F12002 and VooDoo?

Is there any way to get it to work? I can't get the demo running. I almost went to EB and bought the release, does that support VooDoo? Is there a trick or a patch? -- "Boy! You've got to have really big attachments to try a pass there... and make it." - David Hobbs mark

As i said in the post below it works on mine altho not to fast. I have the latest xp V5 drivers if that helps. dan "mark jeangerard" <[email hidden]> wrote in message news:onY%8.49884$[email hidden]...

Quoted text (14 lines)

> Is there any way to get it to work? I can't get the demo running. I almost > went to EB and bought the release, does that support VooDoo? Is there a > trick or a patch? > > -- > > "Boy! You've got to have really big attachments to try a pass there... and > make it." > - David Hobbs > > mark > > >

Dagnabbit. I can't get the demo to work. It won't even load, just crashes with a page fault. -- "Boy! You've got to have really big attachments to try a pass there... and make it." - David Hobbs mark "Dan Leach" <[email hidden]> wrote in message news:ahplp7$tu9h6$[email hidden]... > As i said in the post below it works on mine altho not to fast. I have the > latest xp V5 drivers if that helps. > dan > "mark jeangerard" <[email hidden]> wrote in message > news:onY%8.49884$[email hidden]... > > Is there any way to get it to work? I can't get the demo running. I almost > > went to EB and bought the release, does that support VooDoo? Is there a > > trick or a patch? > > > > -- > > > > "Boy! You've got to have really big attachments to try a pass there... and > > make it." > > - David Hobbs > > > > mark > > > > > > > >

Mark do you have a V5? That should work, although at a disadvantage, but a V3 will NOT work, there just isn't enough texture memory. dave henrie "mark jeangerard" <[email hidden]> wrote in message news:Sq109.1066$[email hidden]...

Quoted text (13 lines)

> Dagnabbit. I can't get the demo to work. It won't even load, just crashes > with a page fault. > > -- > > "Boy! You've got to have really big attachments to try a pass there... and > make it." > - David Hobbs > > mark > "Dan Leach" <[email hidden]> wrote in message > news:ahplp7$tu9h6$[email hidden]... > > As i said in the post below it works on mine altho not to fast. I have

the

Quoted text (7 lines)

> > latest xp V5 drivers if that helps. > > dan > > "mark jeangerard" <[email hidden]> wrote in message > > news:onY%8.49884$[email hidden]... > > > Is there any way to get it to work? I can't get the demo running. I > almost > > > went to EB and bought the release, does that support VooDoo? Is there

a

Quoted text (18 lines)

> > > trick or a patch? > > > > > > -- > > > > > > "Boy! You've got to have really big attachments to try a pass there... > and > > > make it." > > > - David Hobbs > > > > > > mark > > > > > > > > > > > > > > > >

I have to give myself a big DUH!. I jut now checked DXDiag and found I have DX8. (And a VooDoo 5 5500AGP as I suspected.) So, you must have 8.1. Was the upgrade pain free with the V5? Should I do it? -- "Boy! You've got to have really big attachments to try a pass there... and make it." - David Hobbs mark "Dave Henrie" <[email hidden]> wrote in message news:hy109.646340$352.137056@sccrnsc02... > Mark do you have a V5? That should work, although at a disadvantage, but > a V3 will NOT work, there just isn't enough texture memory. > dave henrie > > > "mark jeangerard" <[email hidden]> wrote in message > news:Sq109.1066$[email hidden]... > > Dagnabbit. I can't get the demo to work. It won't even load, just crashes > > with a page fault. > > > > -- > > > > "Boy! You've got to have really big attachments to try a pass there... and > > make it." > > - David Hobbs > > > > mark > > "Dan Leach" <[email hidden]> wrote in message > > news:ahplp7$tu9h6$[email hidden]... > > > As i said in the post below it works on mine altho not to fast. I have > the > > > latest xp V5 drivers if that helps. > > > dan > > > "mark jeangerard" <[email hidden]> wrote in message > > > news:onY%8.49884$[email hidden]... > > > > Is there any way to get it to work? I can't get the demo running. I > > almost > > > > went to EB and bought the release, does that support VooDoo? Is there > a > > > > trick or a patch? > > > > > > > > -- > > > > > > > > "Boy! You've got to have really big attachments to try a pass there... > > and > > > > make it." > > > > - David Hobbs > > > > > > > > mark > > > > > > > > > > > > > > > > > > > > > > > > > >

In article <onY%8.49884$[email hidden]>, [email hidden] says... > Is there any way to get it to work? I can't get the demo running. I almost > went to EB and bought the release, does that support VooDoo? Is there a > trick or a patch? Assuming we are talking Voodoo5 ... I found disabling "Geometry Assist" under 3df/xTools Advanced Features - Direct3D then rebooting did the trick for me using the last "official" drivers (1.04) for both the demo and retail version of F1-2002. Regards ...

At least with F12002 and GP32K anyway. Haven't tried anything else. -- "Boy! You've got to have really big attachments to try a pass there... and make it." - David Hobbs mark "mark jeangerard" <[email hidden]> wrote in message news:lA109.1089$[email hidden]... > I have to give myself a big DUH!. I jut now checked DXDiag and found I have > DX8. (And a VooDoo 5 5500AGP as I suspected.) > > So, you must have 8.1. Was the upgrade pain free with the V5? Should I do > it? > > -- > > "Boy! You've got to have really big attachments to try a pass there... and > make it." > - David Hobbs > > mark > > "Dave Henrie" <[email hidden]> wrote in message > news:hy109.646340$352.137056@sccrnsc02... > > Mark do you have a V5? That should work, although at a disadvantage, > but > > a V3 will NOT work, there just isn't enough texture memory. > > dave henrie > > > > > > "mark jeangerard" <[email hidden]> wrote in message > > news:Sq109.1066$[email hidden]... > > > Dagnabbit. I can't get the demo to work. It won't even load, just > crashes > > > with a page fault. > > > > > > -- > > > > > > "Boy! You've got to have really big attachments to try a pass there... > and > > > make it." > > > - David Hobbs > > > > > > mark > > > "Dan Leach" <[email hidden]> wrote in message > > > news:ahplp7$tu9h6$[email hidden]... > > > > As i said in the post below it works on mine altho not to fast. I have > > the > > > > latest xp V5 drivers if that helps. > > > > dan > > > > "mark jeangerard" <[email hidden]> wrote in message > > > > news:onY%8.49884$[email hidden]... > > > > > Is there any way to get it to work? I can't get the demo running. I > > > almost > > > > > went to EB and bought the release, does that support VooDoo? Is > there > > a > > > > > trick or a patch? > > > > > > > > > > -- > > > > > > > > > > "Boy! You've got to have really big attachments to try a pass > there... > > > and > > > > > make it." > > > > > - David Hobbs > > > > > > > > > > mark > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >

In article <lA109.1089$[email hidden]>, "mark jeangerard" <[email hidden]> writes: >I have to give myself a big DUH!. I jut now checked DXDiag and found I have >DX8. (And a VooDoo 5 5500AGP as I suspected.) > >So, you must have 8.1. Was the upgrade pain free with the V5? Should I do >it? Dx8.1 and a V5 doesn't cause a problem. I loaded it when I installed N2002 or Star Wars Clone Campaign - one of the two. Eldred -- Homepage - http://www.umich.edu/~epickett My .sig file is in the shop for repairs... Remove SPAM-OFF to reply.

Cool, I installed it, and I got everything working except for the 'generic controller driver' in GPL. All I can use now is 'direct input'. Any ideas on that one? -- mark "EldredP" <[email hidden]> wrote in message news:[email hidden]... > In article <lA109.1089$[email hidden]>, "mark jeangerard" > <[email hidden]> writes: > > >I have to give myself a big DUH!. I jut now checked DXDiag and found I have > >DX8. (And a VooDoo 5 5500AGP as I suspected.) > > > >So, you must have 8.1. Was the upgrade pain free with the V5? Should I do > >it? > > Dx8.1 and a V5 doesn't cause a problem. I loaded it when I installed N2002 or > Star Wars Clone Campaign - one of the two. > > Eldred > -- > Homepage - http://www.umich.edu/~epickett > My .sig file is in the shop for repairs... > > Remove SPAM-OFF to reply.

In article <REo19.107392$[email hidden]>, "mark jeangerard" <[email hidden]> writes: >Cool, I installed it, and I got everything working except for the 'generic >controller driver' in GPL. All I can use now is 'direct input'. Any ideas on >that one? Sorry, no. Mine will still let me select either direct or generic... What kind of wheel did you have again? Eldred -- Homepage - http://www.umich.edu/~epickett My .sig file is in the shop for repairs... Remove SPAM-OFF to reply.

Analog, I'm going through the mother board game port. -- "Boy! You've got to have really big attachments to try a pass there... and make it." - David Hobbs mark "EldredP" <[email hidden]> wrote in message news:[email hidden]... > In article <REo19.107392$[email hidden]>, "mark > jeangerard" <[email hidden]> writes: > > >Cool, I installed it, and I got everything working except for the 'generic > >controller driver' in GPL. All I can use now is 'direct input'. Any ideas on > >that one? > > Sorry, no. Mine will still let me select either direct or generic... What > kind of wheel did you have again? > > Eldred > -- > Homepage - http://www.umich.edu/~epickett > My .sig file is in the shop for repairs... > > Remove SPAM-OFF to reply.

In article <1nK19.142074$[email hidden]>, "mark jeangerard" <[email hidden]> writes: >Analog, I'm going through the mother board game port. So's mine(analog, that is). Do you also have a game port on your sound card? Maybe they're conflicting somehow... I have a PDPI card that I use the wheel with, and the port on my SBLive is disabled. Eldred -- Homepage - http://www.umich.edu/~epickett My .sig file is in the shop for repairs... Remove SPAM-OFF to reply.

I do, but I can't figure out how to disable one or the other. No jumpers or anything in the manuals and only the one showing in device manager.... hang on.... ... ...nope. I tried remove and adding the controllers and got nothing. Hmm... DXDIAG says nothing is wrong. Well, CPR works so I'll just take what I got. -- "Boy! You've got to have really big attachments to try a pass there... and make it." - David Hobbs mark "EldredP" <[email hidden]> wrote in message news:[email hidden]... > In article <1nK19.142074$[email hidden]>, "mark > jeangerard" <[email hidden]> writes: > > >Analog, I'm going through the mother board game port. > > So's mine(analog, that is). Do you also have a game port on your sound card? > Maybe they're conflicting somehow... I have a PDPI card that I use the wheel > with, and the port on my SBLive is disabled. > > Eldred > -- > Homepage - http://www.umich.edu/~epickett > My .sig file is in the shop for repairs... > > Remove SPAM-OFF to reply.

In article <bVU19.159587$[email hidden]>, "mark jeangerard" <[email hidden]> writes: >I do, but I can't figure out how to disable one or the other. No jumpers or >anything in the manuals and only the one showing in device manager.... You can disable the one on your sound card in the device manager in Windows. If you'd rather USE that one, you can disable the one on your motherboard through CMOS setup. Eldred -- Homepage - http://www.umich.edu/~epickett My .sig file is in the shop for repairs... Remove SPAM-OFF to reply.

Oh yeah, I forgot about CMOS. I used to use generic because the direct driver would drift over the course of a race. I have retired to occasional (not so) hotlapper though... so far it's working fine. -- "Boy! You've got to have really big attachments to try a pass there... and make it." - David Hobbs mark "EldredP" <[email hidden]> wrote in message news:[email hidden]... > In article <bVU19.159587$[email hidden]>, "mark > jeangerard" <[email hidden]> writes: > > >I do, but I can't figure out how to disable one or the other. No jumpers or > >anything in the manuals and only the one showing in device manager.... > > You can disable the one on your sound card in the device manager in Windows. > If you'd rather USE that one, you can disable the one on your motherboard > through CMOS setup. > > Eldred > -- > Homepage - http://www.umich.edu/~epickett > My .sig file is in the shop for repairs... > > Remove SPAM-OFF to reply.