Hi there,
I have just installed the UK version of N2002 and although all the controls
seem to work OK, I can't seem to get any forcefeedback.
There is no feel when I'm on the track and the 3 sliders in options don't
move at all.
I'm using a Act Labs wheel, Performance Pedals and the Shifter with M$ ME
Everything worked OK in N4 and works OK in GPL
Any ideas
Cheers Lee
If you have steering assistance enabled, force-feedback will
automatically be disabled.
- Eric
"lee.ward1" <[email hidden]> wrote in message
news:Rj3n8.4495$[email hidden]...
> I have just installed the UK version of N2002 and although all thecontrols
> seem to work OK, I can't seem to get any forcefeedback.
>
> There is no feel when I'm on the track and the 3 sliders in optionsdon't
> move at all.
I've just checked and I'm not using steering assistance. Also I've just
noticed there actually is anything to slide in the forcefeed back sliders.
Not like there is in the steering linearity slider.
;-(
"Eric Busch" <[email hidden]> wrote in message
news:a7ifng$67r$[email hidden]...
Quoted text (17 lines)
> If you have steering assistance enabled, force-feedback will > automatically be disabled. > > - Eric > > > "lee.ward1" <[email hidden]> wrote in message > news:Rj3n8.4495$[email hidden]... > > I have just installed the UK version of N2002 and although all the > controls > > seem to work OK, I can't seem to get any forcefeedback. > > > > There is no feel when I'm on the track and the 3 sliders in options > don't > > move at all. > >It's alright.... I am a complete DUMMY. I've just found the tick box to turn
FF on.......DOH!
Apologies to everyone.
I'll say it again.."I'M A DUMMY"
"Tim Ferrell" <[email hidden]> wrote in message
news:nB3n8.182596$[email hidden]...
>
> "lee.ward1" <[email hidden]> wrote in message
> news:Rj3n8.4495$[email hidden]...
> I have a similar problem. FF doesn't not work at all until I go to the
> Options menu, chose Generic driver which then takes me to the calibration
> page ( in which I have no input). I then exit and go to the Optimizeddriver
> button, and repeat the process. I have to go through this process forevery
> track the I go to, regardless whether it's in the same session. This is
> quite annoying but it is the only way I've found FF to work.
> I had to go through this in N4 also.
> Tim
>
>
"lee.ward1" <[email hidden]> wrote in message
news:Rj3n8.4495$[email hidden]...
I have a similar problem. FF doesn't not work at all until I go to the
Options menu, chose Generic driver which then takes me to the calibration
page ( in which I have no input). I then exit and go to the Optimized driver
button, and repeat the process. I have to go through this process for every
track the I go to, regardless whether it's in the same session. This is
quite annoying but it is the only way I've found FF to work.
I had to go through this in N4 also.
Tim
>"Eric Busch" <[email hidden]> wrote
> If you have steering assistance enabled, force-feedback will
> automatically be disabled.
Thanks Eric I did not know that. I was helping somebody doing some laps
with the FF on and I noticed there was no force-feedback when I turned the
helps at <on>. I was wondering if it was a bug, even if the logic made
sense to disable it.
--
-- Fran�ois M�nard <ymenard>
-- http://www.ymenard.8m.com/
-- This announcement is brought to you by the Shimato Dominguez
Corporation - helping America into the New World...


































