Rally Throphy and TSW

Just kinda wondering if anyone has made a TSW STock work in split axis with Rally Throphy. Its works great in combined, but split axis the brake pedal is being read wrong by the game. -- David Robinson If autocrossing was easier it would be called road racing.

Same problem here with TSW2 Modified. "DAVID J ROBINSON" <robinsonspamfamily@prodig.> wrote in message news:CUzh8.22719$[email hidden]... > Just kinda wondering if anyone has made a TSW STock work in split axiswith > Rally Throphy. Its works great in combined, but split axis the brakepedal

Quoted text (8 lines)

> is being read wrong by the game. > > -- > David Robinson > > If autocrossing was easier it would be called road racing. > >

i have a ms precision (non-FF) wheel and my throttle was maxed all the time. this fixed it: go into the in-game controller properties. choose "accelerate + brake" for the accelerator and leave the brake pedal as it is. as always, results vary. hope this helps. kelley "DAVID J ROBINSON" <robinsonspamfamily@prodig.> wrote in message news:CUzh8.22719$[email hidden]... > Just kinda wondering if anyone has made a TSW STock work in split axiswith > Rally Throphy. Its works great in combined, but split axis the brakepedal

Quoted text (8 lines)

> is being read wrong by the game. > > -- > David Robinson > > If autocrossing was easier it would be called road racing. > >

"bagels'n'brew" <[email hidden]> wrote in message news:%UAh8.109$[email hidden]... > i have a ms precision (non-FF) wheel and my throttle was maxed all thetime. > this fixed it: > > go into the in-game controller properties. choose "accelerate + brake"for > the accelerator and leave the brake pedal as it is. as always, results > vary. hope this helps. > > kelley That is setting the pedals up as a single axis correct? That is what the others are trying NOT to do... dave henrie

Guys, I had the exact same problem. I'm using an LWFF in USB on ID#1 and a stock TSW (with split-axis) in the game port on ID#3. (Along with a GPL USB Shifter in ID#2 -- which works great with Rally Trophy BTW). But, I digress......I also absolutely could not get the pedals to work properly, until I did the following: a. Download/Install the latest patch (www.rallytrophy.com) , then b. Do This: Find the line in input.ini that reads: # (often brake) AnalogYAxisRange = { 100, -100}; and change it thus: # (often brake) AnalogYAxisRange = { -100, 0}; Then find this line: OverrideRanges = 0; and change it to: OverrideRanges = 1; It worked like a charm on my system. If you find eith the throttle or pedal to not respond liie you like, play with the values on these lines. Just keep a positive value positive and a negative value negative. BTW, I must give credit where credit is due. I got this fix from Gerry Aitkin. Many thanks again to Gerry, as he was the only person who could come up with a solution. Good Luck..... Hope this helps. Bert DAVID J ROBINSON wrote:

Quoted text (8 lines)

> Just kinda wondering if anyone has made a TSW STock work in split axis with > Rally Throphy. Its works great in combined, but split axis the brake pedal > is being read wrong by the game. > > -- > David Robinson > > If autocrossing was easier it would be called road racing.

Quoted text (7 lines)

> > go into the in-game controller properties. choose "accelerate + brake" > for > > the accelerator and leave the brake pedal as it is. as always, results > > vary. hope this helps. > > > > kelley > That is setting the pedals up as a single axis correct? That is what

the > others are trying NOT to do... > dave henrie i seem to be able to left foot brake my way around the track. i have my sidewinder software set up for dual axis and the in-game controller set to what appears to be single axis, but, for me anyway, i still get dual axis results. i can powerbrake the hell out of my opel with no problem this very well could be wishful thinking, but worth a try. see, not as smart as you think, eh dave!! just kidding.

BRH wrote:

Quoted text (38 lines)

> > Guys, > > I had the exact same problem. I'm using an LWFF in USB on ID#1 and a stock TSW > (with split-axis) in the game port on ID#3. (Along with a GPL USB Shifter in > ID#2 -- which works great with Rally Trophy BTW). > > But, I digress......I also absolutely could not get the pedals to work > properly, until I did the following: > > a. Download/Install the latest patch (www.rallytrophy.com) , then > b. Do This: > > Find the line in input.ini that reads: > > # (often brake) > AnalogYAxisRange = { 100, -100}; > > and change it thus: > > # (often brake) > AnalogYAxisRange = { -100, 0}; > > Then find this line: > > OverrideRanges = 0; > > and change it to: > > OverrideRanges = 1; > > It worked like a charm on my system. If you find eith the throttle or pedal to > not respond liie you like, play with the values on these lines. Just keep a > positive value positive and a negative value negative. > > BTW, I must give credit where credit is due. I got this fix from Gerry > Aitkin. Many thanks again to Gerry, as he was the only person who could come > up with a solution.

My pleasure, mate. BTW, did you get your shifter working with N2k2? Gerry