cant seem to get it to
work properly with F1 2001. The wheel works ok, with pretty good FF. The
accelerator works fine, with a fairly variable range. But the brakes, eeek!
I press the brake and I get hardly anything at all then about half way down
the travel I get FULL brakes. Anyone know whats going on? I have tried
several different sensitivity settings and nothing seems to work. As
always, it works perfectly in GPL (although I am not used to it at all yet).
Thanks for the help
Ash
http://www.siroccoracing.com
On Fri, 1 Mar 2002 15:09:51 -0000, "Ashley McConnell"
<[email hidden]> wrote:
I have the same problem Ash and no matter what I tried, I couldn't get
rid of the major deadzone. People with different wheels have this
problem (I with my Momo, DGF with his Guillemot, you with the ACT) so
I think we can state by now that it's a B-U-G in F1 2001.
The only solution is to set your pedals to single axis which sucks :-/
Andre
Quoted text (12 lines)
>Hi Folks, > >I have just got an older ActLabs wheel via ebay. I cant seem to get it to >work properly with F1 2001. The wheel works ok, with pretty good FF. The >accelerator works fine, with a fairly variable range. But the brakes, eeek! >I press the brake and I get hardly anything at all then about half way down >the travel I get FULL brakes. Anyone know whats going on? I have tried >several different sensitivity settings and nothing seems to work. As >always, it works perfectly in GPL (although I am not used to it at all yet). > >Thanks for the help >Ash
"Andre Warringa" <[email hidden]> wrote in message
news:[email hidden]...
> On Fri, 1 Mar 2002 15:09:51 -0000, "Ashley McConnell"
> <[email hidden]> wrote:
>
> >Hi Folks,
> >
> >I have just got an older ActLabs wheel via ebay. I cant seem to get itto
> >work properly with F1 2001. The wheel works ok, with pretty good FF.The
> >accelerator works fine, with a fairly variable range. But the brakes,eeek!
> >I press the brake and I get hardly anything at all then about half waydown
> >the travel I get FULL brakes. Anyone know whats going on? I have tried
> >several different sensitivity settings and nothing seems to work. As
> >always, it works perfectly in GPL (although I am not used to it at allyet).
Bah, it worked pretty well with my MSFF, I may try to put both on and
attempt that, Its a pity :(. I see there is a job at ISI going, perhaps
i'll apply and fix it myself :)
Ash
Quoted text (11 lines)
> > > >Thanks for the help > >Ash > > I have the same problem Ash and no matter what I tried, I couldn't get > rid of the major deadzone. People with different wheels have this > problem (I with my Momo, DGF with his Guillemot, you with the ACT) so > I think we can state by now that it's a B-U-G in F1 2001. > The only solution is to set your pedals to single axis which sucks :-/ > > AndreThanks Richard, I'll give it a go!
All the best,
Ash
http://www.siroccoracing.com
"Richard S Beckett" <[email hidden]> wrote in
message news:a5oa40$[email hidden]...
x-no-archive: yes
I'll repost this _again_ shall I? Doesen't anyone ever check the archives?
=-=-=-=-=-=-
I have an MSFF gameport version, but I'm sure this will work for any other
controllers with the same problem.
I have set the pedals to split axes, but then F1 2001 has a huge deadzone on
the pedals - the wheel is fine. The pedals don't do anything until they are
50% depressed.
Well, I say deadzone, but actually it's not. I used the deadzone tweaker and
it made no difference. Anyway, if it was a deadzone problem, why is the
wheel OK?
I ran DXTweak, and found that the pedals sit at a value of 63, and this
reduces to 0 as they are pressed.
After a bit of fiddling, I adjusted the centre value to be 62, and the
pedals now work perfectly over their entire range.
So, the rule seems to be: set the center value for each pedal to be one
value away from the value you get when the pedals are not pressed. I.e. if
the range is 0 -> 100, set the centre at 1, if it's 63 -> 0, set the centre
to 62.
=-=-=-=-=-=-
R.
Doesn't that tweak then apply to all controllers? I'm concerned that I
might mess up some of my flight sims by doing that.
"Richard S Beckett" <[email hidden]>
wrote in message news:a5oa40$[email hidden]...
x-no-archive: yes
I'll repost this _again_ shall I? Doesen't anyone ever check the
archives?
=-=-=-=-=-=-
I have an MSFF gameport version, but I'm sure this will work for any
other controllers with the same problem.
I have set the pedals to split axes, but then F1 2001 has a huge
deadzone on the pedals - the wheel is fine. The pedals don't do anything
until they are 50% depressed.
Well, I say deadzone, but actually it's not. I used the deadzone tweaker
and it made no difference. Anyway, if it was a deadzone problem, why is
the wheel OK?
I ran DXTweak, and found that the pedals sit at a value of 63, and this
reduces to 0 as they are pressed.
After a bit of fiddling, I adjusted the centre value to be 62, and the
pedals now work perfectly over their entire range.
So, the rule seems to be: set the center value for each pedal to be one
value away from the value you get when the pedals are not pressed. I.e.
if the range is 0 -> 100, set the centre at 1, if it's 63 -> 0, set the
centre to 62.
=-=-=-=-=-=-
R.
"Ashley McConnell" <[email hidden]> wrote in message
news:a5o7h7$pq6$[email hidden]...
>
> "Andre Warringa" <[email hidden]> wrote inmessage
get it
> to
> > >work properly with F1 2001. The wheel works ok, with pretty goodFF.
> The
> > >accelerator works fine, with a fairly variable range. But thebrakes,
> eeek!
> > >I press the brake and I get hardly anything at all then about halfway
> down
> > >the travel I get FULL brakes. Anyone know whats going on? I havetried
> > >several different sensitivity settings and nothing seems to work.As
> > >always, it works perfectly in GPL (although I am not used to it atall
> yet).
> > >
> > >Thanks for the help
> > >Ash
> >
> > I have the same problem Ash and no matter what I tried, I couldn'tget
> > rid of the major deadzone. People with different wheels have this
> > problem (I with my Momo, DGF with his Guillemot, you with the ACT)so
> > I think we can state by now that it's a B-U-G in F1 2001.
> > The only solution is to set your pedals to single axis which sucks:-/
> >
> > Andre
>
> Bah, it worked pretty well with my MSFF, I may try to put both on and
> attempt that, Its a pity :(. I see there is a job at ISI going,perhaps
> i'll apply and fix it myself :)
>
> Ash
>
>
Quoted text (7 lines)
> news:[email hidden]... > > On Fri, 1 Mar 2002 15:09:51 -0000, "Ashley McConnell" > > <[email hidden]> wrote: > > > > >Hi Folks, > > > > > >I have just got an older ActLabs wheel via ebay. I cant seem toOn Fri, 1 Mar 2002 18:43:46 -0500, "Haqsau" <[email hidden]>
wrote:
>Doesn't that tweak then apply to all controllers? I'm concerned that I
>might mess up some of my flight sims by doing that.
I'm affraid of that too :-/
Btw, I spoke to ashley tonight, and the dxtweak-tweak didn't work for
him :-/
Andre
"Andre Warringa" <[email hidden]> wrote in message
news:[email hidden]...
About that 50% thing: I have noticed that whenever I enter the game
controller settings (MOMO), both pedals are set at 50% in the graphical
display. But as soon as I touch the pedal, it snaps back to zero and you can
start calibrating (0%-100%). So maybe - if you're not doing that already -
you should calibrate everytime to shake off the '50%-bug'? (I always
calibrate after plugging in the wheel and a clean startup, and never had any
problems with the MOMO in WinXP)
Ice D


































