I have to put in a new spring, so I have the pedal out of the box. There are
the springs in the middle, they are around a rod. I do not know how to move
the rod out, so that I can install the new springs. Any ideas on how to mvoe
this? One idea I have is to just put a screw driver in one end and use a
hammer to ram it out, but am afraid that will break the plastic. Thanks.
-Stuart Becktell
NM, found the notch you throw the screw driver into
"Stuart Becktell" <[email hidden]> wrote in message
news:q04T8.66315$[email hidden]...
> I have to put in a new spring, so I have the pedal out of the box. Thereare
> the springs in the middle, they are around a rod. I do not know how tomove
> the rod out, so that I can install the new springs. Any ideas on how tomvoe
> this? One idea I have is to just put a screw driver in one end and use a
> hammer to ram it out, but am afraid that will break the plastic. Thanks.
> -Stuart Becktell
>
>
IIRC, the screwdriver and hammer trick work nicely.... just be careful and
dont smash the thing.
I've changed springs on my set - but I cannot remember for sure how I did
it... Some pictures of it might help bring back the memory though.
--
ed_
"Stuart Becktell" <[email hidden]> skrev i melding
news:q04T8.66315$[email hidden]...
> I have to put in a new spring, so I have the pedal out of the box. There
are
> the springs in the middle, they are around a rod. I do not know how to
move
> the rod out, so that I can install the new springs. Any ideas on how to
mvoe
> this? One idea I have is to just put a screw driver in one end and use a
> hammer to ram it out, but am afraid that will break the plastic. Thanks.
> -Stuart Becktell
>
>
