Race Sim Central
Rec.Autos.Simulators Archive

F12001 controller HELP!

9 posts by 6 people · 02 Mar 2002 00:30 UTC - 03 Mar 2002 20:05 UTC

Kendt Eklund 02 Mar 2002 00:30 UTC#132640
Just picked up F1-2001 today, mainly for the GT mod, but I thought I'd get it configured properly before I go changing anything. Installed the game, and the official patch. I'm using an AL Force RS as controller 0 for steering, with my TM Nascar pro pedals as controller 1, with split axis pedals. F12001 recognizes all my controller axes when I set them up (throttle joy 2 Y-, Brake joy 2 RZ+), but my brake is a toggle switch! No matter which way I adjust the axis sensitivity the brakes lock solid on the slightest touch. Is there a bug that prevents combining controllers? I've adjusted the ranges in DXtweak so that pedals output full range, and the centers are the unpressed levels. RC2000, NH, GPL, N4 are all OK with this setup. Thanks for any help! Kendt
Me too, even with the DXTweak trick :(. I resorted to using my MSFF pedals again. Ash "Kendt Eklund" <[email hidden]> wrote in message news:[email hidden]...
Quoted text (16 lines)> Just picked up F1-2001 today, mainly for the GT mod, but I thought I'd > get it configured properly before I go changing anything. > > Installed the game, and the official patch. > I'm using an AL Force RS as controller 0 for steering, with my TM > Nascar pro pedals as controller 1, with split axis pedals. F12001 > recognizes all my controller axes when I set them up (throttle joy 2 > Y-, Brake joy 2 RZ+), but my brake is a toggle switch! No matter > which way I adjust the axis sensitivity the brakes lock solid on the > slightest touch. Is there a bug that prevents combining controllers? > I've adjusted the ranges in DXtweak so that pedals output full range, > and the centers are the unpressed levels. RC2000, NH, GPL, N4 are all > OK with this setup. > > Thanks for any help! > Kendt
On 1 Mar 2002 16:30:52 -0800, [email hidden] (Kendt Eklund) wrote:
Quoted text (16 lines)>Just picked up F1-2001 today, mainly for the GT mod, but I thought I'd >get it configured properly before I go changing anything. > >Installed the game, and the official patch. >I'm using an AL Force RS as controller 0 for steering, with my TM >Nascar pro pedals as controller 1, with split axis pedals. F12001 >recognizes all my controller axes when I set them up (throttle joy 2 >Y-, Brake joy 2 RZ+), but my brake is a toggle switch! No matter >which way I adjust the axis sensitivity the brakes lock solid on the >slightest touch. Is there a bug that prevents combining controllers? >I've adjusted the ranges in DXtweak so that pedals output full range, >and the centers are the unpressed levels. RC2000, NH, GPL, N4 are all >OK with this setup. > >Thanks for any help! >Kendt
Try using combined pedals, instead of split axis....
"Ashley McConnell" <[email hidden]> wrote in message news:<w4Vf8.28706$jM1.243700@NewsReader>... > Me too, even with the DXTweak trick :(. I resorted to using my MSFF pedals > again. > > Ash I figured it out - with the help of the info from the folks with the 50% deadzone prob. Basically, F1-2001 brilliantly assumes that no input begins until the controller has hit its center-point according to DirectX, even with pedals on different axes (this is so f-ing stupid I can't stand it). So what you need to do is set the limits to compensate. In DXtweak set the values such that center value is equal to the "pedal-off" setting, with the lower limit just one off from this. You'll also have to set the upper limit as well to match your pedal output. In F12001, I think the standard 50% sensitivity is the desired value. Now F1-2001 will be nice and happy because it will think your pedal is already at the center when it is really off, and you should get the full range as well. Of course this hoses your settings in other games (why? because it makes no f-ing sense to set it this way!), so you'll have to mess with DxTweak every time you switch driving games. Anyone know if theres a prog to apply DX controller "presets"? I'm guessing I'm in for the same with Rally Trophy. DAMN IT DEVELOPERS, PICK UP A RECENT PAPY GAME AND COPY THIER CONTROLLER SETUP PROCEDURE!!!! This is so fundamental to user satisfaction, I can't believe they're letting this crap out the door. Scratch that - I can. More contempt for serious simmers "They're the only one's who'd mix controllers and use separate axis, and they're willing to go through the trouble to make it work, so let them work it out." My gaming PC's off so my video card and I can cool down before I mess with it again ;). Kendt
I set the axes to 100% sensitivity and they seem to work fine now "Kendt Eklund" <[email hidden]> wrote in message news:[email hidden]... > "Ashley McConnell" <[email hidden]> wrote in messagenews:<w4Vf8.28706$jM1.243700@NewsReader>... > > Me too, even with the DXTweak trick :(. I resorted to using my MSFFpedals
Quoted text (36 lines)> > again. > > > > Ash > > I figured it out - with the help of the info from the folks with the > 50% deadzone prob. > Basically, F1-2001 brilliantly assumes that no input begins until the > controller has hit its center-point according to DirectX, even with > pedals on different axes (this is so f-ing stupid I can't stand it). > So what you need to do is set the limits to compensate. In DXtweak > set the values such that center value is equal to the "pedal-off" > setting, with the lower limit just one off from this. You'll also > have to set the upper limit as well to match your pedal output. > In F12001, I think the standard 50% sensitivity is the desired value. > Now F1-2001 will be nice and happy because it will think your pedal is > already at the center when it is really off, and you should get the > full range as well. > Of course this hoses your settings in other games (why? because it > makes no f-ing sense to set it this way!), so you'll have to mess with > DxTweak every time you switch driving games. Anyone know if theres a > prog to apply DX controller "presets"? > I'm guessing I'm in for the same with Rally Trophy. > > DAMN IT DEVELOPERS, PICK UP A RECENT PAPY GAME AND COPY THIER > CONTROLLER SETUP PROCEDURE!!!! > > This is so fundamental to user satisfaction, I can't believe they're > letting this crap out the door. Scratch that - I can. More contempt > for serious simmers "They're the only one's who'd mix controllers and > use separate axis, and they're willing to go through the trouble to > make it work, so let them work it out." > > My gaming PC's off so my video card and I can cool down before I mess > with it again ;). > > Kendt
"artie beamer" <[email hidden]> wrote in message news:<cz_f8.35776$[email hidden]>... > I set the axes to 100% sensitivity and they seem to work fine now > Believe me I tried that! Even set it on Controller 1 in case F12001 was reading the wrong controller settings. I *just* picked it up last night, but I remember seeing a post that said 50% sens gives linear output - can anyone confirm this? Still wading through the forums for updates/tips. Thanks! Kendt
FireImp <[email hidden]> wrote in message news:<[email hidden]>... > Try using combined pedals, instead of split axis.... Ahh - just like the real F1 drivers ;). This, like a cockpit view, is one of the litmus tests (for me) for any driving game I might buy. If it has any sim aspirations it better behave like one ;). Midtown Madness I might accept it (and actually, MM supports split axis just fine!), but F1-2001. EA must have been all over ISI to meet the release deadline, again :(. Kendt
FWIW I spent a couple hours last night going back and forth between split axis (with dead spots) and combined axis (with full travel), back to back comparisons at the same track with the same vehicle. I also should note that I'm a left foot braker, so combined axis is really undesirable. What I found was that my best lap times did not differ very much, but that I was much more consistent using combined axis with left foot braking, even though that really shouldn't work. Right foot braking with combined axis was marginally slower due to the need to get off the gas a little earlier, but left foot braking with split axis actually caused longer pauses due to the dead spots, and also made it difficult to modulate the pedals smoothly, thus causing more spins and messing up my line even when I could keep it under control. With combined axis it was mostly just a matter of making sure I had my right foot all the way off the gas before applying full brakes, although a slight overlap didn't really hurt at all. In fact, there were times when I could have sworn that the drivers were smart enough to apply the brakes during the overlap, like they built some intelligence into the software to make an educated guess about what you really wanted when both pedals were applied. This was with a Logitech wheel BTW, and the latest Wingman drivers and profiler. Driving was so much smoother with combined, I won't go back to split axis until (unless?) I hear for certain that the bug has been fixed. Thankfully the profiler allows me to set combined axis only for that game while keeping split axis for all others. "Kendt Eklund" <[email hidden]> wrote in message news:[email hidden]... > FireImp <[email hidden]> wrote in messagenews:<[email hidden]>...
Quoted text (12 lines)> > Try using combined pedals, instead of split axis.... > > Ahh - just like the real F1 drivers ;). > > This, like a cockpit view, is one of the litmus tests (for me) for any > driving game I might buy. If it has any sim aspirations it better > behave like one ;). > Midtown Madness I might accept it (and actually, MM supports split > axis just fine!), but F1-2001. EA must have been all over ISI to meet > the release deadline, again :(. > > Kendt
Same exact results for me. Left foot braking with single axis is much, much better than combined axis with the dead zone. Like you said, I've just been making sure to lift off the gas before using the brake. The short travel of the gas pedal in split axis was kind of like a forced course in delicate throttle control, but I'm glad it's over with now. David G Fisher "Haqsau" <[email hidden]> wrote in message news:a5tr0c$a3iop$[email hidden]...
Quoted text (44 lines)> FWIW I spent a couple hours last night going back and forth between > split axis (with dead spots) and combined axis (with full travel), back > to back comparisons at the same track with the same vehicle. I also > should note that I'm a left foot braker, so combined axis is really > undesirable. What I found was that my best lap times did not differ > very much, but that I was much more consistent using combined axis with > left foot braking, even though that really shouldn't work. Right foot > braking with combined axis was marginally slower due to the need to get > off the gas a little earlier, but left foot braking with split axis > actually caused longer pauses due to the dead spots, and also made it > difficult to modulate the pedals smoothly, thus causing more spins and > messing up my line even when I could keep it under control. With > combined axis it was mostly just a matter of making sure I had my right > foot all the way off the gas before applying full brakes, although a > slight overlap didn't really hurt at all. In fact, there were times > when I could have sworn that the drivers were smart enough to apply the > brakes during the overlap, like they built some intelligence into the > software to make an educated guess about what you really wanted when > both pedals were applied. This was with a Logitech wheel BTW, and the > latest Wingman drivers and profiler. Driving was so much smoother with > combined, I won't go back to split axis until (unless?) I hear for > certain that the bug has been fixed. Thankfully the profiler allows me > to set combined axis only for that game while keeping split axis for all > others. > > > "Kendt Eklund" <[email hidden]> wrote in message > news:[email hidden]... > > FireImp <[email hidden]> wrote in message > news:<[email hidden]>... > > > Try using combined pedals, instead of split axis.... > > > > Ahh - just like the real F1 drivers ;). > > > > This, like a cockpit view, is one of the litmus tests (for me) for any > > driving game I might buy. If it has any sim aspirations it better > > behave like one ;). > > Midtown Madness I might accept it (and actually, MM supports split > > axis just fine!), but F1-2001. EA must have been all over ISI to meet > > the release deadline, again :(. > > > > Kendt > >

Sponsors

Affiliate Links

Sim Gaming Expo MOZA Racing Sim-Lab Fanatec TrakRacer Asetek Internet Privacy From NordVPN Dreamhost Capital One Credit Card Application Fanatical CDKeys Amazon Amazon UK Project Motor Racing iRacing Get your racing gloves, boots and more from Demon Tweeks. Enlist at Roberts Space Industries, developers of Star Citizen and Squadron 42


Back from the ashes since July, 2019. First created in 2001 with the merger of Legends Central (founded 1999) and simracing.dk.

A site by a sort of sim racer, for sim racers, about racing sims. News and information on both modern and historic sim racing software titles.

All products and licenses property of their respective owners.


Facebook Threads Bluesky Twitter Mastodon Instagram YouTube Tiktok Twitch Reddit Google News Apple News Subscribe via WordPress Flipboard eBay

Race Sim Central © 1999-2026 | Some links pay RSC a commission. Advertising does not equal endorsement.Cookie Policy