Race Sim Central
Rec.Autos.Simulators Archive

Re: TOCA ProDriver - Crash on install

17 posts by 7 people · 02 May 2002 02:08 UTC - 05 May 2002 03:32 UTC

Doug D 02 May 2002 02:08 UTC#122530
Same here. :( Solid system, everything up to date, no problems w/ anything else. ERROR Doug D "Tony Gaylord" <[email hidden]> wrote in message news:741A8.7065$[email hidden]... > Folks, whats happening here?! :) Not patting my own back here or bragging > but my system is solid as a rock and have had only 1 title over a year ago > give me headaches on install. When I launch, I get the dreaded InvalidPage
Quoted text (31 lines)> Fault - error PRD.EXE. > > ok fine, I go into setup, get a page fault there too. Like I said, > everything (drivers etc) are very much up to date and installed correctly. > For sh*ts and giggles, I un-installed, D/L from (2) different mirrors and > each time, same invalid page fault's. > Latest Det drivers, current DX8 yadda, yadda, yadda.... :) > > Anyone else? Any fixes here? > 130mph, 6 speed rocket :) > > Tony Gaylord > > -- > _ _ _ _ _ _ _ _ _ _ _ _ _ > Tony Gaylord - Vancouver, WA *USA* > > http://y42.photos.yahoo.com/teampaultracy - Personal/Karting Pics > http://www.NationalKarting.com > http://www.ShifterSafetygear.com > http://www.SharkShifter.com > http://www.PatsAcres.com > http://www.RSwyers.com/ Bro's site > http://www.EKartingnews.com > http://www.CART.com > `�.��.���`�.��.���`�.��.�><((((�>���`�.��.�><((((�> > ���`�.��.�><((((�>�`�.��.���`�.��.�><((((�> > > > >
Haqsau 02 May 2002 02:53 UTC↳ reply to Doug D#122537
Just a wild guess here, but are you running any firewalling software? Because the first time I ran PRD, my firewall came up and said PRD was trying to send out a broadcast packet. I had to allow that and then a response on a different port before it worked properly. I'm using Kerio Personal Firewall, if you are using something else like Black Ice or ZoneAlarm it is possible that you are getting a page fault when it tries to interrupt PRD. "Doug D" <[email hidden]> wrote in message news:xc1A8.89145$[email hidden]... > Same here. :( Solid system, everything up to date, no problems w/anything > else. ERROR > Doug D > "Tony Gaylord" <[email hidden]> wrote in message > news:741A8.7065$[email hidden]... > > Folks, whats happening here?! :) Not patting my own back here orbragging > > but my system is solid as a rock and have had only 1 title over ayear ago > > give me headaches on install. When I launch, I get the dreadedInvalid > Page > > Fault - error PRD.EXE. > > > > ok fine, I go into setup, get a page fault there too. Like I said, > > everything (drivers etc) are very much up to date and installedcorrectly. > > For sh*ts and giggles, I un-installed, D/L from (2) differentmirrors and
Quoted text (28 lines)> > each time, same invalid page fault's. > > Latest Det drivers, current DX8 yadda, yadda, yadda.... :) > > > > Anyone else? Any fixes here? > > 130mph, 6 speed rocket :) > > > > Tony Gaylord > > > > -- > > _ _ _ _ _ _ _ _ _ _ _ _ _ > > Tony Gaylord - Vancouver, WA *USA* > > > > http://y42.photos.yahoo.com/teampaultracy - Personal/Karting Pics > > http://www.NationalKarting.com > > http://www.ShifterSafetygear.com > > http://www.SharkShifter.com > > http://www.PatsAcres.com > > http://www.RSwyers.com/ Bro's site > > http://www.EKartingnews.com > > http://www.CART.com > > `�.��.���`�.��.���`�.��.�><((((�>���`�.��.�><((((�> > > ���`�.��.�><((((�>�`�.��.���`�.��.�><((((�> > > > > > > > > > >
Doug D 02 May 2002 02:56 UTC↳ reply to Haqsau#122538
Never mind. Worked after reboot. It really bites. Waste of time. Doug D "Haqsau" <[email hidden]> wrote in message news:aaq9mp$cm6qr$[email hidden]...
Quoted text (60 lines)> Just a wild guess here, but are you running any firewalling software? > Because the first time I ran PRD, my firewall came up and said PRD was > trying to send out a broadcast packet. I had to allow that and then a > response on a different port before it worked properly. I'm using Kerio > Personal Firewall, if you are using something else like Black Ice or > ZoneAlarm it is possible that you are getting a page fault when it tries > to interrupt PRD. > > > "Doug D" <[email hidden]> wrote in message > news:xc1A8.89145$[email hidden]... > > Same here. :( Solid system, everything up to date, no problems w/ > anything > > else. ERROR > > Doug D > > "Tony Gaylord" <[email hidden]> wrote in message > > news:741A8.7065$[email hidden]... > > > Folks, whats happening here?! :) Not patting my own back here or > bragging > > > but my system is solid as a rock and have had only 1 title over a > year ago > > > give me headaches on install. When I launch, I get the dreaded > Invalid > > Page > > > Fault - error PRD.EXE. > > > > > > ok fine, I go into setup, get a page fault there too. Like I said, > > > everything (drivers etc) are very much up to date and installed > correctly. > > > For sh*ts and giggles, I un-installed, D/L from (2) different > mirrors and > > > each time, same invalid page fault's. > > > Latest Det drivers, current DX8 yadda, yadda, yadda.... :) > > > > > > Anyone else? Any fixes here? > > > 130mph, 6 speed rocket :) > > > > > > Tony Gaylord > > > > > > -- > > > _ _ _ _ _ _ _ _ _ _ _ _ _ > > > Tony Gaylord - Vancouver, WA *USA* > > > > > > http://y42.photos.yahoo.com/teampaultracy - Personal/Karting Pics > > > http://www.NationalKarting.com > > > http://www.ShifterSafetygear.com > > > http://www.SharkShifter.com > > > http://www.PatsAcres.com > > > http://www.RSwyers.com/ Bro's site > > > http://www.EKartingnews.com > > > http://www.CART.com > > > `�.��.���`�.��.���`�.��.�><((((�>���`�.��.�><((((�> > > > ���`�.��.�><((((�>�`�.��.���`�.��.�><((((�> > > > > > > > > > > > > > > > > >
Now remember, like its been mentioned, it runs at DEFAULT at an insanely high resolution. 1200x1600 I think. Back it down to 1024 or (EECCKKK!) 800 and see if its any better. I sure hope to hear that it is..... TG -- _ _ _ _ _ _ _ _ _ _ _ _ _ Tony Gaylord - Vancouver, WA *USA* http://y42.photos.yahoo.com/teampaultracy - Personal/Karting Pics http://www.NationalKarting.com http://www.ShifterSafetygear.com http://www.SharkShifter.com http://www.PatsAcres.com http://www.RSwyers.com/ Bro's site http://www.EKartingnews.com http://www.CART.com `�.��.���`�.��.���`�.��.�><((((�>���`�.��.�><((((�> ���`�.��.�><((((�>�`�.��.���`�.��.�><((((�> "Doug D" <[email hidden]> wrote in message news:lV1A8.89964$[email hidden]... > Never mind. Worked after reboot. It really bites. Waste of time. > Doug D > "Haqsau" <[email hidden]> wrote in message > news:aaq9mp$cm6qr$[email hidden]... > > Just a wild guess here, but are you running any firewalling software? > > Because the first time I ran PRD, my firewall came up and said PRD was > > trying to send out a broadcast packet. I had to allow that and then a > > response on a different port before it worked properly. I'm using Kerio > > Personal Firewall, if you are using something else like Black Ice or > > ZoneAlarm it is possible that you are getting a page fault when it tries > > to interrupt PRD. > > > > > > "Doug D" <[email hidden]> wrote in message > > news:xc1A8.89145$[email hidden]... > > > Same here. :( Solid system, everything up to date, no problems w/ > > anything > > > else. ERROR > > > Doug D > > > "Tony Gaylord" <[email hidden]> wrote in message > > > news:741A8.7065$[email hidden]... > > > > Folks, whats happening here?! :) Not patting my own back here or > > bragging > > > > but my system is solid as a rock and have had only 1 title over a > > year ago > > > > give me headaches on install. When I launch, I get the dreaded > > Invalid > > > Page > > > > Fault - error PRD.EXE. > > > > > > > > ok fine, I go into setup, get a page fault there too. Like I said, > > > > everything (drivers etc) are very much up to date and installed > > correctly. > > > > For sh*ts and giggles, I un-installed, D/L from (2) different > > mirrors and > > > > each time, same invalid page fault's. > > > > Latest Det drivers, current DX8 yadda, yadda, yadda.... :) > > > > > > > > Anyone else? Any fixes here? > > > > 130mph, 6 speed rocket :) > > > > > > > > Tony Gaylord > > > > > > > > -- > > > > _ _ _ _ _ _ _ _ _ _ _ _ _ > > > > Tony Gaylord - Vancouver, WA *USA* > > > > > > > > http://y42.photos.yahoo.com/teampaultracy - Personal/Karting Pics > > > > http://www.NationalKarting.com > > > > http://www.ShifterSafetygear.com > > > > http://www.SharkShifter.com > > > > http://www.PatsAcres.com > > > > http://www.RSwyers.com/ Bro's site > > > > http://www.EKartingnews.com > > > > http://www.CART.com > > > > `�.��.���`�.��.���`�.��.�><((((�>���`�.��.�><((((�> > > > > ���`�.��.�><((((�>�`�.��.���`�.��.�><((((�> > > > > > > > > > > > > > > > > > > > > > > > > > >
NOPE, just removed everything from the background with exception of WIN98 needed 'Explorer' and Startup. After clicking the PRD, I get the PRD page fault Fuck it. -- _ _ _ _ _ _ _ _ _ _ _ _ _ Tony Gaylord - Vancouver, WA *USA* http://y42.photos.yahoo.com/teampaultracy - Personal/Karting Pics http://www.NationalKarting.com http://www.ShifterSafetygear.com http://www.SharkShifter.com http://www.PatsAcres.com http://www.RSwyers.com/ Bro's site http://www.EKartingnews.com http://www.CART.com `�.��.���`�.��.���`�.��.�><((((�>���`�.��.�><((((�> ���`�.��.�><((((�>�`�.��.���`�.��.�><((((�> "Doug D" <[email hidden]> wrote in message news:lV1A8.89964$[email hidden]... > Never mind. Worked after reboot. It really bites. Waste of time. > Doug D > "Haqsau" <[email hidden]> wrote in message > news:aaq9mp$cm6qr$[email hidden]... > > Just a wild guess here, but are you running any firewalling software? > > Because the first time I ran PRD, my firewall came up and said PRD was > > trying to send out a broadcast packet. I had to allow that and then a > > response on a different port before it worked properly. I'm using Kerio > > Personal Firewall, if you are using something else like Black Ice or > > ZoneAlarm it is possible that you are getting a page fault when it tries > > to interrupt PRD. > > > > > > "Doug D" <[email hidden]> wrote in message > > news:xc1A8.89145$[email hidden]... > > > Same here. :( Solid system, everything up to date, no problems w/ > > anything > > > else. ERROR > > > Doug D > > > "Tony Gaylord" <[email hidden]> wrote in message > > > news:741A8.7065$[email hidden]... > > > > Folks, whats happening here?! :) Not patting my own back here or > > bragging > > > > but my system is solid as a rock and have had only 1 title over a > > year ago > > > > give me headaches on install. When I launch, I get the dreaded > > Invalid > > > Page > > > > Fault - error PRD.EXE. > > > > > > > > ok fine, I go into setup, get a page fault there too. Like I said, > > > > everything (drivers etc) are very much up to date and installed > > correctly. > > > > For sh*ts and giggles, I un-installed, D/L from (2) different > > mirrors and > > > > each time, same invalid page fault's. > > > > Latest Det drivers, current DX8 yadda, yadda, yadda.... :) > > > > > > > > Anyone else? Any fixes here? > > > > 130mph, 6 speed rocket :) > > > > > > > > Tony Gaylord > > > > > > > > -- > > > > _ _ _ _ _ _ _ _ _ _ _ _ _ > > > > Tony Gaylord - Vancouver, WA *USA* > > > > > > > > http://y42.photos.yahoo.com/teampaultracy - Personal/Karting Pics > > > > http://www.NationalKarting.com > > > > http://www.ShifterSafetygear.com > > > > http://www.SharkShifter.com > > > > http://www.PatsAcres.com > > > > http://www.RSwyers.com/ Bro's site > > > > http://www.EKartingnews.com > > > > http://www.CART.com > > > > `�.��.���`�.��.���`�.��.�><((((�>���`�.��.�><((((�> > > > > ���`�.��.�><((((�>�`�.��.���`�.��.�><((((�> > > > > > > > > > > > > > > > > > > > > > > > > > >
spazz 02 May 2002 09:07 UTC#122364
On Thu, 02 May 2002 01:59:31 GMT, "Tony Gaylord" <[email hidden]> wrote: Tony, please don't attach binaries in this newsgroup. Thanks.
Quoted text (15 lines)>Folks, whats happening here?! :) Not patting my own back here or bragging >but my system is solid as a rock and have had only 1 title over a year ago >give me headaches on install. When I launch, I get the dreaded Invalid Page >Fault - error PRD.EXE. > >ok fine, I go into setup, get a page fault there too. Like I said, >everything (drivers etc) are very much up to date and installed correctly. >For sh*ts and giggles, I un-installed, D/L from (2) different mirrors and >each time, same invalid page fault's. >Latest Det drivers, current DX8 yadda, yadda, yadda.... :) > >Anyone else? Any fixes here? >130mph, 6 speed rocket :) > >Tony Gaylord
M. Main 02 May 2002 11:37 UTC#122376
and the point behind the 115kb photograph of something not even pertaining to the subject is what?! do not attach meaningless BS. I thought perhaps it was a screenshot of the error, but no, its nothing but a waste. "Tony Gaylord" <[email hidden]> wrote in message news:741A8.7065$[email hidden]... > Folks, whats happening here?! :) Not patting my own back here or bragging > but my system is solid as a rock and have had only 1 title over a year ago > give me headaches on install. When I launch, I get the dreaded InvalidPage
Quoted text (31 lines)> Fault - error PRD.EXE. > > ok fine, I go into setup, get a page fault there too. Like I said, > everything (drivers etc) are very much up to date and installed correctly. > For sh*ts and giggles, I un-installed, D/L from (2) different mirrors and > each time, same invalid page fault's. > Latest Det drivers, current DX8 yadda, yadda, yadda.... :) > > Anyone else? Any fixes here? > 130mph, 6 speed rocket :) > > Tony Gaylord > > -- > _ _ _ _ _ _ _ _ _ _ _ _ _ > Tony Gaylord - Vancouver, WA *USA* > > http://y42.photos.yahoo.com/teampaultracy - Personal/Karting Pics > http://www.NationalKarting.com > http://www.ShifterSafetygear.com > http://www.SharkShifter.com > http://www.PatsAcres.com > http://www.RSwyers.com/ Bro's site > http://www.EKartingnews.com > http://www.CART.com > `�.��.���`�.��.���`�.��.�><((((�>���`�.��.�><((((�> > ���`�.��.�><((((�>�`�.��.���`�.��.�><((((�> > > > >
Ehh, sorry I wasnt aware of that. Take care, TG -- _ _ _ _ _ _ _ _ _ _ _ _ _ Tony Gaylord - Vancouver, WA *USA* http://y42.photos.yahoo.com/teampaultracy - Personal/Karting Pics http://www.NationalKarting.com http://www.ShifterSafetygear.com http://www.SharkShifter.com http://www.PatsAcres.com http://www.RSwyers.com/ Bro's site http://www.EKartingnews.com http://www.CART.com `�.��.���`�.��.���`�.��.�><((((�>���`�.��.�><((((�> ���`�.��.�><((((�>�`�.��.���`�.��.�><((((�> "spazz" <[email hidden]?> wrote in message news:[email hidden]... > On Thu, 02 May 2002 01:59:31 GMT, "Tony Gaylord" <[email hidden]> wrote: > > Tony, please don't attach binaries in this newsgroup. > > Thanks. > > >Folks, whats happening here?! :) Not patting my own back here or bragging > >but my system is solid as a rock and have had only 1 title over a year ago > >give me headaches on install. When I launch, I get the dreaded Invalid Page > >Fault - error PRD.EXE. > > > >ok fine, I go into setup, get a page fault there too. Like I said, > >everything (drivers etc) are very much up to date and installed correctly. > >For sh*ts and giggles, I un-installed, D/L from (2) different mirrors and > >each time, same invalid page fault's. > >Latest Det drivers, current DX8 yadda, yadda, yadda.... :) > > > >Anyone else? Any fixes here? > >130mph, 6 speed rocket :) > > > >Tony Gaylord > >
M - Get a life man, think about it, its just a photo. No crime here, just wasnt 100% sure about posting it. A little 'off' subject if you will, sue me. Meaningless BS? Its "REAL" racing isnt it? Maybe you should getout behind that monitor and enjoy some real racing sometime. And it was just a waste? Like I took a lot of time out of your day? Sorry to have let you down, I wasnt aware that a screenshot of the error was so meaning to you. Perhaps I could post that? *grin* *TG* -- _ _ _ _ _ _ _ _ _ _ _ _ _ Tony Gaylord - Vancouver, WA *USA* http://y42.photos.yahoo.com/teampaultracy - Personal/Karting Pics http://www.NationalKarting.com http://www.ShifterSafetygear.com http://www.SharkShifter.com http://www.PatsAcres.com http://www.RSwyers.com/ Bro's site http://www.EKartingnews.com http://www.CART.com `�.��.���`�.��.���`�.��.�><((((�>���`�.��.�><((((�> ���`�.��.�><((((�>�`�.��.���`�.��.�><((((�> "M. Main" <[email hidden]> wrote in message news:3cd12540$[email hidden]... > and the point behind the 115kb photograph of something not even pertaining > to the subject is what?! > > > do not attach meaningless BS. I thought perhaps it was a screenshot of the > error, but no, its nothing but a waste. > > > > "Tony Gaylord" <[email hidden]> wrote in message > news:741A8.7065$[email hidden]... > > Folks, whats happening here?! :) Not patting my own back here or bragging > > but my system is solid as a rock and have had only 1 title over a year ago > > give me headaches on install. When I launch, I get the dreaded Invalid > Page > > Fault - error PRD.EXE. > > > > ok fine, I go into setup, get a page fault there too. Like I said, > > everything (drivers etc) are very much up to date and installed correctly. > > For sh*ts and giggles, I un-installed, D/L from (2) different mirrors and > > each time, same invalid page fault's. > > Latest Det drivers, current DX8 yadda, yadda, yadda.... :) > > > > Anyone else? Any fixes here? > > 130mph, 6 speed rocket :) > > > > Tony Gaylord > > > > -- > > _ _ _ _ _ _ _ _ _ _ _ _ _ > > Tony Gaylord - Vancouver, WA *USA* > > > > http://y42.photos.yahoo.com/teampaultracy - Personal/Karting Pics > > http://www.NationalKarting.com > > http://www.ShifterSafetygear.com > > http://www.SharkShifter.com > > http://www.PatsAcres.com > > http://www.RSwyers.com/ Bro's site > > http://www.EKartingnews.com > > http://www.CART.com > > `�.��.���`�.��.���`�.��.�><((((�>���`�.��.�><((((�> > > ���`�.��.�><((((�>�`�.��.���`�.��.�><((((�> > > > > > > > > > >
On Fri, 03 May 2002 01:27:31 GMT, "Tony Gaylord" <[email hidden]> wrote: >Get a life man, think about it, its just a photo. plonk
woooooooooooooooooooooooosh -- M. Main [email hidden] www.LordsOfAcid.com / www.ChildrenOfAcid.com Maturation makes liars of us all. "Tony Gaylord" <[email hidden]> wrote in message news:7IlA8.36734$D%5.5437@sccrnsc01... > M - > Get a life man, think about it, its just a photo. No crime here, just wasnt > 100% sure about posting it. A little 'off' subject if you will, sue me. > > Meaningless BS? Its "REAL" racing isnt it? Maybe you should getout behind > that monitor and enjoy some real racing sometime. > And it was just a waste? Like I took a lot of time out of your day? Sorry to > have let you down, I wasnt aware that a screenshot of the error was so > meaning to you. Perhaps I could post that? *grin* > > *TG* > -- > _ _ _ _ _ _ _ _ _ _ _ _ _ > Tony Gaylord - Vancouver, WA *USA* > > http://y42.photos.yahoo.com/teampaultracy - Personal/Karting Pics > http://www.NationalKarting.com > http://www.ShifterSafetygear.com > http://www.SharkShifter.com > http://www.PatsAcres.com > http://www.RSwyers.com/ Bro's site > http://www.EKartingnews.com > http://www.CART.com > `�.��.���`�.��.���`�.��.�><((((�>���`�.��.�><((((�> > ���`�.��.�><((((�>�`�.��.���`�.��.�><((((�> > > "M. Main" <[email hidden]> wrote in message > news:3cd12540$[email hidden]... > > and the point behind the 115kb photograph of something not even pertaining > > to the subject is what?! > > > > > > do not attach meaningless BS. I thought perhaps it was a screenshot of the > > error, but no, its nothing but a waste. > > > > > > > > "Tony Gaylord" <[email hidden]> wrote in message > > news:741A8.7065$[email hidden]... > > > Folks, whats happening here?! :) Not patting my own back here or > bragging > > > but my system is solid as a rock and have had only 1 title over a year > ago > > > give me headaches on install. When I launch, I get the dreaded Invalid > > Page > > > Fault - error PRD.EXE. > > > > > > ok fine, I go into setup, get a page fault there too. Like I said, > > > everything (drivers etc) are very much up to date and installed > correctly. > > > For sh*ts and giggles, I un-installed, D/L from (2) different mirrors > and > > > each time, same invalid page fault's. > > > Latest Det drivers, current DX8 yadda, yadda, yadda.... :) > > > > > > Anyone else? Any fixes here? > > > 130mph, 6 speed rocket :) > > > > > > Tony Gaylord > > > > > > -- > > > _ _ _ _ _ _ _ _ _ _ _ _ _ > > > Tony Gaylord - Vancouver, WA *USA* > > > > > > http://y42.photos.yahoo.com/teampaultracy - Personal/Karting Pics > > > http://www.NationalKarting.com > > > http://www.ShifterSafetygear.com > > > http://www.SharkShifter.com > > > http://www.PatsAcres.com > > > http://www.RSwyers.com/ Bro's site > > > http://www.EKartingnews.com > > > http://www.CART.com > > > `�.��.���`�.��.���`�.��.�><((((�>���`�.��.�><((((�> > > > ���`�.��.�><((((�>�`�.��.���`�.��.�><((((�> > > > > > > > > > > > > > > > > > >
you're right, it's REAL racing, im sorry, you may want to go to www.dictionary.com and look up the word "simulators" because, this newsgroup pertains to SIMULATION, not REAL. you're photo, in you're post was a waste of our time. It was pointless. Sure, we're glad you sit on a soapbox, we're glad you race, but 115k pictures are not needed in a post to show us. -- M. Main [email hidden] www.LordsOfAcid.com / www.ChildrenOfAcid.com Maturation makes liars of us all. "Tony Gaylord" <[email hidden]> wrote in message news:7IlA8.36734$D%5.5437@sccrnsc01... > M - > Get a life man, think about it, its just a photo. No crime here, just wasnt > 100% sure about posting it. A little 'off' subject if you will, sue me. > > Meaningless BS? Its "REAL" racing isnt it? Maybe you should getout behind > that monitor and enjoy some real racing sometime. > And it was just a waste? Like I took a lot of time out of your day? Sorry to > have let you down, I wasnt aware that a screenshot of the error was so > meaning to you. Perhaps I could post that? *grin* > > *TG* > -- > _ _ _ _ _ _ _ _ _ _ _ _ _ > Tony Gaylord - Vancouver, WA *USA* > > http://y42.photos.yahoo.com/teampaultracy - Personal/Karting Pics > http://www.NationalKarting.com > http://www.ShifterSafetygear.com > http://www.SharkShifter.com > http://www.PatsAcres.com > http://www.RSwyers.com/ Bro's site > http://www.EKartingnews.com > http://www.CART.com > `�.��.���`�.��.���`�.��.�><((((�>���`�.��.�><((((�> > ���`�.��.�><((((�>�`�.��.���`�.��.�><((((�> > > "M. Main" <[email hidden]> wrote in message > news:3cd12540$[email hidden]... > > and the point behind the 115kb photograph of something not even pertaining > > to the subject is what?! > > > > > > do not attach meaningless BS. I thought perhaps it was a screenshot of the > > error, but no, its nothing but a waste. > > > > > > > > "Tony Gaylord" <[email hidden]> wrote in message > > news:741A8.7065$[email hidden]... > > > Folks, whats happening here?! :) Not patting my own back here or > bragging > > > but my system is solid as a rock and have had only 1 title over a year > ago > > > give me headaches on install. When I launch, I get the dreaded Invalid > > Page > > > Fault - error PRD.EXE. > > > > > > ok fine, I go into setup, get a page fault there too. Like I said, > > > everything (drivers etc) are very much up to date and installed > correctly. > > > For sh*ts and giggles, I un-installed, D/L from (2) different mirrors > and > > > each time, same invalid page fault's. > > > Latest Det drivers, current DX8 yadda, yadda, yadda.... :) > > > > > > Anyone else? Any fixes here? > > > 130mph, 6 speed rocket :) > > > > > > Tony Gaylord > > > > > > -- > > > _ _ _ _ _ _ _ _ _ _ _ _ _ > > > Tony Gaylord - Vancouver, WA *USA* > > > > > > http://y42.photos.yahoo.com/teampaultracy - Personal/Karting Pics > > > http://www.NationalKarting.com > > > http://www.ShifterSafetygear.com > > > http://www.SharkShifter.com > > > http://www.PatsAcres.com > > > http://www.RSwyers.com/ Bro's site > > > http://www.EKartingnews.com > > > http://www.CART.com > > > `�.��.���`�.��.���`�.��.�><((((�>���`�.��.�><((((�> > > > ���`�.��.�><((((�>�`�.��.���`�.��.�><((((�> > > > > > > > > > > > > > > > > > >
No, I know the difference, I don't think I need to check out a dictionary, but thanks. God for bid someone may make a statement regarding real racing, maybe a comparison to REAL racing (ala simulation right) might get the wrath of M Main coming down on you. I wasn't aware that you were a moderator of this NG nor did you run this NG. Move on- PS: Your statement is obviously lacking any fact or knowledge. With out REAL racing what in the hell would a "simulation" be "simulating" anyway? Maybe you can answer that. Put your VR goggles back on and race on into the vectors- -- _ _ _ _ _ _ _ _ _ _ _ _ _ Tony Gaylord - Vancouver, WA *USA* http://y42.photos.yahoo.com/teampaultracy - Personal/Karting Pics http://www.NationalKarting.com http://www.ShifterSafetygear.com http://www.SharkShifter.com http://www.PatsAcres.com http://www.RSwyers.com/ Bro's site http://www.EKartingnews.com http://www.CART.com `�.��.���`�.��.���`�.��.�><((((�>���`�.��.�><((((�> ���`�.��.�><((((�>�`�.��.���`�.��.�><((((�> "M. Main" <[email hidden]> wrote in message news:3cd21d8e$[email hidden]... > you're right, it's REAL racing, im sorry, you may want to go to > www.dictionary.com and look up the word "simulators" because, this newsgroup > pertains to SIMULATION, not REAL. you're photo, in you're post was a waste > of our time. It was pointless. Sure, we're glad you sit on a soapbox, we're > glad you race, but 115k pictures are not needed in a post to show us. > > -- > M. Main > [email hidden] > www.LordsOfAcid.com / www.ChildrenOfAcid.com > Maturation makes liars of us all. > > > "Tony Gaylord" <[email hidden]> wrote in message > news:7IlA8.36734$D%5.5437@sccrnsc01... > > M - > > Get a life man, think about it, its just a photo. No crime here, just > wasnt > > 100% sure about posting it. A little 'off' subject if you will, sue me. > > > > Meaningless BS? Its "REAL" racing isnt it? Maybe you should getout behind > > that monitor and enjoy some real racing sometime. > > And it was just a waste? Like I took a lot of time out of your day? Sorry > to > > have let you down, I wasnt aware that a screenshot of the error was so > > meaning to you. Perhaps I could post that? *grin* > > > > *TG* > > -- > > _ _ _ _ _ _ _ _ _ _ _ _ _ > > Tony Gaylord - Vancouver, WA *USA* > > > > http://y42.photos.yahoo.com/teampaultracy - Personal/Karting Pics > > http://www.NationalKarting.com > > http://www.ShifterSafetygear.com > > http://www.SharkShifter.com > > http://www.PatsAcres.com > > http://www.RSwyers.com/ Bro's site > > http://www.EKartingnews.com > > http://www.CART.com > > `�.��.���`�.��.���`�.��.�><((((�>���`�.��.�><((((�> > > ���`�.��.�><((((�>�`�.��.���`�.��.�><((((�> > > > > "M. Main" <[email hidden]> wrote in message > > news:3cd12540$[email hidden]... > > > and the point behind the 115kb photograph of something not even > pertaining > > > to the subject is what?! > > > > > > > > > do not attach meaningless BS. I thought perhaps it was a screenshot of > the > > > error, but no, its nothing but a waste. > > > > > > > > > > > > "Tony Gaylord" <[email hidden]> wrote in message > > > news:741A8.7065$[email hidden]... > > > > Folks, whats happening here?! :) Not patting my own back here or > > bragging > > > > but my system is solid as a rock and have had only 1 title over a year > > ago > > > > give me headaches on install. When I launch, I get the dreaded Invalid > > > Page > > > > Fault - error PRD.EXE. > > > > > > > > ok fine, I go into setup, get a page fault there too. Like I said, > > > > everything (drivers etc) are very much up to date and installed > > correctly. > > > > For sh*ts and giggles, I un-installed, D/L from (2) different mirrors > > and > > > > each time, same invalid page fault's. > > > > Latest Det drivers, current DX8 yadda, yadda, yadda.... :) > > > > > > > > Anyone else? Any fixes here? > > > > 130mph, 6 speed rocket :) > > > > > > > > Tony Gaylord > > > > > > > > -- > > > > _ _ _ _ _ _ _ _ _ _ _ _ _ > > > > Tony Gaylord - Vancouver, WA *USA* > > > > > > > > http://y42.photos.yahoo.com/teampaultracy - Personal/Karting Pics > > > > http://www.NationalKarting.com > > > > http://www.ShifterSafetygear.com > > > > http://www.SharkShifter.com > > > > http://www.PatsAcres.com > > > > http://www.RSwyers.com/ Bro's site > > > > http://www.EKartingnews.com > > > > http://www.CART.com > > > > `�.��.���`�.��.���`�.��.�><((((�>���`�.��.�><((((�> > > > > ���`�.��.�><((((�>�`�.��.���`�.��.�><((((�> > > > > > > > > > > > > > > > > > > > > > > > > > > > >
whatever you say Gaylord Focker -- M. Main [email hidden] www.LordsOfAcid.com / www.ChildrenOfAcid.com Maturation makes liars of us all. "Tony Gaylord" <[email hidden]> wrote in message news:JtpA8.44834$vX.4212@rwcrnsc53... > No, I know the difference, I don't think I need to check out a dictionary, > but thanks. > God for bid someone may make a statement regarding real racing, maybe a > comparison to REAL racing (ala simulation right) might get the wrath of M > Main coming down on you. I wasn't aware that you were a moderator of this NG > nor did you run this NG. > Move on- > > PS: Your statement is obviously lacking any fact or knowledge. With out REAL > racing what in the hell would a "simulation" be "simulating" anyway? Maybe > you can answer that. > Put your VR goggles back on and race on into the vectors- > > -- > _ _ _ _ _ _ _ _ _ _ _ _ _ > Tony Gaylord - Vancouver, WA *USA* > > http://y42.photos.yahoo.com/teampaultracy - Personal/Karting Pics > http://www.NationalKarting.com > http://www.ShifterSafetygear.com > http://www.SharkShifter.com > http://www.PatsAcres.com > http://www.RSwyers.com/ Bro's site > http://www.EKartingnews.com > http://www.CART.com > `�.��.���`�.��.���`�.��.�><((((�>���`�.��.�><((((�> > ���`�.��.�><((((�>�`�.��.���`�.��.�><((((�> > > "M. Main" <[email hidden]> wrote in message > news:3cd21d8e$[email hidden]... > > you're right, it's REAL racing, im sorry, you may want to go to > > www.dictionary.com and look up the word "simulators" because, this > newsgroup > > pertains to SIMULATION, not REAL. you're photo, in you're post was a waste > > of our time. It was pointless. Sure, we're glad you sit on a soapbox, > we're > > glad you race, but 115k pictures are not needed in a post to show us. > > > > -- > > M. Main > > [email hidden] > > www.LordsOfAcid.com / www.ChildrenOfAcid.com > > Maturation makes liars of us all. > > > > > > "Tony Gaylord" <[email hidden]> wrote in message > > news:7IlA8.36734$D%5.5437@sccrnsc01... > > > M - > > > Get a life man, think about it, its just a photo. No crime here, just > > wasnt > > > 100% sure about posting it. A little 'off' subject if you will, sue me. > > > > > > Meaningless BS? Its "REAL" racing isnt it? Maybe you should getout > behind > > > that monitor and enjoy some real racing sometime. > > > And it was just a waste? Like I took a lot of time out of your day? > Sorry > > to > > > have let you down, I wasnt aware that a screenshot of the error was so > > > meaning to you. Perhaps I could post that? *grin* > > > > > > *TG* > > > -- > > > _ _ _ _ _ _ _ _ _ _ _ _ _ > > > Tony Gaylord - Vancouver, WA *USA* > > > > > > http://y42.photos.yahoo.com/teampaultracy - Personal/Karting Pics > > > http://www.NationalKarting.com > > > http://www.ShifterSafetygear.com > > > http://www.SharkShifter.com > > > http://www.PatsAcres.com > > > http://www.RSwyers.com/ Bro's site > > > http://www.EKartingnews.com > > > http://www.CART.com > > > `�.��.���`�.��.���`�.��.�><((((�>���`�.��.�><((((�> > > > ���`�.��.�><((((�>�`�.��.���`�.��.�><((((�> > > > > > > "M. Main" <[email hidden]> wrote in message > > > news:3cd12540$[email hidden]... > > > > and the point behind the 115kb photograph of something not even > > pertaining > > > > to the subject is what?! > > > > > > > > > > > > do not attach meaningless BS. I thought perhaps it was a screenshot of > > the > > > > error, but no, its nothing but a waste. > > > > > > > > > > > > > > > > "Tony Gaylord" <[email hidden]> wrote in message > > > > news:741A8.7065$[email hidden]... > > > > > Folks, whats happening here?! :) Not patting my own back here or > > > bragging > > > > > but my system is solid as a rock and have had only 1 title over a > year > > > ago > > > > > give me headaches on install. When I launch, I get the dreaded > Invalid > > > > Page > > > > > Fault - error PRD.EXE. > > > > > > > > > > ok fine, I go into setup, get a page fault there too. Like I said, > > > > > everything (drivers etc) are very much up to date and installed > > > correctly. > > > > > For sh*ts and giggles, I un-installed, D/L from (2) different > mirrors > > > and > > > > > each time, same invalid page fault's. > > > > > Latest Det drivers, current DX8 yadda, yadda, yadda.... :) > > > > > > > > > > Anyone else? Any fixes here? > > > > > 130mph, 6 speed rocket :) > > > > > > > > > > Tony Gaylord > > > > > > > > > > -- > > > > > _ _ _ _ _ _ _ _ _ _ _ _ _ > > > > > Tony Gaylord - Vancouver, WA *USA* > > > > > > > > > > http://y42.photos.yahoo.com/teampaultracy - Personal/Karting Pics > > > > > http://www.NationalKarting.com > > > > > http://www.ShifterSafetygear.com > > > > > http://www.SharkShifter.com > > > > > http://www.PatsAcres.com > > > > > http://www.RSwyers.com/ Bro's site > > > > > http://www.EKartingnews.com > > > > > http://www.CART.com > > > > > `�.��.���`�.��.���`�.��.�><((((�>���`�.��.�><((((�> > > > > > ���`�.��.�><((((�>�`�.��.���`�.��.�><((((�> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
ROTFL! BTW, welcome to the "People Who Have Been Kill-filed by Spazz" Club, one of the fastest growing clubs on the internet. Do whatever you want bud, don't listen to dweebs who are apparently still trying to use a 2400 baud modem and a text based news reader. "Tony Gaylord" <[email hidden]> wrote in message news:JtpA8.44834$vX.4212@rwcrnsc53... > No, I know the difference, I don't think I need to check out adictionary, > but thanks. > God for bid someone may make a statement regarding real racing, maybea > comparison to REAL racing (ala simulation right) might get the wrathof M > Main coming down on you. I wasn't aware that you were a moderator ofthis NG > nor did you run this NG. > Move on- > > PS: Your statement is obviously lacking any fact or knowledge. Without REAL > racing what in the hell would a "simulation" be "simulating" anyway?Maybe
Quoted text (24 lines)> you can answer that. > Put your VR goggles back on and race on into the vectors- > > -- > _ _ _ _ _ _ _ _ _ _ _ _ _ > Tony Gaylord - Vancouver, WA *USA* > > http://y42.photos.yahoo.com/teampaultracy - Personal/Karting Pics > http://www.NationalKarting.com > http://www.ShifterSafetygear.com > http://www.SharkShifter.com > http://www.PatsAcres.com > http://www.RSwyers.com/ Bro's site > http://www.EKartingnews.com > http://www.CART.com > `�.��.���`�.��.���`�.��.�><((((�>���`�.��.�><((((�> > ���`�.��.�><((((�>�`�.��.���`�.��.�><((((�> > > "M. Main" <[email hidden]> wrote in message > news:3cd21d8e$[email hidden]... > > you're right, it's REAL racing, im sorry, you may want to go to > > www.dictionary.com and look up the word "simulators" because, this > newsgroup > > pertains to SIMULATION, not REAL. you're photo, in you're post was a
waste > > of our time. It was pointless. Sure, we're glad you sit on asoapbox, > we're > > glad you race, but 115k pictures are not needed in a post to showus.
Quoted text (12 lines)> > > > -- > > M. Main > > [email hidden] > > www.LordsOfAcid.com / www.ChildrenOfAcid.com > > Maturation makes liars of us all. > > > > > > "Tony Gaylord" <[email hidden]> wrote in message > > news:7IlA8.36734$D%5.5437@sccrnsc01... > > > M - > > > Get a life man, think about it, its just a photo. No crime here,
just > > wasnt > > > 100% sure about posting it. A little 'off' subject if you will,sue me. > > > > > > Meaningless BS? Its "REAL" racing isnt it? Maybe you should getout > behind > > > that monitor and enjoy some real racing sometime. > > > And it was just a waste? Like I took a lot of time out of yourday? > Sorry > > to > > > have let you down, I wasnt aware that a screenshot of the errorwas so
Quoted text (26 lines)> > > meaning to you. Perhaps I could post that? *grin* > > > > > > *TG* > > > -- > > > _ _ _ _ _ _ _ _ _ _ _ _ _ > > > Tony Gaylord - Vancouver, WA *USA* > > > > > > http://y42.photos.yahoo.com/teampaultracy - Personal/Karting Pics > > > http://www.NationalKarting.com > > > http://www.ShifterSafetygear.com > > > http://www.SharkShifter.com > > > http://www.PatsAcres.com > > > http://www.RSwyers.com/ Bro's site > > > http://www.EKartingnews.com > > > http://www.CART.com > > > `�.��.���`�.��.���`�.��.�><((((�>���`�.��.�><((((�> > > > ���`�.��.�><((((�>�`�.��.���`�.��.�><((((�> > > > > > > "M. Main" <[email hidden]> wrote in message > > > news:3cd12540$[email hidden]... > > > > and the point behind the 115kb photograph of something not even > > pertaining > > > > to the subject is what?! > > > > > > > > > > > > do not attach meaningless BS. I thought perhaps it was a
screenshot of
Quoted text (8 lines)> > the > > > > error, but no, its nothing but a waste. > > > > > > > > > > > > > > > > "Tony Gaylord" <[email hidden]> wrote in message > > > > news:741A8.7065$[email hidden]... > > > > > Folks, whats happening here?! :) Not patting my own back here
or > > > bragging > > > > > but my system is solid as a rock and have had only 1 titleover a
Quoted text (8 lines)> year > > > ago > > > > > give me headaches on install. When I launch, I get the dreaded > Invalid > > > > Page > > > > > Fault - error PRD.EXE. > > > > > > > > > > ok fine, I go into setup, get a page fault there too. Like I
said, > > > > > everything (drivers etc) are very much up to date andinstalled
Quoted text (17 lines)> > > correctly. > > > > > For sh*ts and giggles, I un-installed, D/L from (2) different > mirrors > > > and > > > > > each time, same invalid page fault's. > > > > > Latest Det drivers, current DX8 yadda, yadda, yadda.... :) > > > > > > > > > > Anyone else? Any fixes here? > > > > > 130mph, 6 speed rocket :) > > > > > > > > > > Tony Gaylord > > > > > > > > > > -- > > > > > _ _ _ _ _ _ _ _ _ _ _ _ _ > > > > > Tony Gaylord - Vancouver, WA *USA* > > > > > > > > > > http://y42.photos.yahoo.com/teampaultracy - Personal/Karting
Pics
Quoted text (21 lines)> > > > > http://www.NationalKarting.com > > > > > http://www.ShifterSafetygear.com > > > > > http://www.SharkShifter.com > > > > > http://www.PatsAcres.com > > > > > http://www.RSwyers.com/ Bro's site > > > > > http://www.EKartingnews.com > > > > > http://www.CART.com > > > > > `�.��.���`�.��.���`�.��.�><((((�>���`�.��.�><((((�> > > > > > ���`�.��.�><((((�>�`�.��.���`�.��.�><((((�> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
Vennt 04 May 2002 01:10 UTC↳ reply to M. Main#122133
A little bit hypocritical if you ask me, moaning at someone breaking usenet's "rules" and then resorting to personal insults / flames which are supposed to be equally 'wrong' on usenet, ok it's one of the guidelines thats broken the most, that does not make it anymore acceptable, to me. Vennt. "M. Main" <[email hidden]> wrote in message news:3cd231c5$[email hidden]... > whatever you say Gaylord Focker
"M. Main" <[email hidden]> wrote in message news:3cd231c5$[email hidden]... > whatever you say Gaylord Focker > > > >PLONK. Go back to quake.

Sponsors

Affiliate Links

Sim Gaming Expo MOZA Racing Sim-Lab Fanatec TrakRacer Asetek Internet Privacy From NordVPN Dreamhost Capital One Credit Card Application Fanatical CDKeys Amazon Amazon UK Project Motor Racing iRacing Get your racing gloves, boots and more from Demon Tweeks. Enlist at Roberts Space Industries, developers of Star Citizen and Squadron 42


Back from the ashes since July, 2019. First created in 2001 with the merger of Legends Central (founded 1999) and simracing.dk.

A site by a sort of sim racer, for sim racers, about racing sims. News and information on both modern and historic sim racing software titles.

All products and licenses property of their respective owners.


Facebook Threads Bluesky Twitter Mastodon Instagram YouTube Tiktok Twitch Reddit Google News Apple News Subscribe via WordPress Flipboard eBay

Race Sim Central © 1999-2026 | Some links pay RSC a commission. Advertising does not equal endorsement.Cookie Policy